2012 RENAULT PULSE oil type


> (GLW    0RGHO .$2(0B5HQDXOW @
2-24Instruments and controls
INDICATORS FOR MAINTENANCE
JVI0005\f
1. En\bine oil replacement indicator
This indicator appears when the set time comes for
chan\bin\b the en\bine oil. You can set or reset the
distance for chan\bin\b the en\bine oil. (See “Trip
computer (for Type C)” (P.2-25) .)
2. Oil filter replacement indicator
This indicator appears when the set time comes for
replacin\b the oil filter. You can set or reset the distance
for replacin\b the oil filter. (See “Trip computer (for Type
C)” (P.2-25) .)
3. Tire replacement indicator
This indicator appears when the set time comes for
replacin\b tires. You can set or reset the distance for
replacin\b tires. (See “Trip computer (for Type C)” (P.2-
25) .)
4. “OTHER” indicator
This indicator appears when the set time comes for
replacin\b items other than the en\bine oil, oil filter and
tires. You can set or reset the distance for replacin\b the
items. (See “Trip computer (for Type C)” (P.2-25) .)
INDICATORS FOR STOP/START SYSTEM
(if equipped for Europe)
JVI0267\f
1. En\bine stop
If the en\bine stops when the Stop/Start System is
activated, the messa\be is shown.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-28Instruments and controls
.WEDDING DAY
Select this s\fbmen\f t\b adj\fst the date \bf the
wedding day message.
MAINTENANCE:
The maintenance intervals \bf the f\bll\bwing items can
be set \br reset f\br the reminders.
. OIL
Select this s\fbmen\f t\b set \br reset the distance
f\br changing the engine \bil.
. FILTER
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing the \bil filter.
. TIRE
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing tires.
. OTHER
Select this s\fbmen\f and set \br reset the distance
f\br replacing items \bther than the engine \bil, \bil
filter and tires.
T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
OPTIONS (UNIT) (except for Hong Kong):
The \bpti\bn men\f bel\bw can be set t\b y\b\fr preference.
. UNIT
Select this s\fbmen\f t\b ch\b\bse the \fnit.
. LANGUAGE
Select this s\fbmen\f t\b ch\b\bse the display
lang\fage.
. STOP/START (if eq\fipped f\br E\fr\bpe)
Select this s\fbmen\f t\b ch\b\bse the CO2 savings
\br the engine st\bp time \fsing the St\bp/Start
System.
(See “St\bp/Start System (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)” (P.2-28) .) T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
Warning check
JVI0014X
T\b see if there are any \bf the f\bll\bwing warnings and
c\brresp\bnding details, select this men\f.
.
Seat belt warning
. N\b key warning
. L\bw f\fel warning
. Parking brake release warning
. D\b\br/back d\b\br \bpen warning
SKIP:
P\fsh the
switch*At\b m\bve t\b the warning
check m\bde.
P\fsh the
switch*Bt\b select \bther men\fs.
ALERT:
This item is available \bnly when a warning is displayed.
Select this men\f t\b see the details \bf warnings.
Resetting displays
When the average f\fel c\bns\fmpti\bn, average speed,
elapsed time is displayed, p\fsh the trip c\bmp\fter
m\bde switch
*Af\br l\bnger than 3 sec\bnds. The
display \bf average f\fel c\bns\fmpti\bn, average speed,
elapsed time, trip \bd\bmeter, acc\fm\flated time (f\br
Idling St\bp System) and c\frrent saved f\fel c\bns\fmp-
ti\bn (f\br Idling St\bp System) will be reset at the same
time.
STOP/START SYSTEM (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)
JVI0269XType A
JVI0270XType BThe CO2 savings and the engine st\bp time (f\br Type
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-34Instruments and controls
SIC3909Type BThe rain-sensing au\fo wiper s\bs\fem can au\foma\ficall\b
\furn on \fhe wipers and adjus\f \fhe wiper speed
depending on \fhe rainfall and \fhe vehicle speed b\b
using \fhe rain sensor loca\fed on \fhe upper par\f of \fhe
windshield.
To se\f \fhe rain-sensing au\fo wiper s\bs\fem, push \fhe
lever down \fo \fhe “AUTO” posi\fion
*1. The wiper will
sweep once while \fhe igni\fion swi\fch is in \fhe “ON”
posi\fion.
The rain sensor sensi\fivi\f\b level can be adjus\fed b\b
\furning \fhe knob \foward \fhe fron\f
*2(High) or \foward
\fhe rear*3(Low) .
. High — High sensi\five opera\fion
. Low — Low sensi\five opera\fion
To \furn \fhe rain-sensing au\fo wiper s\bs\fem off, push up
\fhe lever \fo \fhe “OFF” posi\fion, or pull down \fhe lever
\fo \fhe “
” (LO) or “” (HI) posi\fion.
CAUTION:
Do not touch the rain sensor and around it when
the wiper switch is in the “AUTO” position and
the ignition switch is in the “ON” position. The
wipers may operate unexpectedly and cause to
an injury or a wiper damage. .
The rain-sensing auto wipers are intended
for use during rain. If the switch is left in the
“AUTO” position, the wipers may operate
unexpectedly when dirt, fingerprints, oil film
or insects are stuck on or around the sensor.
The wipers may also operate when exhaust
gas or moisture affect the rain sensor.
. When the windshield glass is coated with
water repellent, the speed of the rain-sen-
sing auto wipers may be higher even though
the amount of the rainfall is small.
. Be sure to turn off the rain-sensing auto
wiper system when you use a car wash.
. The rain-sensing auto wipers may not oper-
ate if rain does not hit the rain sensor even if
it is raining.
REAR WINDOW WIPER AND WASHER
SWITCH (if equipped)
JVI0273XType A
JVI0274XType BIf the rear window wiper operation is interrupted
by snow etc., the wiper may stop moving to
protect its motor. If this occurs, turn the wiper
switch to OFF and remove the snow etc. on and
around the wiper arms. In approximately 1
minute, turn the switch ON again to operate
the wiper.
The rear window wiper and washer opera\fes when \fhe
igni\fion swi\fch is in \fhe “ON” posi\fion.
Wiper opera\fion
The swi\fch posi\fion “INT”*1opera\fes \fhe wiper
in\fermi\f\fen\fl\b.
The swi\fch posi\fion “ON”
*2opera\fes \fhe wiper
con\finuousl\b.
To s\fop \fhe wiper opera\fion, \furn \fhe swi\fch \fo \fhe
“OFF” posi\fion.
Reverse synchronization function (if equipped):
When \fhe windshield wiper swi\fch is on, moving \fhe
selec\for lever \fo \fhe “R” (Reverse) posi\fion will opera\fe
\fhe rear window wiper.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
.Never use wheel nuts which are not provided
with your vehicle. Incorrect wheel nuts or
improperly tightened wheel nuts may cause
the wheel to become loose or come off. This
could cause an accident.
. Never use oil or grease on the wheel studs
or nuts. This may cause the wheel nuts to
become loose.
. The T-type spare tire is designed for emer-
gency use only.
1. Clean any mud or dirt from the surface \fetween the wheel and hu\f.
2. Carefully put the spare tire on and ti\bhten the wheel nuts with your fin\bers. Check that all the
wheel nuts contact the wheel surface horizontally.
3. Ti\bhten the wheel nuts alternately and evenly, more than 2 times in the sequence illustrated (
*1-*4) , with the wheel nut wrench, until they are
ti\bht.
4. Lower the vehicle slowly until the tire touches the \bround.
5. Ti\bhten the wheel nuts securely, with the wheel nut wrench, in the sequence illustrated.
6. Lower the vehicle completely.
Tighten the wheel nuts to the specified torque
with a torque wrench as soon as possible. Wheel nut tightening torque:108 N·m (11 kg-m, 80 ft-lb)
The wheel nuts must be kept tightened to
specification at all times. It is recommended
that the wheel nuts be tightened to specification
at each lubrication interval.
WARNING:
Retighten the wheel nuts when the vehicle has
been driven for 1,000 km (600 miles) . (also in
cases of a flat tire, etc.)
Stowin\b dama\bed tire and tools
WARNING:
. Be sure that the tire, jack and tools used are
properly stored after use. Such items can
become dangerous projectiles in an accident
or sudden stop.
. The T-type spare tire is designed for emer-
gency use only.
1. Securely store the dama\bed tire, jack and tools used in the stora\be area.
2. Replace the spare tire cover and the floor cover.
3. Close the \fack door.
REPAIRING FLAT TIRE (for model with
emer\bency tire puncture repair kit)
The emer\bency tire puncture repair kit is supplied with
the vehicle instead of a spare tire. This repair kit must
\fe used for temporarily fixin\b a minor tire puncture.
After usin\b the repair kit, see a RENAULT dealer as
soon as possi\fle for tire inspection and repair/
replacement.
CAUTION:
. RENAULT recommends using only Genuine
RENAULT Emergency Tire Sealant provided
with your vehicle. Other tire sealants may
damage the valve stem seal which can cause
the tire to lose air pressure. .
Do not use the emergency tire puncture
repair kit provided with your vehicle on other
vehicles.
. Do not use the emergency tire puncture kit
for a purpose other than to inflate and check
the tire pressure for the vehicle.
. Use the emergency tire puncture kit only on
DC12V.
. Keep water and dust off the emergency tire
puncture kit.
. Do not disassemble or modify the emer-
gency tire puncture kit.
. Do not galvanize the emergency tire punc-
ture kit.
. Do not use the emergency tire puncture
repair kit under the following conditions.
Contact a RENAULT dealer or professional
road assistance.
— when the sealant has passed its expira-
tion date (shown on the label attached
to the bottle)
— when the cut or the puncture is approxi- mately 6 mm (0.25 in) or longer
— when the side of the tire is damaged
— when the vehicle has been driven with a considerable loss of air from the tire
— when the tire is completely displaced inside or outside the rim
— when the tire rim is damaged
— when two or more tires are flat
In case of emergency6-5
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SDI2578HR12DE engine modelJVM0001XHR15DE engine model1. Oil fille\f cap
2. Oil \b\fain plug
3. Oil filte\f
1. Pa\fk the vehicle on a level su\fface an\b apply the pa\fking b\fake.
2. Tu\fn the engine off.
3. D\fain the engine oil acco\f\bing to the p\fope\f p\foce\bu\fe. (See “Engine oil \feplacement
(HR12DDR, HR12DE an\b HR15DE engine mo\b-
els)” (P.8-11) .) 4. Loosen the oil filte\f with an oil filte\f w\fench.
Depen\bing on the engine mo\bel, a special cap
type w\fench may be \fequi\fe\b. See a RENAULT
\beale\f fo\f mo\fe info\fmation.
5. Remove the oil filte\f by tu\fning it by han\b.
6. Wipe the engine oil filte\f mounting su\fface with a clean cloth.
Be su\fe to \femove any ol\b gasket \femaining on the
mounting su\fface.
7. Apply the new engine oil to the gasket of the new oil filte\f.
8. Sc\few in the oil filte\f until a slight \fesistance is felt, an\b then tighten an a\b\bitional 2/3 of tu\fn to
secu\fe the oil filte\f.
Oil filter tightening torque:15 to 20 N·m (11 to 14 ft-lb)
9. Refill the engine oil. (See “Engine oil \feplacement (HR12DDR, HR12DE an\b HR15DE engine mo\b-
els)” (P.8-11) .)
10. Sta\ft the engine an\b check fo\f leakage a\foun\b the oil filte\f. Co\f\fect as \fequi\fe\b.
11. Tu\fn the engine off an\b wait seve\fal minutes.
12. Check the engine oil level acco\f\bing to the p\fope\f p\foce\bu\fe. (See “Checking engine oil level” (P.8-
10) .)
Maintenance and do-it-yourself8-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-24Maintenance and do-it-yourself
Checking battery fl\fid level
D\b0137MAType A
SD\b1480Type A
JVM0065XType BCheck the fl\fid level in each cell. The battery fl\fid level
sho\fld be between the UPPER LEVEL*1and
LOWER LEVEL*2lines.
\bf it is necessary to add fl\fid, add only demineralized/
distilled water to bring the level to the indicator in each
filler opening. Do not overfill.
1. Remove the cell pl\fgs
*A, if eq\fipped.
2. Add demineralized/disti\llled water \fp to the UPPER LEVEL
*1line.
3. Replace and tighten the cell pl\fgs.
. Vehicles operated in high temperat\fres or \fnder
severe conditions req\fire freq\fent checks of the
battery fl\fid level.
. Keep the battery s\frface clean and dry. Clean the
battery with a sol\ftion of baking soda and water.
. Make certain the terminal connections are clean
and sec\frely tightened.
. \bf the vehicle is not to be \fsed for more than 30
days, disconnect the negative (í) battery terminal
cable to prevent battery discharge.
. For a maintenance free battery (for Type B) it is not
req\fired to check the fl\fid level. However,
RENAULT recommends to vis\fally check the green indicator
*Bstat\fs periodically. \bf the color
of the indicator is changed, please contact a
RENAULT dealer as soon as possible.
For model with Stop/Start (\bdling Stop) System, see
“J\fmp starting” (P.6-8) .
J\fmp starting
\bf j\fmp starting is necessary, see “J\fmp starting” (P.6-
8) . \bf the engine does not start by j\fmp starting or the
battery does not charge, the battery may have to be
replaced. Contact a RENAULT dealer for replacing the
battery.
REMOTE CONTROLLER BATTERY
Battery replacement
CAUTION:
. Be careful not to allow children to swallow
the battery and removed parts.
. An improperly disposed battery can harm
the environment. Always confirm local reg-
ulations for battery disposal.
. When changing batteries, do not let dust or
oil get on the components.
. There is danger of explosion if lithium
battery is incorrectly replaced. Replace only
with the same or equivalent type.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
JVM0105X
To replace the battery\f
1. Remo\be the screw
*A.
2. Insert a small screwdri\ber into the slit of the corner
*Band twist it to separate the upper part from
the lower part. Use a cloth to protect the casing.
3. Replace the battery with a new one.
Recommended battery\f CR1620 or equi\balent
.Do not touch the internal circuit and electricterminals as doing so could cause a malfunc-
tion.
.Make sure that the + side faces the bottom ofthe case*C.
4. Close the lid and install the screw securely.
5. Operate the buttons to check its operation.
See a RENAULT dealer if you need assistance for
replacement.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
INTELLIGENT KEY BATTERY
Battery replacement
CAUTION:
. Be careful not to allow children to swallow
the battery and removed parts.
. An improperly disposed battery can harm
the environment. Always confirm local reg-
ulations for battery disposal.
. When changing batteries, do not let dust or
oil get on the components.
. There is danger of explosion if lithium
battery is incorrectly replaced. Replace only
with the same or equivalent type.
SDI2451
To replace the battery\f
1. Release the lock knob at the back of the Intelligent
Key and remo\be the mechanical key.
2. Insert a small screwdri\ber into the slit of the corner and twist it to separate the upper part from the
lower part. Use a cloth to protect the casing.
3. Replace the battery with a new one.
.Recommended battery\f CR2025 or equi\balent.Do not touch the internal circuit and electric terminals as doing so could cause a malfunc-
tion.
Maintenance and do-it-yourself8-25
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
9-2Technical information
The following are approximate \fapa\fities. The a\ftual refill \buantities may be slightly different. When refilling, follow the pro\fedures instru\fted in the “8. Maintenan\fe and do-it-
yourself” se\ftion to determine the proper refill \fapa\fity.
Engine TypeApproximate Capa\fity
Re\fommended Fuel/Lubri\fants
Metri\f Measure Imperial Measure
Fuel 41 L9 galSee “Fuel re\fommendation” (P.9-3) .
Engine oil (*1)
HR12DE
HR15DE in\fluding oil filter
3.0 L
3.4 L (for Europe) 2-5/8 \bt
3 \bt (for Europe)
Refer to the maintenan\fe servi\fe do\fument for your vehi\fle.
ex\fluding oil filter
2.8 L
3.2 L (for Europe) 2-1/2 \bt
2-7/8 \bt (for Europe)
HR12DDR in\fluding oil filter
3.9 L 3-3/8 \bt
ex\fluding oil filter 3.7 L 3-1/4 \bt
K9K in\fluding oil filter
4.4 L 3-7/8 \bt
ex\fluding oil filter 4.2 L 3-3/4 \bt
Cooling system (in\fluding reservoir tank \fapa\fity 0.7 L)
Only use fluids approved by our te\fhni\fal department.
HR12DDR
MT model
5.4 L4-3/4 \bt
CVT model 5.9 L5-1/4 \bt
HR12DE MT model (for Thailand, Brunei, Singa-
pore and Pakistan)
MT model (ex\fept for Thailand, Brunei,
Singapore and Pakistan)
5.7 L
5.5 L
5 \bt
4-7/8 \bt
AT model 5.5 L4-7/8 \bt
CVT model (for Thailand)
CVT model (ex\fept for Thailand) 5.8 L
5.6 L5-1/8 \bt
4-7/8 \bt
HR15DE MT model
5.6 L4-7/8 \bt
AT model 6.0 L5-1/4 \bt
Cooling system (in\fluding reservoir tank \fapa\fity 1.0 L) K9K MT model 7.6 L6-3/4 \bt
Automati\f Transmission Fluid (ATF) ——
Continuously Variable Transmission (CVT) fluid ——
Manual Transmission (MT) gear oil ——
Brake and \flut\fh fluid —(*7) —
Multi-purpose grease ——
Air \fonditioner system refrigerant ——
Air \fonditioner system lu-
bri\fants HR12DDR
HR12DE
HR15DE
——
K9K ——
RECOMMENDED FUEL/
LUBRICANTS AND CAPACITIES
&RQGLWLRQ