Page 18 of 302
16
Familiarisation
Seeing clearly
Lighting
Ring A
Ring B
Wipers
142
Control stalk A: windscreen wipers
2. Fast wipe. 1.Normal wipe.Int.Intermittent wipe.
0. Park.
AUTOAutomatic wiping. È Single wipe: Brief pull on the stalk
towards.
Screenwash: Long pull on stalk towards you.
151
Switching on "AUTO" mode
)Briefly push the stalk downwards. )Briefly push the stalk downwards or place
the stalk in another position: Int, 1 or 2.
Ring B: rear wiper
15 3
152 Li
ghting off.
Automatic illumination o
f headlamps.
Sidelamps.
Dipped/main beam headlamps.
Rear
foglamps.
Park.
Intermittent wipe.
Screenwash.
Page 22 of 302
20
Familiarisation
Driving safely
Starting the HYbrid4 system
25
- Inser t the electronic key in the switch or if the vehicle is fitted with Keyless Entry and Starting, keep the electronic key in the
vehicle.
- Ensure that the gear lever is in position N.
- The instrument panel and the Ready
lampcome on.
- The dial in the centre console is in AUTO
m
ode.
Moving off
- While maintaining pressure on the brake pedal, move the gear lever to position A
to go forwards, or Rfor reverse.
- Ta k e y o u r foot off the brake pedal; you cannow move off.
- The parking brake is released automatically as you move off.
- Press the brake pedal
firmly.
- Pr
ess the STA R T/STOP
button or turn
the key fully towards the dashboard to
position 3 (Start), to initiate star t-up of the
hybrid system.
Page 27 of 302
.
25
!
Hybrid system
Starting your vehicle and moving off
- Inser t the electronic key in the switch,
or if your vehicle has Keyless Entry and Starting, keep the electronic key in the
vehicle.
-
Ensure that the gear lever is in position N.
- Press firmly on the brake pedal.
- With the brake still applied, move the
gear
lever to position A to go for wards or R(bylifting the lever slightly) for reverse.
- Lift your foot off the brake pedal, you canmove off.
- The parking brake is released automatically
as
you move off.
- Pr
ess the START/STOP
button or turn
the key fully towards the dashboard to
position 3(Starting), to star t the hybrid system.
-
The instrument panel and the Readylamp light up. The power graduation is displayed progressively, indicating that the
hybrid system is active, confirmed by
a messa
ge in the screen; the dial in the centre console is in AUTO
mode (default
mode for star ting).
- The hybrid system determines whether it is
necessary to star t the Diesel engine.
When your vehicle vehicle moves off in electric mode, it makes no noise. Be very careful of pedestrians as they will not hear you coming.
Page 29 of 302
.
27
!
Hybrid system
Ignition on without starting
the engine
(accessory position)
Anti-theft protection
Electronic engine immobiliser
The keys contain an electronic chip which hasa secret code. When the ignition is switched
on, this code must be recognised in order for
starting to be possible.
This electronic engine immobiliser locks
the en
gine management system a few minutesafter the ignition is switched off and prevents
starting of the engine by anyone who does not have the key.
In the event of a malfunction, you are informed by a message in the instrument panel screen.In this case, your vehicle does not start; contacta PEUGEOT dealer as soon as possible.
Turn the ke
y towards the dashboard to the
intermediate position or with the Keyless Entry
and Star ting key inside the vehicle, press the
"START/STOP" button, with no action on the pedal. This switches on the ignition and so
activates the ancillary equipment.
)Press the "START/STOP" button,
the instrument panel comes on
but the en
gine does not star t. )Press the button again to switchoff the ignition and so allow the
vehicle to be locked.
Using the ancillaries for a long periodintroduces the risk of a flat battery.
Page 39 of 302
.
37
Hybrid system
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your
gearbox
Use automatic mode Aas much as possible as this optimises gear changes to suit the
circumstances.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than the brake pedal, and press the accelerator progressively. These practices contribute towards a reduction in fuel consumption and CO2 emissions and also helps reduce thebackground traffic noise.
If your vehicle has cruise control, make use of the system at speeds above 25 mph (40 km/h) when the traffic is flowing well.
Control the use of your
electrical equipment
Before moving off, if the passenger compartment is too warm, ventilate it byopening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windowsand leave the air vents open. Remember to make use of equipment that canhelp keep the temperature in the passenger compartment down (sun roof and window blinds...).Switch off the air conditioning, unless it has automatic digital regulation, as soon as the desired temperature is attained.Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and front foglampswhen the level of light does not require their use.
Avoid running the Diesel engine when stationary, par ticularly in winter; your vehiclewill warm up much faster while driving.
As a passenger, if you avoid connecting your multimedia devices (film, music, video game...), you will contribute towards limitingthe consumption of electrical energy, and soof fuel.
Disconnect your por table devices beforeleaving the vehicle.
Page 46 of 302
44
i
Hybrid system
Vehicle recovery
Before doing any work, with the ignition on, press the brake pedal and put the gear lever inposition N
, then switch off the hybrid system.
The
front or rear wheels must not be on the ground, use a flat-bed lorry or trailer to recover the
vehicle.
Use the towing eyes only to pull a vehicle out or to pull it onto a flat-bed.
If necessary because access to the vehicle is difficult, it can be moveda few dozen metres at a speed notexceeding 6 mph (10 km/h).
Page 49 of 302
1
47
i
Instruments and controls
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation.
Warning/indicator lampStateCauseAction/Observations
Left-hand direction indicator
flashing with buzzer. The lighting stalk is pushed down.
Right-handdirection indicator flashing with buzzer.The lighting stalk is pushed up.
Sidelamps
fixed. The lighting stalk is in the
"Sidelamps" position.
Dipped beamheadlamps fixed. The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam headlamps
fixed. The lighting stalk is pulled towardsyou. Pull the stalk to return to dipped beam headlamps.
Ready
fixed. The vehicle is ready to move off; you can press the accelerator. It comes on once high voltage is established in the
vehicle.
Rear foglamps
fixed. The rear foglamps are switched on. Turn the ring on the stalk rear wards to switch off the
rear foglamps.
For more information on the lighting controls, refer to the "Visibility" section.
Page 70 of 302
68
i
!
i
i
Access
As a safety measure (children on board), never leave the vehicle without taking your key, even for a shor t period.
Guard against theft when the electronickey is in the defined zone with thevehicle unlocked.
Locking is confirmed by fixedlighting of the direction indicators for approximately two seconds. According to version, the door mirrors fold at the same time.
It is not possible to lock the vehicle if an electronic key is left inside the vehicleor if the ignition is on.
If one of the doors or the boot is stillopen or if an electronic key has been left inside the vehicle, the centrallocking does not take place.
When the vehicle is locked, if it isunlocked inadvertently, it will relock automatically after about thir ty seconds unless a door is opened.
The folding and unfolding of the door mirrors by the remote control can be deactivated by a PEUGEOT dealer.
Locking the vehicle
Normal locking
Using the key
)Turn the key towards the rear of the vehicle
to lock the vehicle completely.
Using the remote control
)Press the closed padlock to lock
the vehicle completely.
Using the electronic key
)
With the electronic key in the defined zone,
press with a finger on the door handle(at the markings) to lock the vehicle. ) From the boot, with the electronic key in
the defined zone, press a button to lock the
v
ehicle.
Maintaining the locking action (remotecontrol or manual key) automaticallycloses the windows and sunroof.
