2012 RENAULT TWINGO alternator

feux :indicateurs de direction ................................. (page courante)
JauneNoirNoir texte
5.15
ENG_UD26876_6
Projecteurs avant avec lampes halogènes : remplacement des lampes (X\
44 - Renault)
ENG_NU_952-4_X44_Renault_5
Direction indicator lights
changing a bulb
– unclip cover 3 and remove it;
– turn bulb holder 4 anticlockwise;
– change the bulb 5.
Bulb type: PY21W.
FrOnt HeADLIgHtS: changing bulbs (2/2)
The bulbs are under pres -
sure and can break when
replaced.
Risk of injury.
Any operation on (or modi -
fication to) the electrical
system must be performed
by an approved dealer
since incorrect connections could
damage the electrical equipment
(wiring, components, in particu -
lar the alternator). In addition, your
dealer has available all the parts
necessary for fitting electrical com -
ponents.
3
To return it, proceed in the reverse
order to removal.
When the bulb has been changed,
make sure you refit the cover 3 cor -
rectly.
4
5

lights:fog lights ......................................... (up to the end of the DU)
bulbs changing ......................................... (up to the end of the DU)
lights: side lights ........................................ (up to the end of the DU)
changing a bulb .................................... (up to the end of the DU)
5.16
ENG_UD26880_1
Feux de brouillard, feux de position avant: remplacement des lampes (X4\
4 - Renault)
ENG_NU_952-4_X44_Renault_5
Fog lights, front side lights
Front fog lights 1 and front
side lights 2Turn light trim 3 anticlockwise and
remove it.
Unscrew the two screws 4 (using a flat-
blade screwdriver or similar) as shown.Release the light 5.
Turn one of the bulb holders 7 anti -
clockwise and change the bulbs 6 or 8.
To reassemble, proceed in the reverse
order to removal.
Make sure the two screws are tight -
ened and replace the light trim.
Front fog lights 1
Bulb type: H11 or H11 LL.
Front side lights 2
Bulb type: W5W or W5W LL .
FOg LIgHtS, FrOnt SIDe LIgHtS: changing bulbs
Any operation on (or modi-
fication to) the electrical
system must be performed
by an approved Dealer
since an incorrect connection might
damage the electrical equipment
(harness, components and in partic-
ular the alternator). In addition, your
Dealer has all the parts required for
fitting these units.
The bulbs are under pres -
sure and can break when
replaced.
Risk of injury.
1
23
47
8
5
6