2012 RENAULT PULSE ignition


> (GLW    0RGHO .$2(0B5HQDXOW @
16. Radio memory buttons
17. RP\f (Repeat)\bMIX (Mix play) button
Anti-theft system (if equipped)
\fhis unit can only be activated when the ignition switch
for Anti-\fheft System is in the “ACC” or “ON” position.
Each radio is uniquely matched to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
\fhe audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
\fo turn on the audio system, push the POWER ON\b
OFF button.
.\fhe system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
\fo turn off the audio system, push the POWER ON\b
OFF button.
Volume control:
\fo control the volume, turn the VOLUME control dial.
\furn the VOLUME control dial clockwise to make the
sound louder.
\furn the VOLUME control dial counterclockwise to
make the sound quieter.
Sound preference button:
\fo enter the audio mode (radio or CD) , push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode. \fo change the audio settings (BASS, \fREBLE,
FADER, BALANCE, EQ) , push the
button or
EN\fER button to select the mode.
BASS ?\fREBLE ?BALANCE ?FADER ?EQ ?
BASS
\fo adjust each audio setting, turn the VOL control dial
clockwise or counterclockwise.
BASS: (í) to decrease \b (+) to increase
\fREB(LE): (í) to decrease \b (+) to increase
BAL(ANCE): (R) to right balance \b (L) to left balance
FADE(R): (F) to front fade \b (R) to rear fade
EQ (Equalizer): Use this control to change the preset
sound mode for CD play.
\furn the MENU\bVOL dial clockwise or counterclock-
wise. \fhe mode will change as follows:
OFF ⇔ENHANCE
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
\fo configure the SPEED volume and BEEP settings,
perform the following procedure:
1. Push the MENU button.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
PHONE SE\fUP ⇔SPEED VOL⇔CLOCK ⇔
BEEP ⇔PHONE SE\fUP
. When SPEED VOL appears on the display, briefly
push on the EN\fER button then turn the VOLUME
dial clockwise or counterclockwise to adjust the
level of the volume. Adjusting the setting to 0 (zero) turns off the
speed volume feature. Increasing the speed
volume setting results in the audio volume
increasing more rapidly with vehicle speed. Push
the EN\fER button again to save the setting.
. When BEEP appears on the display, briefly push
the EN\fER button and then turn the VOLUME dial
clockwise or counterclockwise to switch the beep
sound on or off. Push the EN\fER button again to
save the setting.
\fo configure Alternative Frequency, Regional and
Language settings, perform the following procedure:
1. Push and hold the MENU button for at least 1.5 seconds.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
AF⇔REG ⇔LANGUAGE ⇔AF
. \fo activate or deactivate the AF and REG mode,
briefly push on the EN\fER button when AF or
REG appears on the display and turn the
VOLUME dial clockwise or counterclockwise to
switch between the off or on position. After
selection, push the EN\fER button to confirm the
settings.
— When the AF mode is enabled, the audio unit
will automatically re-tune to a stronger fre-
quency if the radio signal becomes weak.
— When the REG mode is enabled, the audio unit will maintain and hold the station which is
broadcasting local (regional) programmes.
. \fo change the display language, briefly push the
EN\fER button when LANGUAGE appears on the
display then turn the VOLUME dial clockwise or
counterclockwise to select the appropriate lan-
guage setting.
Heater and air conditioner, and audio system4-25
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-26Heater and air conditioner, and audio system
ENGLISH⇔DUTCH ⇔FRENCH ⇔SPANISH
⇔ GER\fAN ⇔ITALIAN ⇔PORTUGUESE ⇔
ENGLISH
Aft\br s\bl\bcting th\b d\bsir\bd languag\b, push th\b
ENTER button to \bxit th\b m\bnu.
Aft\br th\b d\bsir\bd l\bv\bls hav\b b\b\bn s\bt, push th\b \fENU
button to \bxit th\b m\bnu or wait at l\bast for 10 s\bconds
without pr\bssing any buttons.
Clock :
Clock display can b\b turn\bd on and off, and clock can
b\b adjust\bd.
. Wh\bn clock is not display\bd
1. Turn th\b audio unit on by pushing th\b POWER ON/OFF button.
2. Push th\b \fENU button and turn th\b VOLU\fE control knob until “CLOCK” is display\bd.
3. Push th\b ENTER button. (“CLOCK OFF” is display\bd)
4. Turn th\b VOLU\fE control knob to turn th\b clock display mod\b on. (“CLOCK ON” is display\bd)
5. Push th\b ENTER button. Th\b hour display will start flashing.
6. Turn th\b VOLU\fE control knob to adjust th\b tim\b.
7. Push th\b ENTER button. Th\b minut\b display will start flashing.
8. Turn th\b VOLU\fE control knob to adjust th\b tim\b.
9. Push th\b ENTER button to finish th\b clock adjustm\bnt.
. Wh\bn clock is display\bd
1. Turn th\b audio unit on by pushing th\b POWER ON/OFF button.
2. Push th\b \fENU button and turn th\b VOLU\fE control knob until “CLOCK” is display\bd. 3. Push th\b ENTER button. (“CLOCK ON” is
display\bd.)
4. P\brform st\bps 5 to 9 abov\b to adjust th\b tim\b.
CD play\br op\bration
JVH0004X
Th\b audio syst\bm op\brat\bs wh\bn th\b ignition switch is
in th\b “ACC” or “ON” position.
Loading:
Ins\brt a CD into th\b slot with th\b lab\bl sid\b facing up.
Th\b CD will b\b guid\bd automatically into th\b slot and
will start playing. If th\b radio is alr\bady playing, it will
automatically turn off, and th\b CD will start playing.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
Aft\br loading th\b CD, th\b numb\br of tracks and th\b
playtim\b will app\bar on th\b display.
8 cm (3.1 in) diam\bt\br CDs can b\b play\bd without
using an adapt\br.
CD button:
Wh\bn th\b
button is push\bd whil\b th\b audio
syst\bm is off and a CD is load\bd, th\b audio syst\bm will
turn on and a CD will start playing automatically. If th\b
radio is alr\bady playing, it will automatically turn off and
th\b CD will start playing.
FF (Fast Forward) , REW (Rewind)
button :
Wh\bn th\b (fast forward) or (r\bwind) button is push\bd
whil\b th\b CD is b\bing play\bd, th\b CD will play whil\b
fast forwarding or r\bwinding. Wh\bn th\b button is
r\bl\bas\bd, th\b CD will r\bturn to normal play sp\b\bd.
TRACK UP/DOWN button:
Wh\bn th\b
button is push\bd whil\b a CD is b\bing
play\bd, th\b pr\bs\bnt track will b\b advanc\bd and mov\b to
th\b n\bxt track. Push th\b
button s\bv\bral tim\bs to
skip forward tracks. Th\b CD will advanc\b th\b numb\br
of tim\bs th\b button is push\bd. Wh\bn th\b last track of
th\b CD is forward\bd, th\b first track will b\b play\bd.
Wh\bn th\b
button is push\bd whil\b a CD is b\bing
play\bd, th\b pr\bs\bnt track will start ov\br from th\b
b\bginning. Push th\b
button s\bv\bral tim\bs to skip
back tracks. Th\b CD will r\bwind th\b numb\br of tim\bs
th\b button is push\bd. Wh\bn th\b first track of th\b CD is
r\bwound, th\b last track will b\b play\bd.
Repeat/MIX button:
Push th\b
button r\bp\bat\bdly to chang\b th\b play
mod\b as follows:
RPT (REPEAT) TRACK ?\fIX DISC ?RPT
(REPEAT) ALL
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Audio main operation
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the PWR button.
Volume control:
To control the volume, turn the VOLUME control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
MENU button:
To change the audio settings, push the
button to
select the mode while the CD or radio is on.
Push the
button until the desired mode appears
on the display.
BASS ?TREBLE ?FADE ?BALA\bCE ?BEEP ?
CLOCK ?BASS
Push the SEEK/TRACK button (
or) or
TU\bE/FF·REW/FOLDER button (or) to
adjust the audio settings.
:( í) to decrease / (+) to increase
:(í) to decrease / (+) to increase
: (F) to front fade / (R) to rear fade
: (R) to right balance / (L) to left balance
Once the audio settings are set to the desired level, push the
button until the radio or CD display
appears.
If no action is performed for approximately 5 seconds,
the audio settings mode will automatically return to the
normal mode.
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired
mode is displayed. This turns on or off the beep sound
when audio buttons are pushed.
Clock display:
To display the clock on the screen, perform the
following operations.
1. Push the
button repeatedly until CLOCK O\b
or OFF appears on the display while the audio
system is on.
2. Push the SEEK/TRACK button
oror
TU\bE/FF·REW/FOLDER buttonorto select CLOCK O\b.
Clock adjustment:
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
2. To adjust the hours, push the SEEK/TRACK button
or.
3. To adjust the minutes, push the TU\bE/FF·REW/ FOLDER button
or.
If no user input is detected for 10 seconds, or when
the \fME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
JVH0012X
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
When the
button is pushed while a CD with a title
is being played, the display will change as follows:
Heater and air conditioner, and audio system4-31
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
monaural cable is used.
CD player operation
\fAA23\b0
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. If the radio is already playing, it will
automatically turn off, and the CD will start playing.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
After loading the CD, the number of tracks and the
playtime will appear on the display.
CD button:
When the
button is pushed while the audio
system is off and a CD is loaded, the audio system will
turn on and a CD will start playing automatically. If the
radio is already playing, it will automatically turn off and
the CD will start playing.
/FF (Fast Forward) , REW (Rewind)
button:
Push and hold the FF or REW button while a CD is
being played to fast-forward or rewind though the
track. When the button is released, the CD will return
to the normal play speed.
/TRACK UP/ DOWN button:
Push the track up button while a CD is being played to
skip forward to the next track. The CD will advance the
number of times the button is pushed. When the last
track of the CD is skipped, the first track will be played.
Push the track down button while a CD is being played
to start the present track again from the beginning.
Push the track down button several times to skip back
to the previous track. The CD will skip tracks backward
the number of times the button is pushed. When the
first track of the CD is skipped, the last track will be
played.
Repeat button:
Push the
button repeatedly to change the play
mode as follows:
RPT (REPEAT) TRACK ?RPT (REPEAT) ALL ?RPT
(REPEAT) TRACK
RPT TRACK:
The selected track will be played repeatedly.
RPT ALL:
All the tracks on the CD will be played in sequential
order.
MIX button:
Push the
button repeatedly to change the play
mode as follows:
MIX DI\fC ?RPT (REPEAT) ALL ?MIX DI\fC
MIX DI\fC:
All the tracks on the CD will be played in a random
order.
RPT ALL:
All the tracks on the CD will be played in sequential
order.
CD EJECT button:
When the
button is pushed while a CD is loaded,
the CD will be ejected.
When the
button is pushed twice, the CD will be
ejected further, and the CD can be removed easily.
If a CD is ejected by pushing the
button, and it is
not taken out from the loading slot, the CD will
automatically be reloaded to the slot to protect the CD.
LW-MW-FM radio operation
\fAA23\b0
Heater and air conditioner, and audio system4-37
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
17. AUX IN (auxiliary input\f jack
1\b. RPT (Repeat\f/MIX (Mix play\f button
19. TUNE/SEARCH button
Anti-theft system (if equipped\f
This unit can only be activated when the ignition switch
for Anti-Theft System is in the “ACC” or “ON” position.
Each radio is uniquely matched to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
To turn on the audio system, push the POWER ON/
OFF button.
.The system will turn on in the mode, (radio or CD\f
which was used immediately before the system
was last turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the POWER ON/
OFF button.
Volume control:
To control the volume, turn the VOLUME control dial.
Turn the VOLUME control dial clockwise to increase
the audio volume.
Turn the VOLUME control dial counterclockwise to
decrease the audio volume.
Sound preference button:
To enter the audio mode (radio or CD\f , push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode.
To change the audio settings (BASS, TREBLE,
FADER, BALANCE, EQ\f , push the
button or
ENTER button to select the mode.
BASS ?TREBLE ?BALANCE ?FADER ?EQ ?
BASS
To adjust each audio setting, turn the MENU/VOL
control dial clockwise or counterclockwise.
BASS: (í\f to decrease / (+\f to increase
TREB(LE\f: (í\f to decrease / (+\f to increase
BAL(ANCE\f: (R\f to adjust to the right / (L\f to adjust to
the left
FADE(R\f: (F\f to adjust to the front / (R\f to adjust to the
rear
EQ (Equalizer\f: Use this control to change the preset
sound mode for CD play.
Turn the MENU/VOL dial clockwise or counterclock-
wise. The mode will change as follows:
OFF ⇔ENHANCE ⇔OFF
If the audio settings mode is unchanged for approxi-
mately \b seconds, the audio settings mode will
automatically return to the normal mode.
Clock display:
Turning on/off the clock display
To turn on or off the clock display, perform the
following operations.
1. Push the MENU button while the audio system is on. ("PHONE SETUP" is displayed.\f 2. Turn the VOLUME control knob until "CLOCK"
appears on the display.
3. Push the ENTER button. ("CLOCK OFF" or "CLOCK ON" is displayed.\f
4. To turn on the clock display, turn the VOLUME control knob till "CLOCK ON" is displayed. To turn
off the clock display, turn the VOLUME control
knob till "CLOCK OFF" is displayed, and push
ENTER.
Clock adjustment
To adjust the time of the clock, perform the following
operations.
1. Push the ENTER button while "CLOCK ON" is displayed.
2. The hour display will flash.
3. Turn the VOLUME control knob to adjust the hour.
4. Push the ENTER button. The minute display will flash.
5. Turn the VOLUME control knob to adjust the minute.
6. Push the ENTER button to complete the clock adjustment.
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analog audio
input such as from a portable cassette tape player, CD
player, MP3 player or laptop computer.
Push the AUX button to play a compatible device when
it is plugged into the AUX IN jack.
RENAULT strongly recommends using a stereo mini
plug cable when connecting your music device to the
audio system. Music may not play properly when a
Heater and air conditioner, and audio system4-41
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-42Heater and air conditioner, and audio system
monaural cable is used.
CD c\fanger operation
\bVH0045X
T\fe audio system operates w\fen t\fe ignition switc\f is
in t\fe “ACC” or “ON” position.
CD LOAD button:
W\fen t\fe
button is pus\fed, t\fe CD loading slot
will open and t\fe loading position will be displayed.
Insert t\fe CD into t\fe slot wit\f t\fe label side facing up.
T\fe CD will be guided automatically into t\fe slot and
will start playing. If t\fe radio is already playing, it will
automatically turn off and t\fe CD will start playing.
CAUTION:
. Do not force the compact disc into the slot.
This could damage the player.
. Do not use 8 cm (3.1 in) discs.
After loading t\fe CD, t\fe slot number and CD track will
appear on t\fe display.
To load a CD in t\fe CD c\fanger: 1. Pus\f t\fe
button for less t\fan 1.5 seconds.
2. Select t\fe loading slot by pus\fing t\fe CD select button. If no slot is selected, t\fe CD c\fanger will
automatically select an available slot.
3. Insert t\fe CD into t\fe slot.
To load 6 CDs in t\fe CD c\fanger:
1. Pus\f t\fe
button for more t\fan 1.5 seconds.
2. Insert a CD into t\fe slot.
3. W\fen t\fe next loading slot number illuminates on t\fe display, insert t\fe next CD into t\fe slot.
To load 6 CDs in t\fe CD c\fanger:
1. Pus\f t\fe
button for more t\fan 1.5 seconds.
2. Insert t\fe CD into t\fe slot.
3. W\fen t\fe next loading slot number illuminates on t\fe display, insert t\fe next CD into t\fe slot.
T\fe slot number indicator appears on t\fe display w\fen
t\fe CDs are loaded in t\fe CD c\fanger and t\fe audio
system is turned on.
CD PLAY button:
W\fen t\fe
button is pus\fed w\file t\fe audio
system is off and CDs are loaded, t\fe audio system will
turn on and t\fe CD will start to play automatically. If t\fe
radio is already operating, it will automatically turn off
and t\fe CD will start playing.
FF (Fast Forward) , REW (Rewind)
button:
Pus\f t\fe
(fast forward) or(rewind) button
w\file a CD is being played to fast-forward or rewind
t\froug\f t\fe track. W\fen t\fe button is released, t\fe CD
will return to normal play speed.
TRACK UP/DOWN button:
Pus\f t\fe
button w\file a CD is being played to
skip forward to t\fe next track. T\fe CD will skip tracks
forward t\fe number of times t\fe button is pus\fed.
W\fen t\fe last track of t\fe CD is skipped, t\fe first track
will be played.
Pus\f t\fe
button w\file a CD is being played to
start t\fe present track again from t\fe beginning. Pus\f
t\fe
button several times to skip back to t\fe
previous track. T\fe CD will skip tracks backward t\fe
number of times t\fe button is pus\fed. W\fen t\fe first
track of t\fe CD is skipped, t\fe last track will be played.
*1*2*3*4*5*6CD select buttons:
To c\fange to anot\fer CD loaded in t\fe CD c\fanger,
pus\f t\fe corresponding CD select button. W\fen a CD
is selected, t\fe selected CD will be automatically
played from t\fe first track.
RPT (Repeat)·MIX button:
Pus\f t\fe
button repeatedly to c\fange t\fe play
mode as follows:
RPT (REPEAT) TRACK ?RPT (REPEAT) DISC ?
MIX DISC ?MIX ALL ?RPT (REPEAT) ALL ?RPT
(REPEAT) TRACK
RPT TRACK:
T\fe CD c\fanger plays t\fe current track con-
tinuously.
RPT DISC:
T\fe CD c\fanger repeats t\fe disc currently being
playing.
MIX ALL:
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
All the tracks on all of the CDs will be pla\fed in a
random order.
\bIX DISC:
The CD changer pla\fs all the tracks from one
disc once in a random order.
RPT ALL:
All the tracks of all the CDs will be pla\fed
continuousl\f in sequential order.
CD EJECT button:
When the
button is pushed for less than 1.5
seconds while CDs are loaded, the previousl\f pla\fed
CD will be ejected.
When the
button is pushed for less than 1.5
seconds while a CD is being pla\fed, the CD being
pla\fed will be ejected, and the next CD will be pla\fed.
When the
button is pushed for more than 1.5
seconds while CDs are loaded, all of the CDs in the
CD changer will be ejected.
If a CD is ejected b\f pushing the
button, and it is
not taken out from the loading slot within 15 seconds,
the CD will automaticall\f be reloaded into the slot to
protect the CD.
If an error message appears on the displa\f, push the
button.
When the ignition switch is in the “OFF” or “LOCK”
position, it is possible to eject all the CDs. However,
the audio unit will not be activated.
LW-\bW-F\b radio operation
JVH0045X
The audio s\fstem operates when the ignition switch is
in the “ACC” or “ON” position.
FM-AM button:
When the
button is pushed while the audio
s\fstem is off, the audio s\fstem and the radio will turn
on. When the
button is pushed while the CD
pla\fer is alread\f operating, it will automaticall\f turn off
and the radio will turn on.
To change the radio band, push the
button until
the preferred band appears.
F\b 1 ?F\b 2 ?F\b T ?\bW ?LW
During F\b reception, when the
button is pushed
for longer than 1.5 seconds, stations are searched for
and the 6 stations of the F\b T band. The sound is
muted until the auto store operation is completed,
upon which preset channel 1 is automaticall\f tuned in.
TUNE button:
When adjusting the broadcasting station frequenc\f
manuall\f, push the
button until the preferred
frequenc\f is obtained.
The frequenc\f changes in steps of 100 kHz on the F\b
band, 9 kHz on the \bW band, and 3 kHz on the LW
band.
SEEK button:
When adjusting the broadcasting station frequenc\f
automaticall\f, push the
button. When the
s\fstem detects a broadcasting station, it will stop at
that station.
*1*2*3*4*5*6Radio memory buttons:
The audio s\fstem can store up to 18 F\b station
frequencies (six in each of F\b 1, F\b 2 and F\b T) , 6
\bW and 6 LW station frequencies.
To store the station frequenc\f manuall\f:
1. Tune to the preferred broadcasting station fre- quenc\f b\f using the
orbutton.
2. Push and hold a radio memor\f button
*1-*6until a beep sounds. (The radio mutes when the
memor\f button is pushed.)
3. The channel indicator will be displa\fed and the radio mute will be cancelled, indicating that the
memor\f is stored properl\f.
4. Perform steps 1 - 3 for all other memor\f buttons.
If the batter\f cable is disconnected, or if the audio fuse
blows, the radio memor\f will be erased. If this occurs,
reset the desired stations.
Heater and air conditioner, and audio system4-43
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Audio main operation
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
Power/VOL dial:
Power ON/OFF:
To turn on the audio system, push the
dial.
. The system will turn on in the mode, which was
used immediately before the system was turned
off.
. If a CD is inserted or a USB and/or an AUX device
is connected when the system is turned off, and if
the system is turned on again with the devices
removed or disconnected, the radio will turn on.
To turn off the audio system, push the
dial.
Volume control:
To control the volume, turn the
dial.
Turn the
dial clockwise to make the sound louder.
Turn the
dial counterclockwise to make the sound
quieter.
SETUP button:
To configure Audio, Clock, Bluetooth, Language or
Scroll direction settings, perform the following proce-
dure:
1. Push the
button.
2. Push the TU\bE/ME\bU/E\bTER dial.
3. Turn the TU\bE/ME\bU/E\bTER dial clockwise or counterclockwise. The setting menu will be dis-
played in the following order:
Audio ⇔Clock ⇔Bluetooth ⇔Language ⇔
Scroll Direction
After the desired levels have been set, either push the
button repeatedly, push thebutton, or wait
for several seconds without pushing any buttons to exit
the menu screen.
Audio adjustments:
Push the
button to enter the setup menu screen
and then select \fAudio”.
Each time the TU\bE/ME\bU/E\bTER dial is pushed, the
mode will change as follows:
BASS ?TREBLE ?BALA\bCE ?FADE ?AUX
VOL ?SPD VOL (if equipped) ?Audio (setup menu
screen) ?BASS
Turn the TU\bE/ME\bU/E\bTER dial clockwise or
counterclockwise to adjust the following items and
push the TU\bE/ME\bU/E\bTER dial to confirm.
Bass control:
Use this control to enhance or attenuate the bass
response sound.
Treble control:
Use this control to enhance or attenuate the treble.
Balance control:
Use this control to adjust the balance of the volume
between the left and right speakers.
Fader control:
Use this control to adjust the balance of the volume
between the front and rear speakers (if equipped) .
AUX VOL (Auxiliary volume) control:
Use this control to adjust the volume output from the
auxiliary source.
SPD VOL (Speed volume) control (if equipped):
This mode controls the volume output from the
speakers automatically in relation to vehicle speed.
Adjusting the setting to \f0” (zero) turns off the speed volume feature.
Clock setting:
Push the
button to enter the setup menu screen
and then select \fClock”.
Turn the TU\bE/ME\bU/E\bTER dial, the mode will
change as follows:
Set Time ⇔O\b/OFF ⇔Clock Format ⇔Set Time
Set Time:
Select \fSet Time” then adjust the clock as follows:
The hour display will start flashing. Turn the TU\bE/
ME\bU/E\bTER dial to adjust the hour and push the
TU\bE/ME\bU/E\bTER dial. The minute display will start
flashing. Turn the TU\bE/ME\bU/E\bTER dial to adjust
the minute and push the TU\bE/ME\bU/E\bTER dial to
finish the clock adjustment.
O\b/OFF:
Set the clock display to on or off when the audio unit is
turned off. If set in the \fO\b” position, the clock will be
displayed when the audio unit is turned off either by
pushing the
dial or when the ignition switch is
placed in the \fOFF” position.
Clock Format:
Switch the clock display between 24-hour and 12-
hour clock mode.
Bluetooth setting:
It is possible to set the Bluetooth settings. (See
\fBluetooth
Šaudio player operation” (P.4-52) .)
Language setting:
Push the
button to enter the setup menu screen
and then select \fLanguage”.
Select the appropriate language and push the TU\bE/
ME\bU/E\bTER dial. Upon completion, the screen will
automatically adopt the language setting.
Heater and air conditioner, and audio system4-47
&RQGLWLRQ