2012 TOYOTA HILUX reset

204 2-4. Using other driving systems
HILUX_EE (OM0K132E)
Cruise control can be set when
The shift lever is in the D or 4 range.
Vehicle speed is above approximately 40 km/h (25 mph).
Accelerating
The vehicle can be accelerated normally. After acceleration, the set speed
resumes.
Automatic cruise control cancelation
Cruise control will stop maintaining the vehicle speed in any of the following
situations:
Actual vehicle speed falls more than approximately 16 km/h (10 mph)
below the preset vehicle speed.
At this time, the memorized set speed is not retained.
Actual vehicle speed is below approximately 40 km/h (25 mph).
VSC is activated. (if equipped)
If the cruise control indicator light turns to yellow (except for Russia
and Ukraine) or flashes (for Russia and Ukraine)
Press the “ON-OFF” button once to deactivate the system, and then press
the button again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels
immediately after being activated, there may be a malfunction in the cruise
control system. Have the vehicle inspected by any authorized Toyota dealer
or repairer, or another duly qualified and equipped professional.

269 3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
Setting station presets
Search for the desired stations by turning the
“TUNE•SCROLL” knob, or pressing “” or “” on the “SEEK/
TRACK” button.
Press and hold the button (from the 1 button to the 6 button)
the station is to be set to until you hear a beep.
Scanning radio stations
Scanning the preset radio stations
Press and hold
the “SCAN” button until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press the “SCAN” button
again.
Scanning all the radio stations within range
Press
the “SCAN” button.
All the stations with reception will be played for 5 seconds each.
When the desired station is reached, press the “SCAN” button
again.
STEP1
STEP2
STEP1
STEP2
STEP1
STEP2

270 3-2. Using the audio system
HILUX_EE (OM0K132E)
When the battery is disconnected
All preset stations are erased.
Reception sensitivity
It is difficult to maintain perfect radio reception at all times due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains and transmitters.
The radio antenna is mounted on the roof. The antenna can be removed
from the base by turning.
Digital Audio Broadcast (DAB) radio
The optional radio antenna and tuner are necessary for the use of Digital
Audio Broadcast (DAB) radio.
NOTICE
To prevent damage, retract the antenna in the following cases
The antenna will touch the ceiling of a garage.
A cover will be put on the roof.
When driving through an automatic car wash.
Any other cases where there is a risk of touching surrounding parts.

293 3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
About iPod
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
iPod is a trade mark of Apple inc., registered in the U.S. and other coun-
tries.
iPod functions
When an iPod is connected and the audio source is changed to iPod
mode, the iPod will resume play from the same point in which it was last
used.
Depending on the iPod that is connected to the system, certain functions
may not be available. Disconnecting the device and reconnecting it once
again may resolve some malfunctions.
While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle’s audio system
instead.
iPod problems
To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner’s Man-
ual.
Display
P. 275
Error messages
“ERROR”: This indicates a problem in the iPod or its connection.
“NO SONGS”: This indicates that there is no music data in the iPod.
“NO PLAYLISTS”: This indicates that some available song are not found in a
selected playlist.
“UPDATE”: This indicates that the version of the iPod is not compati-
ble. Upgrade your iPod software to the latest version.

327
3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
Using the radio
Touch “AM” or “FM” on the audio source selection screen.

Audio control screen
Pressing “MEDIA” displays the audio control screen from any
screens of the selected source.
Audio source selection
screen appears
Displaying the FM station
list
Preset stations
Vo lu m e
Selecting a frequencyDisplaying the source selection
or audio control screen Power
Adjusting
the frequency

328 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
Selecting a station
Seek tuning
Press “” or “” on “SEEK/TRACK”.
Manual tuning
Turn .
Preset stations
Touch desired preset stations (1 to 6).
Using the FM station list
Selecting a station from the FM station list
Touch “Station list”.
To return to the preset screen, touch “Presets”.
Touch desired station selector (1
to 6).
Change the station list using
or .
The FM station list automatically
searches for FM broadcasts by a
band scan to generate a list of
available radio stations.
STEP1
STEP2

329 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
Setting station presets
Search for desired stations by turning or pressing
“” or “” on “SEEK/TRACK”.
Touch and hold one of the preset stations (1 to 6) until you
hear a beep.
RDS (Radio Data System)
Listening to stations of the same network
FM Alternative frequency: The station among those of the same
network with strong reception is
selected.
FM Alternative frequency on/off (P. 322)
Regional code change: The station among those of the same
network with strong reception and
broadcasting the same program is
selected.
Regional code change on/off (P. 322)
STEP1
STEP2

352 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
iPod problems
To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it. For instructions on
how to reset your iPod, refer to your iPod Owner’s Manual.
Error messages
“Connection error.”: This indicates a problem in the iPod or its connection.
“There are no songs available for playback.”:
This indicates that there is no music data in the iPod.
“No items available.”: This indicates that some available songs are not found
in a selected playlist.
“Please check the iPod firmware version.”:
This indicates that the software version is not compati-
ble.
Please check the compatible models. (P. 353)
“iPod authorization failed.”:
This indicates that it failed to authorize the iPod.
Please check your iPod.