2012 Seat Toledo service

5Introduction to the Bluetooth systemWARNING●Please concentrate on driving. As the driver, you have the responsibil-ity for your safety and that of others. For this reason, you should only usethe functions when the traffic situation allows so and in a manner thatallows you to maintain control of the vehicle. Otherwise, you run the riskof causing an accident.
●
The speech system must not be used in cases of emergency, since thevoice changes in stressful situations. This could result in a failed or de-layed telephone connection. Always dial emergency numbers manually!
●
Always observe applicable legislation.
●
Adjust the volume so that external warning sounds (e.g. emergencyvehicles) are always audible.
Note
●The voice control system is only available in the following languages:Spanish, Mexican Spanish, German, English, French, Canadian French, Ital-ian, Portuguese, Czech, Russian and Dutch. For other languages, the prede-fined language for the voice instructions is English. Please take the vehicleto a Technical Service if you wish to change the language.
●
There may be restrictions on the use of Bluetooth devices in some coun-tries. Information is available from the local authorities.
●
If you connect the mobile phone Bluetooth system to a Bluetooth de-vice, consult the safety warnings in its instruction manual. Use compatibleBluetooth products only.


11OperationOther commands for operating the Bluetooth systemCommandActionCALL[NAME]a)This command is used to call a contact in the phone book.PHONEBOOKAfter this command you can play all the contacts, select oneto call or record/delete the name by voice.CALL LISTThe Received calls, Missed calls or Dialled numbers list isread.DIAL NUM-BERAfter this command you can enter a phone number to callthe desired person ⇒ page 11.REDIALAfter this command the system dials the last number.
OTHER OP-TIONS
PHONE BOOKPLAY ALL (Selectcontact)
CALL contactRECORD contact nameby voiceb)DELETE contact nameby voiceSETTINGS
UPDATE phone bookLONG DIALOGUE / SHORT DIALOGUERESTORE FACTORY DEFAULTSc)
CALL HISTORY
RECEIVED callsMISSED callsDIALLED numbersa)
Depending on the configuration of the system of the country, this command can be inver-ted: [SURNAME NAME].
b)
Because of the different pronunciations of each language, some of the names may not beread as you expected. Because of this you can record up to 15 contacts with your ownvoice.
c)
It is advised to restore the default settings upon selling your vehicle in order to delete per-sonal details such as PIN, contacts, calls..., and restore settings.
DIAL NUMBER command
After saying the DIAL NUMBER command the system asks you to enter a tel-ephone number. The telephone number can be entered as a sequence of
digits pronounced coherently (complete number), in series of digits (sepa-rated by a brief pause) or in digits pronounced separately. After each seriesof digits (separated by a brief pause) the digits recognised until then are re-peated.
Digits 0 - 9 and symbols +, , # are allowed. The system does not recog-nise coherent numeric combinations such as twenty-three, only individualdigits (two, three).

Additional information
Voice control is available in different languages:
Spanish, Mexican Spanish, German, English, US English, French, CanadianFrench, Italian, Portuguese, Czech, Russian and Dutch.
The language is configured at the dealer and can only be changed at a SEATOfficial Service.
The languages available in each vehicle depend on the destination of thevehicle.
Dialogue options
The voice control system includes the options, short dialogue and long dia-logue. The default setting is the long dialogue. The short dialogue is recom-mended when you are familiar with the orders and the structure of the voicecontrol menu. The long dialogue offers more tips and information about thevoice control procedure. It can be changed via voice control ⇒ page 10.
