2012 TOYOTA HILUX reset

177 2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
Speedometer
Displays the vehicle speed.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Odometer/trip meter display change button
P. 178
Odometer and trip meter display
Odometer: Displays the total distance the vehicle has been driven.
Trip meter: Displays the distance the vehicle has been driven since the
meter was last reset. Trip meters A and B can be used to
record and display different distances independently.
Tachometer
Displays the engine speed in revolutions per minute.

178 2-2. Instrument cluster
HILUX_EE (OM0K132E)
Changing the display
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the button will reset the
trip meter.
The units may differ depending
on the target region.
Instrument panel light control (if equipped)
The brightness of the instrument panel lights can be adjusted by turn-
ing the knob.
Darker
Brighter

179 2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
The meters and display illuminate when
The engine switch is in the “ON” position.
The brightness of the instrument panel lights
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully clockwise.
When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
NOTICE
To prevent damage to the engine and its components
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 584)

186 2-2. Instrument cluster
HILUX_EE (OM0K132E)
Switch the display
“INFO.” or “DISP” button
Items displayed can be switched
by pressing the “INFO.” button or
“DISP” button.
The units may differ depending
on the target region.
“RESET” button

187 2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
Display items
Outside temperature display
Average fuel consumption
Current fuel consumption
Average vehicle speedDisplays the outside temperature.
The temperature range that can be displayed is
from -40°C (-40°F) to 50°C (122°F).
Displays the average fuel consumption since the
engine switch is turned to the “ON” position.
• The function can be reset by pressing the
“RESET” button for longer than 1 second when
the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a
reference.
Displays the current rate of fuel consumption.
Displays the average vehicle speed since the
engine switch is turned to the “ON” position.
The function can be reset by pressing the “RESET”
button for longer than 1 second when the average
vehicle speed is displayed.

188 2-2. Instrument cluster
HILUX_EE (OM0K132E)Elapsed time
Driving range
Compass
P. 454
Display off
A blank screen is displayed.Displays the elapsed time after the engine switch
is turned to the “ON” position.
• When the engine switch is turned on, time is
counted from 0:00. When the time exceeds
19:59, the counter returns to 0:00.
• The function can be reset by pressing the
“RESET” button for longer than 1 second when
the elapsed time is displayed.
Displays the estimated maximum distance that
can be driven with the quantity of fuel remaining.
• This distance is computed based on your aver-
age fuel consumption. As a result, the actual dis-
tance that can be driven may differ from that
displayed.
• When only a small amount of fuel is added to the
tank, the display may not be updated.

189 2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
Set up display (if equipped)
Selecting the units
Unit for only the fuel consump-
tion rate can be interchanged.
Switch to the average fuel consumption or current fuel con-
sumption display.
Hold down the “INFO.” button until the unit flashes.
Push the “RESET” button to change the unit.
Push the “INFO.” button.
STEP1
STEP2
STEP3
STEP4

190 2-2. Instrument cluster
HILUX_EE (OM0K132E)
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change:
When the vehicle is stopped, or moving at low speeds (less than 20 km/h
[12 mph])
When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
When “--” is displayed
The system may be malfunctioning. Take your vehicle to any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional.
When disconnecting and reconnecting battery terminals
The following information data and settings will be reset:
Average fuel consumption
Average vehicle speed
Elapsed time