2012 RENAULT PULSE ignition


> (GLW    0RGHO .$2(0B5HQDXOW @
Low fuel warning light (if equipped)
\fhe low fuel warning light illuminates when the fuel
level in the tan\b is getting low. Refuel as soon as it is
convenient, before the fuel gauge reaches the empty
(0) position. \fhere will be a small reserve of fuel
remaining in the tan\b when the fuel gauge reaches the
empty (0) position.
Malfunction warning light (red) (diesel
engine model)
When the ignition switch is placed in the “ON”
position, the malfunction warning light illuminates in
red. \fhis means that the system is operational. After
starting the engine, the warning light turns off.
For the orange Malfunction Indicator Light (MIL) , see
“Malfunction Indicator Light (MIL)” (P.2-17)for details.
If the malfunction warning light (red) illuminates
continuously while the engine is running, it may
indicate an engine control system malfunction. Have
your vehicle inspected by a RENAUL\f dealer. You do
not need to have your vehicle towed to the dealer.
CAUTION:
Continuing vehicle operation without proper
servicing of the engine control system could
lead to poor driveability, reduced fuel economy,
and damage to the engine control system, which
may affect the vehicle’s warranty coverage.
Master warning light (if equipped)
When the ignition switch is in the “ON” position, the
master warning light illuminates if any of the following
are displayed on the vehicle information display.
. Seat belt warning
. NO KEY warning
. Low fuel warning
. Par\bing bra\be release warning
. Door/bac\b door open warning
(See “Vehicle information display” (P.2-20) .)
P position selecting warning light (if
equipped)
\fhe warning light blin\bs in red when the ignition switch
is pushed to stop the engine with the selector lever in
any position except the “P” (Par\b) position.
If this warning appears, move the selector lever to the
“P” (Par\b) position or push the ignition switch to the
“ON” position.
An inside warning chime will also sound.
See “Intelligent Key system” (P.3-9) .
Seat belt warning light (if equipped)
When the ignition switch is in the “ON” position, the
seat belt warning light illuminates. \fhe light will
continue to illuminate until the driver’s seat belt is
fastened. (See “Seat belts” (P.1-7) .) For China:
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b unless the driver’s seat belt is
securely fastened.
Except for China:
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b and the chime will sound unless the
driver’s seat belt is securely fastened. \fhe chime will
continue to sound for about 90 seconds until the seat
belt is fastened.
Supplemental Restraint System (SRS)
air bag warning light (if equipped)
When the ignition switch is in the “ON” or “S\fAR\f”
position, the Supplemental Restraint System (SRS) air
bag warning light illuminates for about 7 seconds and
then turns off. \fhis indicates that the SRS air bag
system is operational.
If any of the following conditions occur, the SRS air
bag system and/or pre-tensioner seat belt need
servicing. Have the system chec\bed, and if necessary
repaired, by a RENAUL\f dealer promptly.
. \fhe SRS air bag warning light remains illuminated
after about 7 seconds.
. \fhe SRS air bag warning light flashes intermit-
tently.
. \fhe SRS air bag warning light does not illuminate
at all.
Unless chec\bed and repaired, the SRS air bag system
and/or pre-tensioner seat belt may not function
properly. (See “Supplemental Restraint System
(SRS)” (P.1-25) .)
Instruments and controls2-15
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-16Instruments and controls
Water-in-fuel-filte\or warning light (for
\fiesel engine mo\fel)
\bf the water-in-fuel-filt\oer warning light illuminates while
the engine is running, \frain the water from the fuel filter
promptly. (See “Fuel filter (\fiesel engine mo\fel)” (P.8-
15) .)
CAUTION:
Continuing vehicle operation without properly
draining could cause serious damage to the
engine.
\bND\bCATOR L\bGHTS
Cruise control on in\ficator light (if
equippe\f)
The cruise control on in\ficator light in\ficates the
activation of the cruise control system.
When the cruise control main switch is turne\f on, the
in\ficator light will illuminate, in\ficating the cruise
control system is in the stan\fby mo\fe. (See “Cruise
control” (P.5-28) .)
Cruise control/spee\f limiter set in\fi-
cator light (if equippe\f)
The cruise control/spee\f limiter set in\ficator light
in\ficates the status of the cruise control system.
When the vehicle spee\f is controlle\f by the cruise
control/spee\f limiter system, the in\ficator light illumi-
nates.
\bf the cruise control/spee\f limiter set in\ficator light
blinks while the engine is running, or while \friving, it
may in\ficate the cruise control/spee\f limiter system is not functioning properly an\f may nee\f servicing. Have
the system checke\f, an\f if necessary repaire\f, by a
RENAULT \fealer promptly. (See “Cruise control” (P.5-
28) an\f “Spee\f limiter (if equippe\f for Europe)” (P.5-
26) .)
Electronic Stability Program (ESP) off
in\ficator light (if equippe\f)
The Electronic Stability Program (ESP) off in\ficator
light illuminates when the ESP off switch is pushe\f to
the “OFF” position.
When the ESP off switch is pushe\f to the “OFF”
position, the ESP system is turne\f off.
\bf the ESP off in\ficator light an\f slip in\ficator light
illuminate while the engine is running or while \friving, it
may in\ficate the ESP system is not functioning
properly an\f may nee\f servicing. Have the system
checke\f, an\f if necessary repaire\f, by a RENAULT
\fealer promptly. (See “Electronic Stability Program
(ESP) System (if equippe\f for Europe)” (P.5-25) .)
Front fog lights in\ficator light (if
equippe\f)
The front fog lights in\ficator light illuminates when the
front fog lights are on. (See “Fog light switch” (P.2-
32) .)
Front passenger air bag status light (if
equippe\f)
The front passenger air bag status light locate\f on the
instrument panel will illuminate when the front passen-
ger air bag is turne\f off with the front passenger air
bag switch. When the front passenger air bag is turne\f
on, the front passenger air bag status light will turn off. For more \fetails, see “Supplemental Restraint System
(SRS)” (P.1-25) .
Glow plug in\ficator light (\fiesel engine
mo\fel)
When the ignition switch is in the “ON” position, the
glow plug in\ficator light illuminates an\f turns off after
the glow plugs have warme\f up.
\bf the glow plugs have alrea\fy warme\f up, the glow
plug in\ficator flashes briefly an\f then turns off.
High beam in\ficator light
The high beam in\ficator light illuminates when the
hea\flight high beam is “ON”. The in\ficator turns off
when the low beam is selecte\f. (See “Hea\flight an\f
turn signal switch” (P.2-29) .)
Low temperature in\ficator light (green)
*
The low temperature in\ficator light illuminates when
the engine coolant temperature is low.
When the ignition switch is in the “ON” position, the
low temperature in\ficator light illuminates an\f then
turns off after the engine coolant has warme\f up.
\bf the low temperature in\ficator light stays illuminate\f
after the engine has sufficiently warme\f up, it may
in\ficate the low temperature sensor in the engine
coolant system is not functioning properly an\f may
nee\f servicing. Have the system checke\f, an\f if
necessary repaire\f, by a RENAULT \fealer promptly.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Malfunction Indicator Light (MIL)
Wh\fn th\f ignition switch is in th\f “\bN” position, th\f
Malfunction Indicator Light (MIL) illuminat\fs. Aft\fr
starting th\f \fngin\f, th\f MIL turns off. This indicat\fs
that th\f \fngin\f control syst\fm is op\frational.
If th\f MIL illuminat\fs or blinks (if \fquipp\fd) whil\f th\f
\fngin\f is running, it may indicat\f that th\f \fngin\f
control syst\fm is not functioning prop\frly and may
n\f\fd s\frvicing. Hav\f th\f syst\fm ch\fck\fd, and if
n\fc\fssary r\fpair\fd, by a RENAULT d\fal\fr promptly.
Malfunction Indicator Light (MIL) on steady:
An \fngin\f control syst\fm malfunction has b\f\fn
d\ft\fct\fd. Hav\f th\f v\fhicl\f ch\fck\fd, and if n\fc\fssary
r\fpair\fd, by a RENAULT d\fal\fr promptly. You do not
n\f\fd to hav\f your v\fhicl\f tow\fd to th\f d\fal\fr.
Malfunction Indicator Light (MIL) blinking (if
equipped):
An \fngin\f misfir\f has b\f\fn d\ft\fct\fd which may
damag\f th\f \fngin\f control syst\fm. Hav\f th\f v\fhicl\f
ch\fck\fd, and if n\fc\fssary r\fpair\fd, by a RENAULT
d\fal\fr promptly.
To r\fduc\f or avoid possibl\f damag\f to th\f \fngin\f
control syst\fm wh\fn th\f MIL illuminat\fs or blinks:
.Avoid driving at sp\f\fds abov\f 70 km/h (43 MPH) .
. Avoid sudd\fn acc\fl\fration or d\fc\fl\fration.
. Avoid going up st\f\fp uphill grad\fs.
. Avoid carrying or towing unn\fc\fssary loads.
CAUTION:
.Continuing vehicle operation without proper
servicing of the engine control system could
lead to poor driveability, reduced fuel econ-
omy, and damage to the engine control system, which may affect the vehicle’s
warranty coverage.
. Incorrect setting of the engine control sys-
tem may lead to non-compliance of local
and national emission laws and regulations.
\bv\frdriv\f off indicator light (if
\fquipp\fd)
Th\f ov\frdriv\f off indicator light illuminat\fs wh\fn th\f
ov\frdriv\f is turn\fd \bFF. (S\f\f “Driving with Automatic
Transmission (AT)” (P.5-11) for th\f us\f of th\f ov\frdriv\f
off switch.)
R\far fog light indicator light (if
\fquipp\fd)
Th\f r\far fog light indicator light illuminat\fs wh\fn th\f
r\far fog light is on. (S\f\f “Fog light switch” (P.2-32) .)
S\fcurity indicator light (if \fquipp\fd)
Th\f s\fcurity indicator light blinks wh\fn th\f ignition
switch is in th\f “L\bCK”, “\bFF” or “ACC” position. This
function indicat\fs th\f Anti-Th\fft Syst\fm* \fquipp\fd on
th\f v\fhicl\f is op\frational.
(* immobiliz\fr)
If Anti-Th\fft Syst\fm is malfunctioning, this light will
r\fmain on whil\f th\f ignition switch is in th\f “\bN”
position. (S\f\f “S\fcurity syst\fm” (P.3-16) for additional
information.)
Slip indicator light (if \fquipp\fd)
Wh\fn th\f ignition switch is in th\f “\bN” position, th\f
slip indicator light illuminat\fs and th\fn turns off. This
indicat\fs that th\f V\fhicl\f Dynamic Control (VDC)
syst\fm or El\fctronic Stability Program (ESP) syst\fm is
op\frational.
Th\f slip indicator light blinks wh\fn th\f VDC or ESP
syst\fm is op\frating.
Wh\fn th\f indicator light blinks whil\f driving, th\f driving
condition is slipp\fry and th\f v\fhicl\f’s traction limit is
about to b\f \fxc\f\fd\fd.
If th\f VDC or ESP off indicator light and slip indicator
light illuminat\f whil\f th\f \fngin\f is running or whil\f
driving, it may indicat\f that th\f VDC or ESP syst\fm is
not functioning prop\frly and may n\f\fd s\frvicing. Hav\f
th\f syst\fm ch\fck\fd, and if n\fc\fssary r\fpair\fd, by a
RENAULT d\fal\fr promptly. (S\f\f “V\fhicl\f Dynamic
Control (VDC) syst\fm (if \fquipp\fd \fxc\fpt for Europ\f)”
(P.5-24) or “El\fctronic Stability Program (ESP) Syst\fm
(if \fquipp\fd for Europ\f)” (P.5-25) .)
Sp\f\fd limit\fr indicator light (if
\fquipp\fd)
This light illuminat\fs wh\fn th\f sp\f\fd limit\fr main
switch is push\fd. Th\f light turns off wh\fn th\f main
switch is push\fd again. Wh\fn th\f sp\f\fd limit\fr main
switch indicator light illuminat\fs, th\f sp\f\fd limit\fr
syst\fm is op\frational. (S\f\f “Sp\f\fd limit\fr (if \fquipp\fd
for Europ\f)” (P.5-26) .)
Instruments and controls2-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-18Instruments and controls
SPORT mode indicator \fight (i\b
equipped)
The SPORT mode indicator \fight i\f\fuminates when the
SPORT mode is turned “ON”. (See “Driving with
Continuous\fy Variab\fe Transmission (CVT)” (P.5-14)
\bor the use o\b the SPORT mode switch.)
Stop/Start System indicator \fight (i\b
equipped \bor Europe)/Id\fing Stop System
indicator \fight (i\b equipped \bor Thai\fand)
Stop/Start System indicator light (if equipped
for Europe):
The Stop/Start System indicator \fight i\f\fuminates in the
meter when the Stop/Start System is activated.
The Stop/Start System indicator \fight b\finks at a high
speed, when the engine hood is open (\bor CVT mode\f) .
The Stop/Start System indicator \fight b\finks at a \fow
speed, when the Stop/Start System is ma\f\bunctioning.
NOTE:
. When the Stop/Start System indicator light
blinks at a high speed (twice approximately
every one second) (for CVT model):
—Be sure to close the engine hood. When
the engine hood is open the engine will
be in the normal stopped state. In this
case, restart the engine with the ignition
switch.
. When the Stop/Start System indicator light
blinks at a low speed (once approximately
every one second) , have the system
checked, and if necessary repaired, by a
RENAULT dealer promptly. Idling Stop System indicator light (if equipped
for Thailand):
The Id\fing Stop System indicator \fight i\f\fuminates in the
meter when the Id\fing Stop System is activated.
The Id\fing Stop System indicator \fight b\finks at a high
speed, when the driver’s door or the engine hood is
open.
The Id\fing Stop System indicator \fight b\finks at a \fow
speed, when the Id\fing Stop System is ma\f\bunctioning.
NOTE:
.
When the Idling Stop System indicator light
blinks at a high speed (twice approximately
every one second):
—Be sure to close the driver’s door.
— Be sure to close the engine hood. When
the engine hood is opened the engine
will be in the normal stopped state. In this
case, restart the engine with the ignition
switch.
. When the Idling Stop System indicator light
blinks at a low speed (once approximately
every two seconds) , have the system
checked, and if necessary repaired, by a
RENAULT dealer promptly.
Turn signa\fs/hazard indicator \fights
The turn signa\fs/hazard indicator \fights b\fink when the
turn signa\f switch \fever or hazard indicator \b\fasher
switch is “ON”. (See “Head\fight and turn signa\f switch”
(P.2-29) or “Hazard indicator \b\fasher switch” (P.2-36) .)
Vehic\fe Dynamic Contro\f (VDC) o\b\b
indicator \fight (i\b equipped)
Vehic\fe Dynamic Contro\f (VDC) o\b\b indicator \fight
i\f\fuminates when the VDC o\b\b switch is pushed to the
“OFF” position.
When the VDC o\b\b switch is pushed to the “OFF”
position, the VDC system is turned o\b\b.
I\b the VDC o\b\b indicator \fight and s\fip indicator \fight
i\f\fuminate whi\fe the engine is running or whi\fe driving, it
may indicate the VDC system is not \bunctioning
proper\fy and may need servicing. Have the system
checked, and i\b necessary repaired, by a RENAULT
dea\fer prompt\fy. (See “Vehic\fe Dynamic Contro\f (VDC)
system (i\b equipped except \bor Europe)” (P.5-24) .)
AUDIBLE REMINDERS
Brake pad wear warning
The disc brake pads have audib\fe wear warnings.
When a brake pad requires rep\facement, it wi\f\f make a
high pitched scraping sound when the vehic\fe is in
motion. This scraping sound wi\f\f \birst occur on\fy when
the brake peda\f is depressed. A\bter more wear o\b the
brake pad, the sound wi\f\f a\fways be heard even i\b the
brake peda\f is not depressed. Have the brakes
checked as soon as possib\fe i\b the wear warning
sound is heard.
Have the system checked, and i\b necessary repaired,
by a RENAULT dea\fer prompt\fy. (See “Brakes” (P.8-
17) .)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Intelligent Key buzzer (if equipped)
\fhe Intelligent Key buzzer sounds if \bny one of the
following improper oper\btions is found.
.\fhe ignition switch is not returned to the “LOCK”
position when locking the doors.
. \fhe Intelligent Key is left inside the vehicle when
locking the doors.
. Any doors \bre not closed securely when locking
the doors.
When the buzzer sounds, be sure to check both the
vehicle \bnd the Intelligent Key. (See “Intelligent Key
system” (P.3-9) .)
Key reminder chime
\fhe key reminder chime will sound if \bny of the
following oper\btions \bre detected:
Model with Intelligent Key system:
. \fhe driver’s door is opened while the ignition
switch is in the “ACC” position.
Model without Intelligent Key system:
. \fhe driver’s door is opened while the key is left in
the ignition switch \bnd the ignition switch is in the
“OFF” position.
Light reminder chime
\fhe light reminder chime will sound if the driver’s door
is opened while the he\bdlight switch is in theorposition \bnd the ignition switch is in the “ACC”,
“OFF” or “LOCK” position.
Be sure to turn the light switch to the “OFF” position
when you le\bve the vehicle.
P\brking br\bke reminder chime
\fhe p\brking br\bke reminder chime will sound if the
vehicle is driven \bt more th\bn 7 km/h (4 MPH) with the
p\brking br\bke \bpplied. Stop the vehicle \bnd rele\bse the
p\brking br\bke.
Se\bt belt w\brning chime (if equipped)
When the vehicle speed exceeds 15 km/h (9 MPH) ,
the chime will sound unless the driver’s se\bt belt is
securely f\bstened. \fhe chime will continue to sound for
\bbout 90 seconds until the se\bt belt is f\bstened.
Stop/St\brt System reminder buzzer (if
equipped for Europe)
\fhe Stop/St\brt System reminder buzzer will sound if
the engine hood is opened (for CV\f \bnd M\f models) or
the driver’s door is opened or the driver’s se\bt belt is
unf\bstened (for M\f models) while the Stop/St\brt
System is \bctiv\bted.
NOTE:
. Be sure to close the engine hood. When the
engine hood is open, the engine will be in
the normal stopped state. In this case,
restart the engine with the ignition switch
(for CVT and MT models) .
. Be sure to check that the driver’s seat belt is
fastened and the driver’s door is closed.
When the driver’s seat belt is unfastened or
the driver’s door is open, the engine will be
in the normal stopped state. In this case,
restart the engine with the ignition switch
(for MT model) .
Idling Stop System reminder buzzer (if
equipped for \fh\bil\bnd)
\fhe Idling Stop System reminder buzzer will sound if
the driver’s door or the engine hood is opened (for
CV\f \bnd M\f models) or the driver’s se\bt belt is
unf\bstened (for M\f models) while the Idling Stop
System is \bctiv\bted.
NOTE:
.Be sure to close the driver’s door.
. Be sure to close the engine hood. When the
engine hood is open, the engine will be in
the normal stopped state. In this case,
restart the engine with the ignition switch.
Instruments and controls2-19
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-20Instruments and controls
JVI0003X
The vehicle infor\fation di\bplay*1di\bplay\b the
warning\b and infor\fation.
INDICATORS FOR OPERATION
JVI0266X
1. Engine \btart operation indicator (AT/CVT
\fodel)
Thi\b indicator appear\b when the \belector lever i\b in the
“P” (Park) po\bition.
Thi\b indicator \fean\b that the engine will \btart by
pu\bhing the ignition \bwitch with the brake pedal
depre\b\bed. You can \btart the engine directly in any
po\bition.
2. Steering lock relea\be \falfunction indicator
Thi\b indicator appear\b when the \bteering wheel cannot
be relea\bed fro\f the “LOCK” po\bition.
If thi\b indicator appear\b, pu\bh the ignition \bwitch while
lightly turning the \bteering wheel right and left.
VEHICLE INFORMATION DISPLAY
(if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3. NO KEY warning
This warning appears in either \ff the f\fll\fwing
c\fn\biti\fns.
No key inside the vehicle:
The warning appears when the \b\f\fr is cl\fse\b with the
Intelligent Key left \futsi\be the vehicle an\b the igniti\fn
switch in the “ACC” \fr “ON” p\fsiti\fn. Make sure that
the Intelligent Key is insi\be the vehicle.
Unregistered Intelligent Key:
The warning appears when the igniti\fn switch is
pushe\b fr\fm the “LOCK” p\fsiti\fn an\b the Intelligent
Key cann\ft be rec\fgnize\b by the system. Y\fu cann\ft
start the engine with an unregistere\b key. Use the
registere\b Intelligent Key.
See “Intelligent Key system” (P.3-9) f\fr m\fre \betails.
4. SHIFT “P” warning (AT/CVT m\f\bel)
This warning appears when the igniti\fn switch is
pushe\b t\f st\fp the engine with the select\fr lever in any
p\fsiti\fn except the “P” (Park) p\fsiti\fn.
If this warning appears, m\fve the select\fr lever t\f the
“P” (Park) p\fsiti\fn \fr push the igniti\fn switch t\f the
“ON” p\fsiti\fn.
An insi\be warning chime will als\f s\fun\b. (See
“Intelligent Key system” (P.3-9) .)
5. “PUSH” warning (AT/CVT m\f\bel)
This warning appears when the select\fr lever is m\fve\b
t\f the “P” (Park) p\fsiti\fn with the igniti\fn switch in the
“ACC” p\fsiti\fn after the SHIFT “P” warning appears.
T\f push the igniti\fn switch t\f the “OFF” p\fsiti\fn,
perf\frm the f\fll\fwing pr\fce\bure:
SHIFT“P”warning ?(M\fve the select\fr lever t\f
“P”) ?PUSH warning ?(Push the igniti\fn switch ?
igniti\fn switch p\fsiti\fn is turne\b t\f “ON”) ?PUSH warning
?(Push the igniti\fn switch ?igniti\fn
switch p\fsiti\fn is turne\b t\f “OFF”)
6. Intelligent Key battery \bischarge in\bicat\fr
This in\bicat\fr appears when the Intelligent Key battery
is running \fut \ff p\fwer.
If this in\bicat\fr appears, replace the battery with a new
\fne. (See “Battery” (P.8-23) .)
7. Engine start \fperati\fn in\bicat\fr (Manual
Transmissi\fn m\f\bels)
This in\bicat\fr means that the engine will start by
pushing the igniti\fn switch with the clutch pe\bal
\bepresse\b.
8. Cruise c\fntr\fl in\bicat\fr (f\fr Eur\fpe)
The cruise main switch in\bicat\fr (CRUISE) is \bis-
playe\b when the cruise c\fntr\fl main switch is pushe\b.
When the main switch is pushe\b again, the CRUISE
in\bicat\fr \bisappears. When the CRUISE in\bicat\fr is
\bisplaye\b, the cruise c\fntr\fl system is \fperati\fnal.
The cruise c\fntr\fl set in\bicat\fr (SET) is \bisplaye\b
while the vehicle spee\b is c\fntr\flle\b by the cruise
c\fntr\fl system. If the SET in\bicat\fr blinks while the
engine is running, it may in\bicate that the cruise c\fntr\fl
system is n\ft functi\fning pr\fperly. Have the system
checke\b by a RENAULT \bealer.
F\fr m\fre \betails, see “Cruise c\fntr\fl” (P.5-28) .
9. Spee\b limiter in\bicat\fr (f\fr Eur\fpe)
The spee\b limiter main switch in\bicat\fr (LIMIT) is
\bisplaye\b when the spee\b limiter main switch is
pushe\b. When the main switch is pushe\b again, the
LIMIT in\bicat\fr \bisappears.
The spee\b limiter set in\bicat\fr (SET) is \bisplaye\b while
the spee\b limiter is activate\b.
F\fr m\fre \betails, see “Spee\b limiter (if equippe\b f\fr Eur\fpe)” (P.5-26) .
10. Mechanical Key LOCK warning (if
equippe\b f\fr Eur\fpe)
The warning appears when the igniti\fn switch is left in
the “ACC” \fr “OFF” p\fsiti\fn instea\b \ff c\fmpletely
being turne\b t\f the “LOCK” p\fsiti\fn.
If this warning appears, turn the igniti\fn switch t\f the
“LOCK” p\fsiti\fn.
When the igniti\fn switch is in the “ON” p\fsiti\fn, a
buzzer will s\fun\b twice an\b the Mechanical Key LOCK
warning sh\fws when the igniti\fn switch is turne\b t\f
the “ACC” \fr “OFF” p\fsiti\fn. This is t\f warn the \briver
that the igniti\fn switch is n\ft in the “LOCK” p\fsiti\fn.
Make sure the select\fr lever is in the “P” (Park)
p\fsiti\fn (f\fr CVT m\f\bel) \fr the shift lever is in the “N”
(Neutral) p\fsiti\fn (f\fr MT m\f\bel) an\b then turn the
igniti\fn switch t\f the “LOCK” p\fsiti\fn.
CAUTION:
.
The steering wheel can only be locked when
the ignition switch is in the “LOCK” position
(if equipped) . Make sure the ignition switch
is in the “LOCK” position before leaving the
vehicle.
. The mechanical key can only be removed at
the “LOCK” position. Make sure the ignition
switch is in the “LOCK” position before
removing the mechanical key.
See “Igniti\fn switch (m\f\bel with\fut intelligent Key
system)” (P.5-5) f\fr further \betails.
Instruments and controls2-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-22Instruments and controls
WARNINGS AND ALERTS
JVI0032X
1\f Par\bing bra\be release warning
This warning appears when the vehicle speed is above
7 \bm/h (4 MPH) and the par\bing bra\be is applied\f
2\f Low fuel warning
This warning appears when the fuel level in the tan\b is
getting low\f Refuel as soon as it is convenient, before
the fuel gauge reaches the empty (0) position\f
There is a small reserve of fuel remaining in the
tank when the fuel gauge reaches the empty (0)
position.
3\f Door/bac\b door open warning (ignition
switch is in the ON position)
This warning appears if any of the doors or the bac\b
door is open or not closed securely\f The vehicle icon
indicates which door is open on the display\f Ma\be sure
that all of the doors and the bac\b door are closed\f
4\f “Time to rest” indicator
This indicator appears when the set “time to rest”
indicator activates\f You can set the time for up to 6
hours\f (See “Trip computer (for Type C)” (P\f2-25) \f)
5\f Low outside temperature warning
This warning appears if the outside temperature is 38C
or below\f The warning can be set not to be displayed\f
(See “Trip computer (for Type C)” (P\f2-25) \f)
6\f Seat belt warning light
When the ignition switch is in the “ON” position, the
seat belt warning light illuminates\f The light will
continue to illuminate until the front seat belt is
fastened\f (See “Seat belts” (P\f1-7) \f)
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b and the chime will sound unless the
front seat belt is securely fastened\f The chime will
continue to sound for about 90 seconds until the seat
belt is fastened\f
7\f Small light indicator warning
The small light indicator warning illuminates when the
front clearance lights, instrument panel lights, rear
combination lights and license plate lights are on\f The
indicator warning turns off when the
is turned
off\f
&RQGLWLRQ