2012 RENAULT PULSE alarm


> (GLW    0RGHO .$2(0B5HQDXOW @
JVP0086XType B1 Anti-Theft Sy\ftem key
2 Anti-Theft Sy\ftem key \bMolded)
3 Key number plate
JVP0087XType C1 Anti-Theft Sy\ftem key
2 Anti-Theft Sy\ftem key \bMolded)
3 Key number plate
JVC0063XType D1 Anti-Theft Sy\ftem key
2 Key number plate
Your vehicle can only be driven with the Anti-Theft
Sy\ftem key\f, which are regi\ftered to your vehicle’\f
Anti-Theft Sy\ftem component\f. A\f many a\f 5 Anti-
Theft Sy\ftem key\f can be regi\ftered and u\fed with
one vehicle. The new key\f mu\ft be regi\ftered by a
RENAULT dealer prior to u\fe with the Anti-Theft
Sy\ftem of your vehicle. Since the regi\ftration proce\f\f
require\f era\fing all memory in the Anti-Theft Sy\ftem
component\f when regi\ftering new key\f, be \fure to
take all Anti-Theft Sy\ftem key\f that you have to the
RENAULT dealer.
CAUTION:
Do not allow the Anti-Theft System key, which
contains an electrical transponder, to come into
contact with water or salt water. This could
affect the system function.
*: Immobilizer
INTELLIGENT KEY \bif equipped)
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \b2)
2. Mechanical key \bin\fide the Intelligent Key) \b2)
3. Key number plate
Your vehicle can only be driven with the Intelligent
Key\f, which are regi\ftered to your vehicle’\f Intelligent
Key \fy\ftem component\f and Anti-Theft Sy\ftem*
component\f. A\f many a\f 4 Intelligent Key\f can be
regi\ftered and u\fed with one vehicle. The new key\f
mu\ft be regi\ftered by a RENAULT dealer prior to u\fe
with the Intelligent Key \fy\ftem and Anti-Theft Sy\ftem
of your vehicle. Since the regi\ftration proce\f\f require\f
Pre-driving checks and adjustments3-3
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
CHILD SAFETY REAR DOOR LOCK
SPA2037
T\fe c\fi\bd safety rear door \bocks \fe\bp prevent rear doors
from being opened accidenta\b\by, especia\b\by w\fen sma\b\b
c\fi\bdren are in t\fe ve\fic\be.
W\fen t\fe \bevers are in t\fe \bock position
*1, t\fe c\fi\bd
safety rear door \bocks engage and t\fe rear doors can
on\by be opened by t\fe outside door \fand\bes.
To disengage, move t\fe \bevers to t\fe un\bock position
*2. T\fe remote key\bess entry system can operate a\b\b door
\bocks (inc\buding t\fe back door) using t\fe remote
contro\b\ber. T\fe remote contro\b\ber can operate at a
distance of approximate\by 1 m (3.3 ft) away from t\fe
ve\fic\be. T\fe operating distance depends upon t\fe
conditions around t\fe ve\fic\be.
As many as 5 remote contro\b\bers can be used wit\f one
ve\fic\be. For information about t\fe purc\fase and use of
additiona\b remote contro\b\bers, contact a RENAULT
dea\ber.
T\fe remote contro\b\ber wi\b\b not function under t\fe
fo\b\bowing conditions:
.
W\fen t\fe distance between t\fe remote contro\b\ber
and ve\fic\be is more t\fan approximate\by 1 m (3.3
ft) .
. W\fen t\fe remote contro\b\ber battery is disc\farged.
. W\fen t\fe key is in t\fe ignition switc\f.
CAUTION:
.When locking the doors using the remote
controller, be sure not to leave the key in the
vehicle.
. Do not allow the remote controller, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the remote controller.
. Do not strike the remote controller sharply
against another object.
. Do not place the remote controller for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. When the outside temperature is extremely
low, the remote keyless entry system may not function properly.
If a remote contro\b\ber is \bost or sto\ben, RENAULT
recommends erasing t\fe ID code of t\fat remote
contro\b\ber from t\fe ve\fic\be. T\fis may prevent t\fe
unaut\forized use of t\fe remote contro\b\ber to un\bock
t\fe ve\fic\be. For information regarding t\fe erasing
procedure, contact a RENAULT dea\ber.
For information regarding t\fe rep\bacement of a battery,
see “Remote contro\b\ber battery” (P.8-24) .
USING REMOTE KEYLESS ENTRY SYSTEM
(if equipped)
JVP0213XType A (with panic alarm)*1LOCK button
*2UNLOCK button
*3PANIC button
*4Battery indicator \big\ft
Pre-driving checks and adjustments3-7
REMOTE KEYLESS ENTRY SYSTEM
(if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-8Pre-driving checks and adjustments
JVP0222XType B (without panic alarm)*1LOCK button
*2U\fLOCK button
*3Batte\by indicato\b light
Locking doo\bs
1. Remove the key f\bom the ignition switch.
2. Close all doo\bs including the back doo\b.
3. Push the “LOCK”
button*1on the \bemote
cont\bolle\b.
4. All doo\bs will be locked.
5. Ope\bate doo\b handles to confi\bm that the doo\bs have been secu\bely locked.
CAUTION:
After locking the doors using the remote con-
troller, be sure that the doors have been securely
locked by operating the door handles.
Unlocking doo\bs
1. Push the “U\fLOCK”button*2on the
\bemote cont\bolle\b.
2. All doo\bs including the back doo\b will be unlocked.
All doo\bs will be locked automatically unless one of the
following ope\bations is pe\bfo\bmed within 30 seconds
afte\b pushing the “U\fLOCK”
button*2on the
\bemote cont\bolle\b while the doo\bs a\be locked.
If du\bing this 30-second time pe\biod, the “U\fLOCK”
button on the \bemote cont\bolle\b is pushed, all doo\bs will
be locked automatically afte\b anothe\b 30 seconds.
. Opening any doo\bs.
. Inse\bting the key into the ignition switch.
Selecting door unlock mode (if equipped) :
When you fi\bst \beceive the vehicle, the doo\b unlock
mode is set to unlock all the doo\bs with one push of the
“U\fLOCK”
button*2. The doo\b unlock mode
can be switched to the selective doo\b unlock mode,
which unlocks the passenge\b’s doo\bs at the second
push of the “U\fLOCK”
button*2.
Selective doo\b unlock mode:
1. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b.
2. The d\bive\b’s doo\b unlocks.
3. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b again.
4. All doo\bs will be unlocked.
To switch to the selective doo\b unlock mode, pe\bfo\bm
the following p\bocedu\be.
Push the “LOCK”
and “U\fLOCK”buttons
simultaneously fo\b mo\be than 5 seconds.
Pe\bfo\bm the same p\bocedu\be to deactivate the
selective doo\b unlock mode. .
When the selective doo\b unlock mode is set, the
haza\bd indicato\b flashes 3 times.
. When the all doo\b unlock mode is set, the haza\bd
indicato\b flashes once.
Using panic ala\bm (if equipped)
If you a\be nea\b you\b vehicle and feel th\beatened, you
may activate the ala\bm to call attention as follows:
1. Push the “PA\fIC”
button*3on the
Intelligent Key fo\b more than 0.5 second.
2. The theft wa\bning ala\bm will stay on fo\b 25 seconds.
3. The panic ala\bm stops when:
. It has \bun fo\b 25 seconds, o\b
. Any of the buttons on the Intelligent Key a\be
pushed. (\fote: Panic button should be pushed fo\b
mo\be than 0.5 second.)
Batte\by indicato\b light
The batte\by indicato\b light*4(Type A) o\b*3(Type B)
illuminates when you push any button. If the light does
not illuminate, the batte\by is weak o\b needs \beplace-
ment. Fo\b info\bmation \bega\bding \beplacement of a
batte\by, see “Remote cont\bolle\b batte\by” (P.8-24) .
Haza\bd indicato\b ope\bation
When you lock o\b unlock the doo\bs, the haza\bd
indicato\b will flash as a confi\bmation.
. “LOCK”: The haza\bd indicato\b flashes once.
. “U\fLOCK”: The haza\bd indicato\b flashes twice.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \f2)
2. Mec\banical key \finside t\be Intelligent Key) \f2)
3. Key number plate
WARNING:
.Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
T\be Intelligent Key system can operate all t\be door
\fincluding t\be back door) locks using t\be remote
controller function or pus\bing t\be request switc\b on
t\be ve\bicle wit\bout taking t\be key out from a pocket or
purse. T\be operating environment and/or conditions
may affect t\be Intelligent Key system operation.
Be sure to read t\be following before using t\be
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
T\be Intelligent Key is always communicating wit\b t\be
ve\bicle as it receives radio waves. T\be Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere wit\b t\be operation of t\be
Intelligent Key system under t\be following operating
conditions.
. W\ben operating near a location w\bere strong
radio waves are transmitted, suc\b as a TV tower,
power station and broadcasting station.
. W\ben in possession of wireless equipment, suc\b
as a cellular telep\bone, transceiver, and CB radio. .
W\ben t\be Intelligent Key is in contact wit\b or
covered by metallic materials.
. W\ben any type of radio wave remote control is
used nearby.
. W\ben t\be Intelligent Key is placed near an electric
appliance suc\b as a personal computer.
. W\ben t\be ve\bicle is parked near a parking meter.
In suc\b cases, correct t\be operating conditions before
using t\be Intelligent Key function or use t\be mec\banical
key.
Alt\boug\b t\be life of t\be battery varies depending on t\be
operating conditions, t\be battery’s life is approximately
2 years. If t\be battery is disc\barged, replace it wit\b a
new one.
For information regarding replacement of a battery, see
“Intelligent key battery” \fP.8-25) .
Since t\be Intelligent Key is continuously receiving radio
waves, if t\be key is left near equipment w\bic\b transmits
strong radio waves, suc\b as signals from a TV and
personal computer, t\be battery life may become
s\borter.
To start t\be engine w\ben t\be Intelligent Key battery is
disc\barged, see “Pus\b-button ignition switc\b \fmodel
wit\b Intelligent Key system)” \fP.5-6) . Replace t\be
disc\barged battery wit\b a new one as soon as
possible.
Because t\be steering w\beel is locked electrically,
unlocking t\be steering w\beel wit\b t\be ignition switc\b in
t\be “LOCK” position is impossible w\ben t\be ve\bicle
battery is completely disc\barged. In t\bis case, unlock-
ing t\be steering w\beel would be also impossible. Pay
special attention t\bat t\be ve\bicle battery is not
completely disc\barged.
As many as 4 Intelligent Keys can be used wit\b one
ve\bicle. For information about t\be purc\base and use of
additional Intelligent Keys, contact a RENAULT dealer.
Pre-driving checks and adjustments3-9
INTELLIGENT KEY SYSTEM (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
USING REMOTE KEYLESS ENTRY FUNC-
TION
Oper\ftin\b r\fn\be
SPA2252Type A (with panic alarm)
SPA2045Type B (without panic alarm)It is possible to lock/unlock \fll doors includin\b the b\fck
door usin\b the remote keyless entry system. The
oper\ftin\b dist\fnce depends upon the conditions
\fround the vehicle. To securely oper\fte the lock \fnd
unlock buttons, \fppro\fch the vehicle to \fbout 1 m (3.3
ft) from the door.
The remote keyless entry system will not function under
the followin\b conditions:.
When the Intelli\bent Key is not within the
oper\ftion\fl r\fn\be.
. When the Intelli\bent Key b\fttery is disch\fr\bed.
For inform\ftion re\b\frdin\b the repl\fcement of \f b\fttery,
see “B\fttery” (P.8-23) .
Lockin\b doors
When you lock or unlock the doors includin\b the b\fck
door, the h\fz\frd indic\ftor will fl\fsh \fs \f confirm\ftion.
1. Pl\fce the i\bnition switch in the “OFF” position \fnd c\frry the Intelli\bent Key.
2. Close \fll doors (includin\b the b\fck door) .
3. Push the “LOCK”
button*1on the
Intelli\bent Key.
4. All doors will be locked.
5. Oper\fte the door h\fndles to confirm th\ft the doors h\fve been securely locked.
CAUTION:
After locking the doors using the Intelligent Key,
be sure that the doors have been securely
locked by operating the door handles.
Unlockin\b doors
1. Push the “UNLOCK”button*2on the
Intelli\bent Key.
2. All doors (includin\b the b\fck door) will be unlocked.
All doors will be locked \futom\ftic\flly unless one of the
followin\b oper\ftions is performed within 30 seconds
\ffter pushin\b the “UNLOCK”
button on the
Intelli\bent Key while the doors \fre locked. If durin\b this
30-second time period, the “UNLOCK”
button on
the Intelli\bent Key is pushed, \fll doors will be locked
\futom\ftic\flly \ffter \fnother 30 seconds. .
Openin\b \fny door or b\fck door.
. Pushin\b the i\bnition switch.
Selecting door unlock mode (if equipped) :
When you first receive the vehicle, the door unlock
mode is set to unlock \fll the doors with one push of the
“UNLOCK”
button*2. The door unlock mode
c\fn be switched to the selective door unlock mode,
which unlocks the p\fssen\ber’s doors \ft the second
push of the “UNLOCK”
button*2
Selective door unlock mode:
1. Push the “UNLOCK”
button*2on the
Intelli\bent Key.
2. The driver’s door unlocks.
3. Push the “UNLOCK”
button*2on the
Intelli\bent Key \f\b\fin.
4. All doors will be unlocked.
To switch to the selective door unlock mode, perform
the followin\b procedure.
Push the “LOCK”
\fnd “UNLOCK”buttons
simult\fneously for more th\fn 5 seconds. Perform the
s\fme procedure to de\fctiv\fte the selective door
unlock mode.
. When the selective door unlock mode is set, the
h\fz\frd indic\ftor fl\fshes 3 times.
. When the \fll door unlock mode is set, the h\fz\frd
indic\ftor fl\fshes once.
Pre-driving checks and adjustments3-15
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-16Pre-driving checks and adjustments
Using panic alarm (if eq\fipped)
If \bo\f are near \bo\fr vehicle and feel threatened, \bo\f
ma\b activate the alarm to call attention as follows:
1. P\fsh the “PANIC”
b\ftton*3on the
Intelligent Ke\b for more than 0.5 second.
2. The theft warning alarm will sta\b on for 25 seconds.
3. The panic alarm stops when:
. It has r\fn for 25 seconds, or
. An\b of the b\fttons on the Intelligent Ke\b are
p\fshed. (Note: Panic b\ftton sho\fld be p\fshed for
more than 0.5 second.)
Hazard indicator operation
When \bo\f lock or \fnlock the doors, the hazard
indicator will flash as a confirmation.
.“LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice. Yo\fr vehicle is eq\fipped with either or both of the
following sec\frit\b s\bstems:
.
Theft warning s\bstem
. Anti-Theft S\bstem*
(* immobilizer)
The sec\frit\b condition will be shown b\b the sec\frit\b
indicator light.
THEFT WARNING SYSTEM
The theft warning s\bstem provides vis\fal and a\fdio
alarm signals if parts of the vehicle are dist\frbed.
Sec\frit\b indicator light
SIC2045
The sec\frit\b indicator light is located in the meter
panel.
This light operates whenever the ignition switch is in
the “ACC”, “OFF” or “LOCK” position. This is normal.
How to activate the system:
1. Close all windows and p\fsh the ignition switch to the “OFF” position.
The system can be activated even if the
windows are open. 2. Carr\b the Intelligent Ke\b with \bo\f and get o\ft of
the vehicle.
3. Make s\fre the hood is closed. Close and lock all doors with the door handle req\fest switch, LOCK
b\ftton*1on the Intelligent Ke\b (If the door
is locked \fsing the inside lock knob, the s\bstem
will not be activated) or power door lock switch (If
the door is locked \fsing the power door lock
switch with all the doors closed, the s\bstem will
not be activated. To activate the s\bstem, lock the
door \fsing the power door lock switch with an\b of
the doors open, then close all the doors) .
4. Confirm that the sec\frit\b indicator light comes on. The sec\frit\b indicator light sta\bs on for approxi-
matel\b 30 seconds. The vehicle sec\frit\b s\bstem is
now pre-armed. After approximatel\b 30 seconds
the vehicle sec\frit\b s\bstem a\ftomaticall\b shifts
into the armed phase. The sec\frit\b light begins to
flash once ever\b approximatel\b 3 seconds.
If, d\fring this 30-second pre-arm time period, the
door is \fnlocked with the door handle req\fest
switch, the “UNLOCK”
b\ftton*2on the
Intelligent Ke\b, the power door lock switch, or the
ignition switch is p\fshed to the “ACC” or “ON”
position, the s\bstem will not arm.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors locked and ignition switch in the “LOCK”
position. Push the ignition switch to the “ACC” or
“ON” position to turn the system off.
Theft warning system operation:
The warning s\bstem will give the following alarm:
. The hazard indicator blinks and the horn so\fnds
intermittentl\b for approximatel\b 30 seconds.
SECURITY SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-28Heater and air conditioner, and audio system
*1*2*3*4*5*6Radio memory buttons:
The audio system can store u\f to 18 FM station
\brequencies (six in each o\b FM 1, FM 2 and FM T) , 6
MW and 6 LW station \brequencies.
To store the station \brequency manually:
1. Tune to the desired broadcasting station \bre- quency by using the
orbutton.
2. Push and hold a radio memory button
*1-*6until a bee\f sounds. (The radio mutes when the
memory button is \fushed.)
3. The channel indicator will dis\flay and the radio mute disengages, indicating that the memory is
stored \fro\ferly.
4. Per\borm ste\fs 1 - 3 \bor all other memory buttons.
I\b the battery cable is disconnected, or i\b the audio \buse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Radio data system (RDS)
Alternative Frequency (AF):
. The AF \bunction o\ferates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setu\f menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
. Automatic switching function
This \bunction com\fares the strengths o\b the
signals o\b all the stations on the AF list and
selects the station with the o\ftimum rece\ftion
conditions.
. Program Information (PI) search
Program In\bormation (PI) search begins automati- cally i\b no suitable station is \bound with the above
automatic switching \bunction. The PI search
\bunction checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is dis\flayed. The PI search o\fera-
tion sto\fs when a suitable station is \bound. I\b no
station is \bound once all the \brequencies have been
searched, the radio returns to the \frevious
\brequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning o\b other \freset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
rece\ftion o\b RDS EON stations in the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is dis\flayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code) , the sound is inter-
ru\fted, the emergency broadcast is heard, and
“PTY31 ALARM” is dis\flayed. The volume level at
this time is the same as that \bor tra\b\bic announce-
ments. Once the emergency broadcast is \binished,
the unit immediately returns to the \frevious
source.
. REG (Regional) mode
Some local radio stations are linked together according to their region because they only o\b\ber
limited coverage due to their limited number o\b
transmitters. I\b the signal \brom one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will kee\f receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
Traffic Announcement (TA):
. The TA \bunction o\ferates in the FM and CD
modes.
. The TA mode is turned on or o\b\b when the TA/
NEWS button is \fushed \bor less than 2 seconds.
. The TA mode o\ferates regardless o\b whether the
AF mode is on or o\b\b.
. “TA ON” is dis\flayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
dis\flayed when the TA mode is turned o\b\b, and the
TA indicator turns o\b\b.
The \bollowing \bunctions o\ferate when the TA mode is
on:
. Traffic announcement interrupt function
When a tra\b\bic announcement is received, the
announcement is tuned in and the volume
increases to the set level.
Once the tra\b\bic announcement is \binished, the unit
returns to the source which was set be\bore the
tra\b\bic announcement started, and the volume
returns to the \frevious level. For EON stations,
the radio is interru\fted by another EON station
with tra\b\bic announcements.
The tra\b\bic announcement interru\ft mode is
&RQGLWLRQ