02-218710-01
▶Volume Sensitive INT (Intermittent) Wiper
For RKSTICS without the rain sensor, perform the following operation:
Controls the wiper intermittent operation by the values from the vehicle speed and the
volume (resistance). -
Calculates and converts the Intermittent interval automatically by obtaining the IN
T
VOLUME when the ignition switch and the INT switch is in the "ON" position.
The wipers are operated in vehicle speed sensitive mode when turning the INT switch to
the "ON" position with the engine running or starting the engine with the INT switch
positioned to "ON".
Intermittent interval (at 0 km/h): 3 ± 0.5 ~ 19 ± 2 seconds ˙
˙
˙
Vehicle speed calculation -
[Input the vehicle speed]
It is calculated by the numbers of input pulses for one second.
VOLUME calculation -
The pause time of the vehicle speed sensitive INT wiper is calculated by the INT volume
(input voltage). Each level has the hysteresis. ˙
Pause time calculation -
Pause time means the duration that wipers are stopped at parking position.
Elapsed time means the duration after the wiper motor started to operate from parking
position.
The pause time is calculated by the vehicle speed and the VOLUME.
※If the pause time is below 1.0 second, the wipers operate without pause.
※If the pause time is over 1.5 seconds, the wipers operate intermittently. ˙
˙
˙60 [km/h] × 60 [sec]
1 [PULSE/SEC] =
637 × 4 PULSE≒ 1.41 [km/h]
08-10
7) Speed Sensitive INT Wiper
Calculates and converts the Intermittent interval automatically by obtaining the INT VOLUME
when the ignition switch and the INT switch is in the "ON" position.
The wipers are operated in vehicle speed sensitive mode as soon as turning the INT auto
switch to the "ON" position with the ignition key ON or turning the ignition key to the "ON"
position with the INT auto switch ON.
This applies to the vehicle without the rain sensor. -
-
※
Controls the wiper intermittent operation by the values from the vehicle speed and the setting
value.
