2012 TOYOTA IQ reset

261 3-2. Using the audio system
3
Interior features
iQ_WE_74014E
Setting radio menu
Press and hold until you hear a beep.
appears on the display.
Press to select the menu.
The menu changes as follows each time the button is pressed.
*1: Available only when the vehicle is not moving
*2: FM mode only
AST (P. 262)
Automatically preset
SET*1 (P. 262)
Selecting a station
TP*2 (P. 263)
Traffic information TP mode
TA*2 (P. 263)
Traffic information TA mode
BAS*1 (P. 280)
Adjusting sound quality
TRE*1 (P. 280)
Adjusting sound quality
FA D*1 (P. 280)
Front/rear volume balance
BAL*1 (P. 280)
Left/right volume balance

262 3-2. Using the audio system
iQ_WE_74014E
Setting station presets
Automatically
Press and hold until you hear a beep.
appears on the display.
Press several times until “AST” is displayed.
Press “ ” on to select “ON”.
Up to 6 stations are set in order of reception quality. When the set-
tings are finished, two beeps will be heard.
In FM1 or FM2 mode, the stations automatically set by the audio
system will be set in the FM3 presets.
Manually
Press and hold until you hear a beep.
appears on the display.
Press several times until “SET” is displayed.
Search for desired stations by pressing “
”or “” on .
Select one of the preset stations (CH1-6) by pressing “ ” or
“ ” on .
Press and hold “ ” or “ ” on for the station the cur-
rent preset is to be set to, until you hear a beep.

264 3-2. Using the audio system
iQ_WE_74014E
EON (Enhanced Other Network) system (for traffic announcement
function)
If the RDS station (with EON data) you are listening to is not broadcasting a
traffic information program and the audio system is in the TA (traffic
announcement) mode, the radio will be switched automatically to a station
broadcasting a traffic information program in the EON AF list when traffic
information begins.
When the battery is disconnected
Station presets are erased.
Reception sensitivity
Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
When AST is used, automatic station selection and automatic registering
of stations may not be possible.
The radio antenna is mounted on the rear roof. The antenna can be
removed from the base by turning it.
NOTICE
To prevent damage, remove the antenna in the following cases
The antenna will touch the ceiling of a garage.
A cover will be put on the roof.

285 3-2. Using the audio system
3
Interior features
iQ_WE_74014E
Selecting a radio station
Press several times until FM or AM mode is displayed.
Press “” or “” on to select a preset station.
To scan for receivable stations, press and hold the switch until you
hear a beep.
Selecting a track/file
Press several times until “CD”, “MP3” or “WMA” is dis-
played.
Press “” or “” on to select the desired track/file.
Selecting a folder
Press several times until “MP3” or “WMA” is displayed.
Press and hold “” or “” on until you hear a beep.
CAUTION
To reduce the risk of an accident
Exercise care when operating the audio switches on the steering wheel.