0
0
NOTICE
When playing back a disc
recorded with the Multi
Session system, the first
session only is played back.
If the first session combines
MP3, WMA and A AC files
and music data (CD-DA), this
product only plays the music
data. (Refer to page 54.)
About handling the
iPod
About iPod settings
This unit supports only an iPod
featuring the Dock connector
port.
Operations may vary depending
on the sof tware version of iPod.
The iPod Equalizer setting set by
the iPod is not used.
The Shuf fle function of the iPod
is operated as Random on this
unit.
•
•
•
•
CAUTION
Store the data into another
media, to avoid losing the
data during iPod operation
with this unit.
Do not allow direct
sunlight to fall on the
iPod when it is not being
used. Extended exposure
to direct sunlight can
result in iPod malfunction
due to the resulting high
temperatures.
Do not leave the iPod in
high temperatures or direct
sunlight.
Fix the iPod securely when
using with this unit. Do not
let the iPod fall onto the floor,
where it may become jammed
under the brake or accelerator
pedal.
•
•
•
•
For details, refer to the User Guide
of your iPod.
63
63
When problems occur with the XM tuner, a message will appear on the display. Refer to the table below to iden-
tif y the problem, then take the suggested corrective action.
The XM Listener Care Center is also available on the phone, please call (800)-967-346 during the following hours:
Mon - Sat: 8 AM - 11 PM EST Sun: 8 PM - 8 PM EST
CK ANTENNA
The XM antenna is not connected.Check whether the XM antenna cable is attached securely.
A short-circuit occurring in the antenna or the surrounding antenna cable.Make sure that there is nothing unusual with the antenna or antenna cable.
NO SIGNALXM signal is too weak at the current location.Wait until your vehicle reaches a location with a stronger signal.
LOADINGUnit is acquiring audio or program information.Wait until the unit has received the information.
CH OFF AIRThe channel you selected is not broadcasting any programming.Select another channel.
CH UNAUTHThe unit is updating the encryption code.Wait until the update is finished.
CH UNAVAILThe unit is receiving a channel with no SID.
