9
9
SSP (Scion Sound Processing)
SSP is a modified DSP (Digital Signal Processing) system that provides a customized sound for your vehicle. Press the ROTARY ENCODER to dis-play the current SSP mode setting. While the setting is displayed, press repeatedly to switch to the following modes.
NATURAL:Natural and smooth sound
that gives no listening
fatigue but comfort.
HEAR:A powerful, energetic, live
sound.
FEEL:
Player’s sound –> reproduc-
es the sound on the stage
that musicians hear.
For more details, please visit the SCION
Web site at
http://www.scion.com/.
Each time you press it, the SSP changes
in the following order:
NATURAL HEAR FEEL
AUDIO CTRL
When the ROTARY ENCODER is turned, the setting item of the AUDIO CTRL menu will switch in the following order:FADER BALANCE BASS TREBLE ASL (Automatic Sound Levelizer) SUB -W (Subwoofer) ASR (Sound Retriever)
•
•
FADER: Turn the ROTARY ENCODER to adjust the sound balance between the rear and front speakers. The display ranges from R7 to F7.BALANCE:Turn the ROTARY ENCODER to adjust the sound balance between the left and right speakers. The display ranges from L7 to R7.
BASS: Turn the ROTARY ENCODER to adjust low-pitched tones. The display ranges from –5 to 5.
TREBLE:
Turn the ROTARY ENCODER to adjust high-pitched tones. The display ranges from –5 to 5.ASL: During driving, noise in the car changes according to the driving speed. The Automatic Sound Levelizer (ASL) automatically adjusts the volume based on driving speed. If this noise becomes greater, the sensitivity (variation of volume level to noise level) of ASL can be set to one of three levels. Press the ROTARY ENCODER changes the ASL setting as follows: LOW MID HIGH OFF
SUB-W:
Subwoofer output phase can be
switched between normal and reverse by pressing the ROTARY ENCODER, Turn the ROTARY ENCODER up or down to adjust the output level of the subwoofer. Each time ROTARY ENCODER is turned up or down, subwoofer level increases or decreases. (+6 to –24 is displayed as the level is increased or decreased.)
•
The output level and output phase
of the subwoofer can be adjusted
only when "SUB -W CTRL" on the
SETUP MENU is set to ON. While
"SUB -W CTRL" is set to OFF, the
output level and output phase cannot be adjusted. (Refer to page 52.)
ASR: The ASR (Sound Retriever) function provides a wide, deep and rich quality to MP3/ WMA/AAC sound, which gives the user a lively impression. Pressing the ROTARY ENCODER repeatedly switches the setting in the following order:LOW RATE HIGH RATE OFF
LOW RATE:
Effective for low- compres-sion audio media.
HIGH RATE:
Effective for high- compres-sion audio media.
