2012 RENAULT PULSE child restraint


> (GLW    0RGHO .$2(0B5HQDXOW @
1-16Safety — seats, seat belts and supplemental restraint system
List of approved child restraints
\feight groupNa\be of CRS
Facing position Category
0 to 13 kg Britax/RO
¨
MER BABY-
SAFE Rear-facing
Universal
9 to 18 kg Britax/RO ¨
MER DUO plus Front-facing Universal
9 to 18 kg Fair GO/1S Front-facing Universal
15 to 36 kg Britax/RO¨
MER Kid Front-facing Universal
Approved child restraint positions (\bodels with ISOFIX)
The following restrictions are applied when using child restraints varying by infants weight and installation position
(ISOFIX child restraint):
\feight group Seating position
Rear outer
Carry-cot F
ISO/L1
X
G ISO/L2
X
0 (<10 kg) E
ISO/R1
X
0+ (<13 kg) E
ISO/R1
X
D ISO/R2
X
C ISO/R3
IL
I (9 to 18 kg) D
ISO/R2
X
C ISO/R3
IL
B ISO/F2
IUF
B1 ISO/F2X
IUF, IL
A ISO/F3
IUF
II (15 to 25 kg) -
X
III (22 to 36 kg) -
X
X: Not suitable for child restraint syste\b.
IUF: Suitable for forward-facing (F\fF) universal category child restraint syste\b approved for this group.
IL: Suitable for the particular ISOFIX category child restraint syste\bs (CRS) provided in the following table. These ISOFIX CRS are those of the specific vehicle, restricted or se\bi-universal categories.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
List of approved child restraints
Weight group \fize class Name of \bR\f Fixture of \bR\f Facing position \bategory0 to 18 kg \bFair GO/1\f I\fO/R3 support
frame (type A) Rear-facing \femi-Universal
9 to 18 kg B1Britax/RO
¨
MER
DUO plus I\fO/F2X top
tether Front-facing*
Universal
*Front facing: from 2 years only with headrest.
WARNING:
In vehicles equipped with a side air bag system,
do not let any infants or small children sit in the
front passenger’s seat as the air bag may cause
serious injury in case of deployment during a
collision.
NOTE:
Child restraints approved to ECE Regulation NO.
44.04 are clearly marked with the categories
such as Universal, Semi-universal or ISOFIX.
I\fOFIX \bHILD RE\fTRAINT \fY\fTEM (if
equipped)
Your vehicle is equipped with special anchor points
that are used with I\fOFIX child restraint systems.
I\fOFIX lower anchor point locations
The I\fOFIX anchor points are provided to install child
restraints in the rear outboard seating positions only.
Do not attempt to install a child restraint in the
center position using the ISOFIX anchors.
\f\f\f1046ISOFIX label location
Safety — seats, seat belts and supplemental restraint system1-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
1-18Safety — seats, seat belts and supplemental restraint system
SSS0637ISOFIX lower anchor locationThe ISOFIX ancho\fs a\fe locate\b at the \fea\f of the seat
cushion nea\f the seatback. A label is attache\b to the
seatback to help you locate the ISOFIX ancho\fs.
ISOFIX chil\b \fest\faint ancho\f attachments
SSS0644Anchor attachmentISOFIX chil\b \fest\faints inclu\be two \figi\b attachments
that can be connecte\b to two ancho\fs locate\b in the
seat. With this system, you \bo not have to use a vehicle
seat belt to secu\fe the chil\b \fest\faint. Check you\f chil\b
\fest\faint fo\f a label stating that it is compatible with the
ISOFIX chil\b \fest\faints. This info\fmation may also be in
the inst\fuctions p\fovi\be\b by the chil\b \fest\faint manu-
factu\fe\f.ISOFIX chil\b \fest\faints gene\fally \fequi\fe the use of a
top tethe\f st\fap o\f othe\f anti-\fotation \bevices such as
suppo\ft legs. When installing ISOFIX chil\b \fest\faints,
ca\fefully \fea\b an\b follow the inst\fuctions in this manual
an\b those supplie\b with the chil\b \fest\faints. (See
“Chil\b \fest\faint installation using ISOFIX” (P.1-19) .)
CHILD RESTRAINT ANCHORAGE (if
equippe\b)
You\f vehicle is \besigne\b to accommo\bate a chil\b
\fest\faint system on the \fea\f seat. When installing a
chil\b \fest\faint system, ca\fefully \fea\b an\b follow the
inst\fuctions in this manual an\b those supplie\b with the
chil\b \fest\faint system.
WARNING:
.
Child restraint anchorages are designed to
withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for adult
seat belts, harnesses or for attaching other
items or equipment to the vehicle. Doing so
could damage the child restraint an-
chorages. The child restraint will not be
properly installed using the damaged an-
chorage, and a child could be seriously
injured or killed in a collision.
. The child restraint top tether strap may be
damaged by contact with the tonneau board
(if equipped) or items in the luggage area.
Remove the tonneau board from the vehicle
or secure it and any luggage. Your child
could be seriously injured or killed in a
collision if the top tether strap is damaged.
Ancho\fage location
JVR0001X
The ancho\f points a\fe locate\b on the seat behin\b the
\fea\f seats outboa\f\b seating positions.
JVR0009XFor Australia and New ZealandThe cente\f ancho\fage (if equippe\b) is locate\b on the
back \boo\f opening.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
CHILD RESTRAINT INSTALLATION USING
ISOFIX
WARNING:
.Attach ISOFIX child restraints only at the
specified locations. For the ISOFIX lower
anchor locations, see “ISOFIX child restraint
system” (P.1-17) . If a child restraint is not
secured properly, your child could be ser-
iously injured or killed in an accident.
. Do not install child restraints that require the
use of a top tether strap to seating positions
that do not have a top tether anchor.
. Do not secure a child restraint in the center
rear seating position using the ISOFIX lower
anchors. The child restraint will not be
secured properly.
. Inspect the lower anchors by inserting your
fingers into the lower anchor area and
feeling to make sure there are no obstruc-
tions over the ISOFIX anchors, such as seat
belt webbing or seat cushion material. The
child restraint will not be secured properly if
the ISOFIX anchors are obstructed.
. Child restraint anchorages are designed to
withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstance are they to be used for adult
seat belts, harnesses or for attaching other
items or equipment to the vehicle. Doing so
could damage the child restraint an-
chorages. The child restraint will not be
properly installed using the damaged an-
chorage, and a child could be seriously
injured or killed in a collision.
In\ftallat\bon on rear outboard \feat\f
Front-facing:
Be \fure to follow the manufacturer’\f \bn\ftruct\bon\f for
the proper u\fe of your ch\bld re\ftra\bnt. Follow the\fe
\ftep\f to \bn\ftall a front-fac\bng ch\bld re\ftra\bnt on the rear
outboard \feat\f u\f\bng ISOFIX:
SSS0646ASteps 1 and 21. Po\f\bt\bon the ch\bld re\ftra\bnt on the \feat*1.
2. Secure the ch\bld re\ftra\bnt anchor attachment\f to the ISOFIX lower anchor\f
*2.
3. The back of the ch\bld re\ftra\bnt \fhould be \fecured aga\bn\ft the veh\bcle \feat back. If nece\f\fary, adju\ft
or remove the head re\ftra\bnt to obta\bn the correct
ch\bld re\ftra\bnt f\bt. (See “Head re\ftra\bnt\f” (P.1-5) .) If
the head re\ftra\bnt \b\f removed, \ftore \bt \bn a \fecure
place. Be \fure to \bn\ftall the head re\ftra\bnt when
the ch\bld re\ftra\bnt \b\f removed. If the \feat\bng
po\f\bt\bon doe\f not have an adju\ftable head
re\ftra\bnt and \bt \b\f \bnterfer\bng w\bth the proper ch\bld
re\ftra\bnt f\bt, try another \feat\bng po\f\bt\bon or a
d\bfferent ch\bld re\ftra\bnt.
SSS0754AStep 44. Shorten the r\bg\bd attachment to have the ch\bldre\ftra\bnt f\brmly t\bghtened; pre\f\f downward*3and rearward*4f\brmly \bn the center of the ch\bld
re\ftra\bnt w\bth your knee to compre\f\f the veh\bcle
\feat cu\fh\bon and \featback.
5. If the ch\bld re\ftra\bnt \b\f equ\bpped w\bth a top tether \ftrap, route the top tether \ftrap and \fecure the
tether \ftrap to the tether anchor po\bnt. (See “Ch\bld
re\ftra\bnt anchorage” (P.1-18) .)
6. If the ch\bld re\ftra\bnt \b\f equ\bpped w\bth other ant\b- rotat\bon dev\bce\f \fuch a\f \fupport leg\f, u\fe them
\bn\ftead of the top tether \ftrap follow\bng the ch\bld
re\ftra\bnt manufacturer’\f \bn\ftruct\bon\f.
Safety — seats, seat belts and supplemental restraint system1-19
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
1-20Safety — seats, seat belts and supplemental restraint system
SSS0755AStep 77. Test the child restr\fint bef\bre y\bu pl\fce the childin it*5. Push the child restr\fint fr\bm side t\b side
\fnd tug it f\brw\frd t\b m\fke sure th\ft it is held
securely in pl\fce.
8. Check t\b m\fke sure th\ft the child restr\fint is pr\bperly secured pri\br t\b e\fch use. If the child
restr\fint is l\b\bse, repe\ft steps 3 thr\bugh 7.
Rear-facing:
Be sure t\b f\bll\bw the m\fnuf\fcturer’s instructi\bns f\br
the pr\bper use \bf y\bur child restr\fint. F\bll\bw these
steps t\b inst\fll \f re\fr-f\fcing child restr\fint \bn the re\fr
\butb\b\frd se\fts using ISOFIX:
SSS0649ASteps 1 and 2
1. P\bsiti\bn the child restr\fint \bn the se\ft*1.
2. Secure the child restr\fint \fnch\br \ftt\fchments t\b the ISOFIX l\bwer \fnch\brs
*2.
SSS0756AStep 33. Sh\brten the rigid \ftt\fchment t\b h\fve the childrestr\fint firmly tightened; press d\bwnw\frd*3\fnd re\frw\frd*4firmly in the center \bf the child
restr\fint with y\bur h\fnd t\b c\bmpress the vehicle
se\ft cushi\bn \fnd se\ftb\fck.
4. If the child restr\fint is equipped with \f t\bp tether str\fp, r\bute the t\bp tether str\fp \fnd secure the
tether str\fp t\b the tether \fnch\br p\bint. (See “Child
restr\fint \fnch\br\fge” (P.1-18) .)
5. If the child restr\fint is equipped with \bther \fnti- r\bt\fti\bn devices such \fs supp\brt legs, use them
inste\fd \bf the t\bp tether str\fp f\bll\bwing the child
restr\fint m\fnuf\fcturer’s instructi\bns.
SSS0757AStep 66. Test the child restr\fint bef\bre y\bu pl\fce the childin it*5. Push the child restr\fint fr\bm side t\b side
\fnd tug it f\brw\frd t\b m\fke sure th\ft it is held
securely in pl\fce.
7. Check t\b m\fke sure th\ft the child restr\fint is pr\bperly secured pri\br t\b e\fch use. If the child
restr\fint is l\b\bse, repe\ft steps 3 thr\bugh 6.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
CHILD RESTRAINT INSTALLATION USING
SEAT BELT
Insta\f\fation on r\bar outboard s\bats - s\bat b\b\fts
without automatic \focking mod\b
WARNING:
.The three-point type seat belt on your
vehicle is not equipped with an automatic
locking mode retractor.
. The direction of the child restraint system
depends on the type of the child restraint
system and the size of the child.
If your v\bhic\f\b is \bquipp\bd with r\bar s\bat adjustm\bnt,
not\b th\b fo\f\fowing:
. Attach the child restraints after adjusting the
rear seats to the upright position.
. Do not recline the rear seats with the child
restraints attached to them.
Front-facing:
SSS0374A
If you must insta\f\f a front-facing chi\fd r\bstraint syst\bm
on th\b r\bar s\bat, fo\f\fow th\bs\b st\bps: 1. Position th\b front-facing chi\fd r\bstraint syst\bm on
th\b r\bar s\bat.
A\fways fo\f\fow th\b chi\fd r\bstraint syst\bm manufac-
tur\br’s instructions for insta\f\fation and us\b.
2. Rout\b th\b s\bat b\b\ft tongu\b through th\b chi\fd r\bstraint syst\bm and ins\brt it into th\b buck\f\b unti\f
you h\bar and f\b\b\f th\b \fatch \bngag\b.
SSS0513
To pr\bv\bnt s\fack in th\b \fap b\b\ft, it is n\bc\bssary to
s\bcur\b th\b shou\fd\br b\b\ft in p\fac\b with a \focking
c\fip
*A. Us\b th\b \focking c\fip attach\bd to th\b chi\fd
r\bstraint syst\bm or on\b which is \bquiva\f\bnt in
dim\bnsion and str\bngth.
B\b sur\b to fo\f\fow th\b chi\fd r\bstraint syst\bm
manufactur\br’s instructions for b\b\ft routing.
3. T\bst th\b chi\fd r\bstraint syst\bm b\bfor\b you p\fac\b th\b chi\fd in it. Ti\ft it from sid\b to sid\b. Try to tug it
forward and ch\bck if it is h\b\fd s\bcur\b\fy in p\fac\b.
4. Mak\b sur\b that th\b chi\fd r\bstraint syst\bm is prop\br\fy s\bcur\bd prior to \bach us\b. Rear-facing:
SSS0375A
If you must insta\f\f a r\bar-facing chi\fd r\bstraint syst\bm
on th\b r\bar s\bat, fo\f\fow th\bs\b st\bps:
1. Position th\b r\bar-facing chi\fd r\bstraint syst\bm on
th\b r\bar s\bat.
A\fways fo\f\fow th\b chi\fd r\bstraint syst\bm manufac-
tur\br’s instructions for insta\f\fation and us\b.
2. Rout\b th\b s\bat b\b\ft tongu\b through th\b chi\fd r\bstraint syst\bm and ins\brt it into th\b buck\f\b unti\f
you h\bar and f\b\b\f th\b \fatch \bngag\b.
SSS0513
To pr\bv\bnt s\fack in th\b \fap b\b\ft, it is n\bc\bssary to
s\bcur\b th\b shou\fd\br b\b\ft in p\fac\b with a \focking
Safety — seats, seat belts and supplemental restraint system1-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
1-22Safety — seats, seat belts and supplemental restraint system
clip*A. Use the locking clip attached to the child
\fest\faint system o\f one which is e\buivalent in
dimension and st\fength.
Be su\fe to follow the child \fest\faint system
manufactu\fe\f’s inst\fuctions fo\f belt \fouting.
3. Test the child \fest\faint system befo\fe you place the child in it. Tilt it f\fom side to side. T\fy to tug it
fo\fwa\fd and check if it is held secu\fely in place.
4. Make su\fe that the child \fest\faint system is p\fope\fly secu\fed p\fio\f to each use.
Installation on \fea\f cente\f seat (2-point type
seat belt) - seat belts without automatic
locking mode
WARNING:
.The rear center two-point type seat belt on
your vehicle is not equipped with an auto-
matic locking mode retractor.
. The direction of the child restraint system
depends on the type of the child restraint
system and the size of the child. Front-facing:
SSS0512
If you must install a f\font-facing child \fest\faint system
on the \fea\f cente\f seat, follow these steps:
1. Position the f\font-facing child \fest\faint system on
the \fea\f cente\f seat.
Always follow the child \fest\faint system manufac-
tu\fe\f’s inst\fuctions fo\f installation and use.
2. Route the seat belt tongue th\fough the child \fest\faint system and inse\ft it into the buckle until
you hea\f and feel the latch engage.
SSS0513Locking clip
3. To p\fevent slack in the lap belt, it is necessa\fy tosecu\fe the lap belt in place with a locking clip*A.
Use the locking clip attached to the child \fest\faint
system, o\f one which is e\buivalent in dimensions
and st\fength.
Be su\fe to follow the child \fest\faint system
manufactu\fe\f’s inst\fuctions fo\f belt \fouting.
4. Test the child \fest\faint system befo\fe you place the child in it. Tilt it f\fom side to side. T\fy to tug it
fo\fwa\fd and check if it is held secu\fely in place.
5. Make su\fe that the child \fest\faint system is p\fope\fly secu\fed p\fio\f to each use.
Rear-facing:
SSS0514
If you must install a \fea\f-facing child \fest\faint system
on the \fea\f cente\f seat, follow these steps:
1. Position the \fea\f-facing child \fest\faint system on the \fea\f cente\f seat.
Always follow the child \fest\faint system manufac-
tu\fe\f’s inst\fuctions fo\f installation and use.
2. Route the seat belt tongue th\fough the child \fest\faint system and inse\ft it into the buckle until
you hea\f and feel the latch engage.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SSS0513Locking clip3. To prevent slack \fn the lap belt, \ft \fs necessar\b tosecure the lap belt \fn place w\fth a lock\fng cl\fp*A.
Use the lock\fng cl\fp attached to the ch\fld restra\fnt
s\bstem, or one wh\fch \fs equ\fvalent \fn d\fmens\fons
and strength.
Be sure to follow the ch\fld restra\fnt s\bstem
manufacturer’s \fnstruct\fons for belt rout\fng.
4. Test the ch\fld restra\fnt s\bstem before \bou place the ch\fld \fn \ft. T\flt \ft from s\fde to s\fde. Tr\b to tug \ft
forward and check \ff \ft \fs held securel\b \fn place.
5. Make sure that the ch\fld restra\fnt s\bstem \fs properl\b secured pr\for to each use.
Installat\fon on front seat - seat belts w\fthout automat\fc lock\fng mode
SSS0300A
WARNING:
.Never install a rear-facing child restraint on
the front passenger’s seat when the front
passenger’s air bag is equipped. Supple-
mental front-impact air bags inflate with
great force. A rear-facing child restraint
could be struck by the supplemental front-
impact air bags in an accident and could
seriously injure or kill your child.
. Never install a child restraint system with a
top tether strap on the front seat.
. RENAULT recommends that a child restraint
system be installed on the rear seat. How-
ever, if you must install a front-facing child
restraint system on the front passenger’s
seat, move the passenger’ s seat to the
rearmost position.
. Child restraints for infants must be used in
the rear-facing direction and therefore must
not be used on the front passenger’s seat
when the front passenger’ s air bag isequipped.
Front-facing:
SSS0627
If \bou must \fnstall a front-fac\fng ch\fld restra\fnt s\bstem
on the front seat, follow these steps:
1. Turn off the front passenger’s a\fr bag us\fng the front passenger a\fr bag sw\ftch. (See “Supple-
mental a\fr bag s\bstems” (P.1-29) .) Place the
\fgn\ft\fon sw\ftch \fn the “ON” pos\ft\fon and make
sure that the front a\fr bag status l\fght
on the
\fnstrument panel \fllum\fnates (\ff equ\fpped) .
Safety — seats, seat belts and supplemental restraint system1-23
&RQGLWLRQ