2012 RENAULT PULSE light


> (GLW    0RGHO .$2(0B5HQDXOW @
2-42Instruments and controls
CAUTION:
.Do not leave the light switch on when the
engine is not running for extended periods
of time to prevent the battery from being
discharged.
. Turn off the lights when you leave the
vehicle.
JVI0022X
ROOM LIGHT
The roo\f ligh\b*Ahas a \bhree-posi\bion swi\bch.
When \bhe swi\bch is in \bhe on posi\bion
*3, \bhe ligh\b
illu\fina\bes.
When \bhe swi\bch is in \bhe cen\ber posi\bion
*2, \bhe roo\f
ligh\b illu\fina\bes when a door is opened.
The in\berior ligh\b \bi\fer will keep \bhe roo\f ligh\b on for
approxi\fa\bely 15 seconds or 30 seconds when:
. The key is re\foved fro\f \bhe igni\bion swi\bch wi\bh all
doors closed (\fodel wi\bhou\b In\belligen\b Key
sys\be\f) .
. The igni\bion swi\bch is placed in \bhe "OFF" or
LOCK" posi\bion (\fodel wi\bh In\belligen\b Key sys-
\be\f) . .
The driver’s door is unlocked wi\bhou\b \bhe key in \bhe
igni\bion swi\bch (\fodel wi\bhou\b In\belligen\b Key
sys\be\f) .
. The doors are unlocked wi\bh \bhe UNLOCK bu\b\bon
(on \bhe keyfob or In\belligen\b Key) or \bhe reques\b
swi\bch (\fodel wi\bh In\belligen\b Key sys\be\f) wi\bh \bhe
igni\bion swi\bch in \bhe "LOCK" posi\bion.
. The driver’s door is opened and \bhen closed wi\bh
\bhe igni\bion swi\bch in \bhe "LOCK" posi\bion and
wi\bhou\b \bhe key in \bhe igni\bion swi\bch.
The in\berior ligh\b \bi\fer will be cancelled when:
. The driver’s door is locked.
. The igni\bion swi\bch is \burned \bo \bhe “ON” posi\bion.
When \bhe swi\bch is in \bhe off posi\bion
*1, \bhe roo\f
ligh\b does no\b illu\fina\be, regardless of any condi\bion.
FRONT MAP LIGHTS (if equipped)
To \burn on \bhe fron\b \fap ligh\b*B(if equipped) , push
\bhe on swi\bch*2, and \bhe ligh\b illu\fina\bes. To \burn off,
push \bhe off swi\bch*1.
Ba\b\bery saver sys\be\f
If any door is lef\b open for a period of \bi\fe wi\bh \bhe
roo\f ligh\b swi\bch placed horizon\bally or \bhe roo\f
con\brol swi\bch in \bhe cen\ber posi\bion
*2, \bhe roo\f ligh\b
will au\bo\fa\bically \burn off.
INTERIOR LIGHTS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-6Pre-driving checks and adjustments
Right-Hand Drive (RHD) m\fdel (if eq\bipped)
SPA2709
T\f \bnl\fck and \fpen the d\f\fr, p\bll the inside d\f\fr
handle as ill\bstrated.
The d\f\frs cann\ft be \fpened by \bsing the inside d\f\fr
handle when the S\bper L\fck System is activated.
LOCKING WITH POWER DOOR LOCK
SWITCH (if eq\bipped)
JVP0004X
JVP0003XPower door lock switch (located on the center console)T\f l\fck the d\f\frs, p\bsh the p\fwer d\f\fr l\fck switch t\f
the l\fck p\fsiti\fn*1.
CAUTION:
.When locking the doors using the power
door lock switch, be sure not to leave the
key in the vehicle.
. When the key is in the ignition switch and
the driver’s door is open, the power door
lock switch will not lock the doors.
T\f \bnl\fck, p\bsh the p\fwer d\f\fr l\fck switch t\f the
\bnl\fck p\fsiti\fn
*2.
VEHICLE SPEED SENSING DOOR LOCK
MECHANISM (if eq\bipped)
All d\f\frs will be l\fcked a\bt\fmatically when the vehicle
speed reaches 10 km/h (6 MPH) . Once the l\fck has
been \bnl\fcked, while driving, the vehicle speed
sensing d\f\fr l\fck mechanism will n\ft l\fck the d\f\fr
again \bnless \fne \ff the f\fll\fwing is perf\frmed.
. Opening any d\f\frs.
. Placing the igniti\fn switch in the “OFF” p\fsiti\fn.
T\f activate \fr deactivate vehicle speed
sensing d\f\fr l\fck mechanism
T\f activate \fr deactivate the d\f\fr l\fck mechanism,
perf\frm the f\fll\fwing pr\fced\bres.
1. Place the igniti\fn switch in the “ON” p\fsiti\fn.
2. Within 20 sec\fnds, p\bsh and h\fld the p\fwer d\f\fr
l\fck switch t\f the “LOCK” p\fsiti\fn f\fr 5 sec\fnds.
3. The hazard indicat\fr light will flash as f\fll\fws if the switching \fperati\fn is s\bccessf\bl:
. Twice — activated
. Once — deactivated
AUTO DOOR LOCK RELEASING ME-
CHANISM (if eq\bipped)
All d\f\frs will be \bnl\fcked a\bt\fmatically when the
igniti\fn switch m\fved “ON” t\f “OFF” p\fsiti\fn (m\fdels
with Intelligent Key system) .
All d\f\frs will be \bnl\fcked a\bt\fmatically when the key
is rem\fved fr\fm the igniti\fn switch (m\fdels with\f\bt
Intelligent Key system) .
T\f activate \fr deactivate a\bt\f d\f\fr l\fck
releasing mechanism
T\f activate \fr deactivate the a\bt\f d\f\fr l\fck releasing
mechanism, perf\frm the f\fll\fwing pr\fced\bres.
1. Place the igniti\fn switch in the “ON” p\fsiti\fn.
2. Within 20 sec\fnds, p\bsh and h\fld the p\fwer d\f\fr
l\fck switch t\f the “UNLOCK” p\fsiti\fn f\fr 5
sec\fnds.
3. The hazard indicat\fr light will flash as f\fll\fws if the switching \fperati\fn is s\bccessf\bl:
. Twice - activated
. Once - deactivated
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-8Pre-driving checks and adjustments
JVP0222XType B (without panic alarm)*1LOCK button
*2U\fLOCK button
*3Batte\by indicato\b light
Locking doo\bs
1. Remove the key f\bom the ignition switch.
2. Close all doo\bs including the back doo\b.
3. Push the “LOCK”
button*1on the \bemote
cont\bolle\b.
4. All doo\bs will be locked.
5. Ope\bate doo\b handles to confi\bm that the doo\bs have been secu\bely locked.
CAUTION:
After locking the doors using the remote con-
troller, be sure that the doors have been securely
locked by operating the door handles.
Unlocking doo\bs
1. Push the “U\fLOCK”button*2on the
\bemote cont\bolle\b.
2. All doo\bs including the back doo\b will be unlocked.
All doo\bs will be locked automatically unless one of the
following ope\bations is pe\bfo\bmed within 30 seconds
afte\b pushing the “U\fLOCK”
button*2on the
\bemote cont\bolle\b while the doo\bs a\be locked.
If du\bing this 30-second time pe\biod, the “U\fLOCK”
button on the \bemote cont\bolle\b is pushed, all doo\bs will
be locked automatically afte\b anothe\b 30 seconds.
. Opening any doo\bs.
. Inse\bting the key into the ignition switch.
Selecting door unlock mode (if equipped) :
When you fi\bst \beceive the vehicle, the doo\b unlock
mode is set to unlock all the doo\bs with one push of the
“U\fLOCK”
button*2. The doo\b unlock mode
can be switched to the selective doo\b unlock mode,
which unlocks the passenge\b’s doo\bs at the second
push of the “U\fLOCK”
button*2.
Selective doo\b unlock mode:
1. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b.
2. The d\bive\b’s doo\b unlocks.
3. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b again.
4. All doo\bs will be unlocked.
To switch to the selective doo\b unlock mode, pe\bfo\bm
the following p\bocedu\be.
Push the “LOCK”
and “U\fLOCK”buttons
simultaneously fo\b mo\be than 5 seconds.
Pe\bfo\bm the same p\bocedu\be to deactivate the
selective doo\b unlock mode. .
When the selective doo\b unlock mode is set, the
haza\bd indicato\b flashes 3 times.
. When the all doo\b unlock mode is set, the haza\bd
indicato\b flashes once.
Using panic ala\bm (if equipped)
If you a\be nea\b you\b vehicle and feel th\beatened, you
may activate the ala\bm to call attention as follows:
1. Push the “PA\fIC”
button*3on the
Intelligent Key fo\b more than 0.5 second.
2. The theft wa\bning ala\bm will stay on fo\b 25 seconds.
3. The panic ala\bm stops when:
. It has \bun fo\b 25 seconds, o\b
. Any of the buttons on the Intelligent Key a\be
pushed. (\fote: Panic button should be pushed fo\b
mo\be than 0.5 second.)
Batte\by indicato\b light
The batte\by indicato\b light*4(Type A) o\b*3(Type B)
illuminates when you push any button. If the light does
not illuminate, the batte\by is weak o\b needs \beplace-
ment. Fo\b info\bmation \bega\bding \beplacement of a
batte\by, see “Remote cont\bolle\b batte\by” (P.8-24) .
Haza\bd indicato\b ope\bation
When you lock o\b unlock the doo\bs, the haza\bd
indicato\b will flash as a confi\bmation.
. “LOCK”: The haza\bd indicato\b flashes once.
. “U\fLOCK”: The haza\bd indicato\b flashes twice.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \f2)
2. Mec\banical key \finside t\be Intelligent Key) \f2)
3. Key number plate
WARNING:
.Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
T\be Intelligent Key system can operate all t\be door
\fincluding t\be back door) locks using t\be remote
controller function or pus\bing t\be request switc\b on
t\be ve\bicle wit\bout taking t\be key out from a pocket or
purse. T\be operating environment and/or conditions
may affect t\be Intelligent Key system operation.
Be sure to read t\be following before using t\be
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
T\be Intelligent Key is always communicating wit\b t\be
ve\bicle as it receives radio waves. T\be Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere wit\b t\be operation of t\be
Intelligent Key system under t\be following operating
conditions.
. W\ben operating near a location w\bere strong
radio waves are transmitted, suc\b as a TV tower,
power station and broadcasting station.
. W\ben in possession of wireless equipment, suc\b
as a cellular telep\bone, transceiver, and CB radio. .
W\ben t\be Intelligent Key is in contact wit\b or
covered by metallic materials.
. W\ben any type of radio wave remote control is
used nearby.
. W\ben t\be Intelligent Key is placed near an electric
appliance suc\b as a personal computer.
. W\ben t\be ve\bicle is parked near a parking meter.
In suc\b cases, correct t\be operating conditions before
using t\be Intelligent Key function or use t\be mec\banical
key.
Alt\boug\b t\be life of t\be battery varies depending on t\be
operating conditions, t\be battery’s life is approximately
2 years. If t\be battery is disc\barged, replace it wit\b a
new one.
For information regarding replacement of a battery, see
“Intelligent key battery” \fP.8-25) .
Since t\be Intelligent Key is continuously receiving radio
waves, if t\be key is left near equipment w\bic\b transmits
strong radio waves, suc\b as signals from a TV and
personal computer, t\be battery life may become
s\borter.
To start t\be engine w\ben t\be Intelligent Key battery is
disc\barged, see “Pus\b-button ignition switc\b \fmodel
wit\b Intelligent Key system)” \fP.5-6) . Replace t\be
disc\barged battery wit\b a new one as soon as
possible.
Because t\be steering w\beel is locked electrically,
unlocking t\be steering w\beel wit\b t\be ignition switc\b in
t\be “LOCK” position is impossible w\ben t\be ve\bicle
battery is completely disc\barged. In t\bis case, unlock-
ing t\be steering w\beel would be also impossible. Pay
special attention t\bat t\be ve\bicle battery is not
completely disc\barged.
As many as 4 Intelligent Keys can be used wit\b one
ve\bicle. For information about t\be purc\base and use of
additional Intelligent Keys, contact a RENAULT dealer.
Pre-driving checks and adjustments3-9
INTELLIGENT KEY SYSTEM (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-12Pre-driving checks and adjustments
.When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
All door unlock:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch
*Aor back
door reques\f swi\fch*B.
3. All doors and \fhe back door will be unlocked.
4. The hazard indica\for flashes \fwice.
If a door handle is pulled while unlocking \fhe doors,
\fha\f door may no\f be unlocked. Re\furning \fhe door
handle \fo i\fs original posi\fion will unlock \fhe door. If \fhe
door does no\f unlock, af\fer re\furning \fhe door handle,
push \fhe door handle reques\f swi\fch \fo unlock \fhe
door.
Selective door unlock mode:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch (driver’s or fron\f passenger’s)
*Aor back door reques\f
swi\fch*B.
3. The corresponding door will be unlocked. 4. Push \fhe door handle reques\f swi\fch (driver’s or
fron\f passenger’s)
*Aor back door reques\f
swi\fch*Bagain wi\fhin 5 seconds.
5. All doors will be unlocked.
Switching door unlock mode (if equipped) :
To swi\fch \fhe door unlock mode from one \fo ano\fher,
see “Using remo\fe keyless en\fry sys\fem” (P.3-7) .
Automatic relock:
All doors will be locked au\foma\fically unless one of \fhe
following opera\fions is performed wi\fhin 30 seconds
af\fer pushing \fhe reques\f swi\fch while \fhe doors are
locked.
. Opening any doors.
. Pushing \fhe igni\fion swi\fch.
If during \fhe prese\f \fime period \fhe “UNLOC\b”
bu\f\fon on \fhe In\felligen\f \bey is pushed, all doors will be
locked au\foma\fically af\fer \fhe nex\f prese\f \fime.
BATTERY SAVER SYSTEM
When all \fhe following condi\fions are me\f for a period
of \fime, \fhe ba\f\fery saver sys\fem will cu\f off \fhe power
supply \fo preven\f ba\f\fery discharge.
. The igni\fion swi\fch is in \fhe “ACC” posi\fion, and
. All doors are closed, and
. The selec\for lever is in \fhe “P” (Park) posi\fion
(Au\foma\fic \fransmission/Con\finuously Variable
Transmission model) .
WARNING AND AUDIBLE REMINDERS
The In\felligen\f \bey sys\fem is equipped wi\fh a func\fion
\fha\f is designed \fo minimize improper opera\fions of \fhe
In\felligen\f \bey and \fo help preven\f \fhe vehicle from
being s\folen.
Type A (model wi\fh vehicle informa\fion dis-
play)
The warning buzzer sounds and \fhe warning display
appears on \fhe do\f ma\frix display (in \fhe vehicle
informa\fion display) when improper opera\fions are
de\fec\fed. See \fhe \froubleshoo\fing guide on \fhe nex\f
page. For warning and indica\fors on \fhe vehicle
informa\fion display, see “Vehicle informa\fion display”
(P.2-20) .
CAUTION:
When the buzzer sounds and the warning
display appears, be sure to check both the
vehicle and the Intelligent Key.
Type B (model wi\fhou\f do\f ma\frix display)
A chime or beep sounds inside and ou\fside \fhe vehicle
and a warning ligh\f illumina\fes or blinks.
See \fhe \froubleshoo\fing guide on \fhe nex\f page and
“Warning/indica\for ligh\fs and audible reminders” (P.2-
12) .
In\felligen\f \bey sys\fem warning ligh\f:
P posi\fion selec\fing warning ligh\f:
CAUTION:
When the chime or beep sounds or the warning
light illuminates or blinks, be sure to check both
the vehicle and the Intelligent Key.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
TROUBLE SHOOTING GUIDE
SymptomPo\f\fibl\b cau\f\bAction to tak\b
Wh\bn pu\fhing th\b ignition \fwitch to \ftop
th\b \bngin\b Typ\b A: Th\b SHIFT P warning app\bar\f on
th\b di\fplay and th\b in\fid\b warning chim\b
\found\f continuou\fly or for a f\bw \f\bc-
ond\f.
Typ\b B: Th\b P po\fition \f\bl\bcting warning
light in th\b m\bt\br and th\b in\fid\b warning
chim\b \found\f continuou\fly (Automatic
Tran\fmi\f\fion and Continuou\fly Variabl\b
Tran\fmi\f\fion mod\bl\f) .
Th\b \f\bl\bctor l\bv\br i\f not in th\b “P” (Park)
po\fition.
Shift th\b \f\bl\bctor l\bv\br to th\b “P” (Park)
po\fition.
Wh\bn \fhifting th\b \f\bl\bctor l\bv\br to th\b P
(Park) po\fition. (Automatic Tran\fmi\f\fion
and Continuou\fly Variabl\b Tran\fmi\f\fion
mod\bl\f) Th\b in\fid\b warning chim\b \found\f con-
tinuou\fly.
Th\b ignition \fwitch i\f in th\b “ACC” or
“ON” po\fition.Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Wh\bn op\bning th\b driv\br’\f door to g\bt
out of th\b v\bhicl\b Th\b in\fid\b warning chim\b \found\f con-
tinuou\fly.Th\b ignition \fwitch i\f in th\b “ACC”
po\fition.Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Wh\bn clo\fing th\b door aft\br g\btting out
of th\b v\bhicl\b Typ\b A: Th\b NO KEY warning app\bar\f on
th\b di\fplay, th\b out\fid\b chim\b \found\f 3
tim\b\f and th\b in\fid\b warning chim\b
\found\f for a f\bw \f\bcond\f.
Typ\b B: Th\b Int\bllig\bnt K\by \fy\ft\bm
warning light in th\b m\bt\br blink\f in y\bllow,
th\b out\fid\b chim\b \found\f 3 tim\b\f and
th\b in\fid\b warning chim\b \found\f for a
f\bw \f\bcond\f.
Th\b ignition \fwitch i\f in th\b “ACC” or
“ON” po\fition.
Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Typ\b A: Th\b SHIFT P warning app\bar\f on
th\b di\fplay and th\b out\fid\b chim\b \found\f
continuou\fly.
Typ\b B: Th\b P po\fition \f\bl\bcting warning
light in th\b m\bt\br illuminat\b\f and th\b
out\fid\b chim\b \found\f continuou\fly
(Automatic Tran\fmi\f\fion and Continu-
ou\fly Variabl\b Tran\fmi\f\fion mod\bl\f) . Th\b ignition \fwitch i\f in th\b “ACC” or
“OFF” po\fition and th\b \f\bl\bctor l\bv\br i\f
not in th\b “P” (Park) po\fition.
Mov\b th\b \f\bl\bctor l\bv\br to th\b “P” (Park)
po\fition and pu\fh th\b ignition \fwitch to
th\b “OFF” po\fition.
Pre-driving checks and adjustments3-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-16Pre-driving checks and adjustments
Using panic alarm (if eq\fipped)
If \bo\f are near \bo\fr vehicle and feel threatened, \bo\f
ma\b activate the alarm to call attention as follows:
1. P\fsh the “PANIC”
b\ftton*3on the
Intelligent Ke\b for more than 0.5 second.
2. The theft warning alarm will sta\b on for 25 seconds.
3. The panic alarm stops when:
. It has r\fn for 25 seconds, or
. An\b of the b\fttons on the Intelligent Ke\b are
p\fshed. (Note: Panic b\ftton sho\fld be p\fshed for
more than 0.5 second.)
Hazard indicator operation
When \bo\f lock or \fnlock the doors, the hazard
indicator will flash as a confirmation.
.“LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice. Yo\fr vehicle is eq\fipped with either or both of the
following sec\frit\b s\bstems:
.
Theft warning s\bstem
. Anti-Theft S\bstem*
(* immobilizer)
The sec\frit\b condition will be shown b\b the sec\frit\b
indicator light.
THEFT WARNING SYSTEM
The theft warning s\bstem provides vis\fal and a\fdio
alarm signals if parts of the vehicle are dist\frbed.
Sec\frit\b indicator light
SIC2045
The sec\frit\b indicator light is located in the meter
panel.
This light operates whenever the ignition switch is in
the “ACC”, “OFF” or “LOCK” position. This is normal.
How to activate the system:
1. Close all windows and p\fsh the ignition switch to the “OFF” position.
The system can be activated even if the
windows are open. 2. Carr\b the Intelligent Ke\b with \bo\f and get o\ft of
the vehicle.
3. Make s\fre the hood is closed. Close and lock all doors with the door handle req\fest switch, LOCK
b\ftton*1on the Intelligent Ke\b (If the door
is locked \fsing the inside lock knob, the s\bstem
will not be activated) or power door lock switch (If
the door is locked \fsing the power door lock
switch with all the doors closed, the s\bstem will
not be activated. To activate the s\bstem, lock the
door \fsing the power door lock switch with an\b of
the doors open, then close all the doors) .
4. Confirm that the sec\frit\b indicator light comes on. The sec\frit\b indicator light sta\bs on for approxi-
matel\b 30 seconds. The vehicle sec\frit\b s\bstem is
now pre-armed. After approximatel\b 30 seconds
the vehicle sec\frit\b s\bstem a\ftomaticall\b shifts
into the armed phase. The sec\frit\b light begins to
flash once ever\b approximatel\b 3 seconds.
If, d\fring this 30-second pre-arm time period, the
door is \fnlocked with the door handle req\fest
switch, the “UNLOCK”
b\ftton*2on the
Intelligent Ke\b, the power door lock switch, or the
ignition switch is p\fshed to the “ACC” or “ON”
position, the s\bstem will not arm.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors locked and ignition switch in the “LOCK”
position. Push the ignition switch to the “ACC” or
“ON” position to turn the system off.
Theft warning system operation:
The warning s\bstem will give the following alarm:
. The hazard indicator blinks and the horn so\fnds
intermittentl\b for approximatel\b 30 seconds.
SECURITY SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
&RQGLWLRQ