02-58810-01
3. GENERAL WARNINGS
Do not diagnose the circuit with a circuit tester or attempt to modify any air bag components
including the steering wheel, air bag mounting area and harness.
Incorrect inspection could cause a problem with an air bag and seat belt pretensioner, and
they cannot protect occupants properly. Inspection and repair service should be done only by
a qualified technician.
An infant or a child should not be seated on the front seat alone or on an adult's lap. An infant
or a child could be severely injured by air bag deployed.
A child restraint system should be placed on the rear seat which has the 3-point type seat belt.
Never install a child restraint system on the front seat. Impact by the air bag inflation might
cause severe injury or even death.
When an occupant fastens the seat belt with unstable or inclined posture, the air bag cannot
protect the occupant properly. Moreover, the occupant may be injured by the air bag.
Do not incline toward the steering wheel while driving. If you hit the air bag before it is fully
inflated, brain or neck injury, or even death can occur.
Be careful not to strike the steering wheel, air bag mounting area, any air bag related
component (including wiring) and seat belt pretensioner. You might get severely injured by
sudden deployment of the air bag.
The air bag contains explosive materials, so handle it carefully when disposing or replacing it.
The air bag components will be very hot immediately after deployment. Do not touch them until
they cool down.
Once the air bag/seat belt pretentioner is triggered, it will not deploy again even if an additional
impact is applied to it. Once triggered air bag/seat belt pretensioner related components
cannot be reused, so they should be removed from the vehicle and the whole system should
be replaced with a new one.
Do not place any object or sticker on the air bag mounting area for correct and safe activation
of the air bag.
Do not bang the door. Otherwise, an air bag might operate erroneously.
Hold the outer rim of the steering so that the air bag can inflate without any hindrance.
Do not incline toward the steering wheel or hold the steering wheel with your hands crossed. It
will cause a problem with the air bag activation or severe injury when the air bag inflates.
Never put your hands or feet on the dash board. You can severely injured when the air bag
inflates.
It is normal that a loud noise, dust and smoke occur when the air bag and seat belt
pretensioner operate.
The gas come out of air bag/seat belt pretensioner activation is non-toxic nitrogen gas.
However, if this gas occurs irritation to your skin, eyes, nose, and so on, wash it out with clean
water. Seek medical help if symptoms develop. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
OVERVIEW ANS OPERATING
PROCESS
1. FRONT SEAT.........................................
COMPONENT
7410-01 FRONT SEAT...............................
7410-01 COMPOSITION OF
FRONT SEAT...............................
7510-01 REAR SEAT.................................
7510-01 COMPOSITION OF REAR SEAT..
7430-00 FRONT SEAT BELT.....................
7530-00 REAR SEAT BELT.......................
7430-01 LAYOUT OF SEAT BELTS..........
7510-08 CHILD RESTRAINT SYSTEM
(ISOFIX).......................................
REMOVAL AND INSTALLATION
7410-01 DRIVER SEAT ASSEMBLY..........
7410-01 PASSENGER SEAT ASSEMBLY.
7510-01 RAER SEAT ASSEMBLY.............
7430-01 FRONT SEAT BELT.....................
7530-01 REAR SEAT BELT (3-POINT)......
7530-04 REAR SEAT BELT (2-POINT)......
4
6
8
9
10
11
12
1619
21
23
25
27
29 2
03-16
1) Types of Child Restraint System
There are 2 securing types for the child restraint system.
By using seat belt
By using ISOFIX (for the vehicle with ISOFIX system) -
-
2) Securing the Child Restraint Seat (Normal Baby Seat)
Item Weight AgeFixing
methodRear
left/right seat
Driver seat/rear
center seat
Reversed seat< 10kg 6 to 9 months Seat belt U/SU X
< 13kg 12 to 15 months Seat belt U/SU X
Forward seat
9 to 18kg 9 to 48 monthsSeatbelt/
ISOFIXU/UF/SU X
Booster seat 15 to 25 kg 4 to 6 years Seat belt U X
Booster
cushion22 to 36 kg 6 to 11 years Seat belt U X
U: General child restraint system which should be fixed with the seat belt approved by official
institute.
UF/ SU: General child restraint system which should be fixed with the ISOFIX approved by
official/semiofficial institute.
X: Seat which is not allowed to use child restraint system. -
-
-
03-177510-08
3) Securing a Child Seat with “ISOFIX” System
How to use the ISOFIXLower Latch Anchor ▶
The ISOFIX lower latch anchors are located
in the left and right outboard rear seating
positions. Their locations (1) are shown in
the illustration.
Insert the child restraint attachments into
the ISOFIX lower latch anchors until it
clicks.
Do not use the seat belt for installing the
ISOFIX child restraint.
There is no ISOFIX lower latch anchor
provided for the center rear seating
position. -
-
-
-
(3) ISOFIX child
restrain
(1) ISOFIX mark (2) Latch anchor
When using the “ISOFIX” lower latch
system, all unused vehicle rear seat belt
metal latch plates or tabs must be
latched securely in their seat belt buckles
and the seat belt webbing must be
retracted behind the child restraint to
prevent the child from reaching and
taking hold of unretracted seat belts.
Unlatched metal latch plates or tabs may
allow the child to reach the unretracted
seat belts which may result in
strangulation and a serious injury or
death to the child in the child restraint.
Child restraint anchorages are designed
to withstand only those loads imposed
by correctly fitted child restraints. Under
no circumstances are they to be used for
adult seat belts or harnesses or for
attaching other items or equipment to the
vehicle. -
-
03-18
How to use the Rear Anchor ▶
Two rear anchors are located on the rear
wall.
Connect the tether connector in child
restraint to the rear anchor.
Securely tighten the child restraint by
adjusting the webbing of the tether
connector. -
-
-
Child restraint anchorages are designed to withstand only those loads imposed by correctly
fitted child restraints.
Make sure to use the lower latch anchors and rear anchor together when installing the ISOFIX
child restraint.
Insert the child restraint attachments into the ISOFIX lower latch anchors until it clicks.
The tether strap may not work properly if attached somewhere other than the correct rear
tether anchor.
If the child restraint is not anchored properly, the risk of a child being seriously injured or
killed in a collision greatly increases.
When using the ISOFIX lower latch anchors, make sure that no interference are around the
bar and the seat belt is not stuck.
Rock the child restraint to check if it is securely installed. Refer to instructions provided by
the manufacturer of the child restraint.
Do not install the child restraint if it hinders the operations of front seat. -
-
-
-
-
-
-
-
