07-2
1. LAMP SPECIFICATIONS
1) Exterior Lamps
Item Type Amount
Front lampHeadlamp (high beam/low beam) BULB: H4 2 EA
Turn signal lamp BULB: PY21W 2 EA
Position lamp BULB: W5W 2 EA
Fog lamp BULB: H27W/2 2 EA
Rear lamp
Stop lamp and tail lampBULB: 12V27/8W (Korea)
P21/5W (Other countries)2 EA
Turn signal lampBULB: 12V27W (Korea)
P21W (Other countries)2 EA
Backup lampBULB: 12V27W (Korea)
P21W (Other countries)2 EA
Stop lamp/Rear fog lamp
(Other countries)BULB: 12V27W (Korea)
P21W (Other countries)2 EA
High-mounted stop lamp LED
(Without spoiler)
(With spoiler)12 EA
24 EA
License plate lamp BULB: W5W 2 EA
Side lampSide repeater lamp LED 5 EA
Puddle lamp LED 2 EA
2) Interior Lamps
Item Type Amount
Front room lampBULB (10W-FESTOON) 2 EA
Center room lampBULB (10W-FESTOON) 1 EA
Luggage lampBULB (10W-FESTOON) 1 EA
Sun visor lampBULB (5W-FESTOON) 1 EA
Glove box lampBULB (5W-FESTOON) 1 EA
Door courtesy lampBULB (5W-WEDGGE) 1 EA
Item Type Amount
Front lampHeadlamp (high beam/low beam) BULB: H4 2 EA
Turn signal lamp BULB: PY21W 2 EA
Position lamp BULB: W5W 2 EA
Fog lamp FRT BULB: H27W/2 2 EA
RR BULB: H21W/2 2 EA
07-38310-00
Luminous intensity is a measure for the amount of light which passes through the unit area per
time unit. The SI unit of luminous intensity is the candela (cd), an SI base unit. -Luminous Intensity ▶
Luminance describes the amount of light that passes through or is emitted from a particular area,
and falls within a given solid angle. It is measured in sb or nt. -Luminance ▶
This indicates the amount of light reaching a given area. Measuring unit is lux (lx) and it is not
directly proportional to the brightness of the area as the reflection rate is not included. -Intensity of illumination ▶The LED stands for "Light Emitting Diode" or "Luminescent Diode." LED is a semiconductor diode
that emits incoherent narrow-spectrum light when electrically biased in the forward direction of the
p-n junction, as in the common LED circuit. In short, it is an element that converts electric signals
into light signals. Yellow, blue, red and white LEDs are currently available.
The followings are the advantages of LED.
It is not glaring and doesn't have short circuit unlike the conventional lamps.
It is semi-permanent and doesn't generate heat.
Its power consumption is much lower than those of conventional bulbs. -
- ▶ LED
Pin No. Specification
Operating voltage 9 V to 16 V
Load Max. 200 mA (relay load)
Operating temperature-30℃ to 85℃
Storage temperature-40℃ to ±120℃
Mounting location Top center of inner side of windshield glass
2. AUTOMATIC LIGHT SENSOR SPECIFICATIONS
