2012 SSANGYONG NEW REXTON sensor

Font Side
7910-01 Radiator Grille
- Changed the mounting type
(from on hood to on bumper).
- Changed the radiator grill design.
8310-01 Head Lamp
- Changed the head lamp design and functions.
- Turn signal lamp integrated with front fog lamp
1. EXTERIOR
7871-01 Front Bumper and Front PAS Sensor
- Changed the front bumper design according to the design changes of front combination lamp
and radiator grille.
- Changed the location of front PAS sensor.
Head lamp -
Low beam
Turn signal/Position lamp
Head lamp -
High beam Head lamp -
High beamHead lamp - Low beam
Position lamp (LED)
Front fog lamp
Front PAS sensorTurn signal/Front fog lamp
Front PAS sensor

7881-01 Rear Bumper and Rear PAS Sensor
- Changed the rear bumper design.
Rear PAS sensorRear PAS sensor
Rear Side
7950-39 Quarter Badge
- Installed the brand logo on LH rear quarter
panel (Rexton W).
8912-26 Audio Antenna
- Changed the antenna type from shark type to pole
type.

0000-00
8790-03 PAS Sensor
- Changed the locking type from spring type to holder type.
8790-01 PAS Unit
- Changed the PAS sensor operating voltage
center).

0000-00
Knock sensor (one) and
water temperature sensor
Fuel rail sensor (common
rail)
1. LOCATION OF MAJOR SENSORS ON ENGINE
Major sensors and devices
InjectorGlow plugCommon rail
Camshaft position sensorBoost pressure sensor
Crankshaft position
sensor
HP pumpCommon rail
Injector
Turbocharger vacuum
modulator

2. ENGINE ACCESSORIES RELATED TO ECU
HFM sensor (HFM 6.0)
To control the engine more precisely, new
functions such as digital signal for intake air mass
have been introduced.
Engine ECU
Location

0000-00
Accelerator pedal moduleFuse
Relay
Engine main relay 4
PPS (integrated
two pedal position
sensors)
Pre-glow and immobilizer
Engine main relay 4
IMV
Priming pumpFuel filter

0000-00
Turbocharger intercooler
4. LAYOUT OF INTAKE SYSTEM
HFM sensor (HFM 6.0)
Turbocharger
Supplying the compressed air by turbocharger
Air cleaner
Turbocharger
Turbocharger
Plug in sensor
Air
cleanerTurbochargerProtension graph
Temperature
sensor
Air cleaner
Intake manifold
Coolant port To respective cylinder
From
intercoolerVGT control
actuator
Exhaust gas
Throttle body
Engine operating: Flap
openEngine stopped:
Flap closed
Intake duct
Intake duct
Boost pressure
sensor
Power
Voltage outputGround

InjectorFuel filter and priming pump
8. LAYOUT OF FUEL SYSTEM
Components
IMV connector
Pressure sensor
in fuel rail
High pressure
fuel pipe
Fuel pipe
Common rail IMV connector
HP pump
Priming pumpFuel filter
Connector
Returned fuel
from HP pumpFuel filter
Fuel tank
HP pump
Fuel tank
Fuel return port
Low pressure fuel supply portVenturi
Fuel return portFuel temperature
sensor
IMV valve
IMV connectorHigh pressure fuel
supply port
(with orifice)