2012 PEUGEOT 4008 ECO mode

270
08BLUETOOTH® STREAMING - TELEPHONE®
Enter the number using the keypad.


A.
Erasing a number one at a time.B.
Return to the previous screen. C.
To display the list of contacts (in theD. Bluetooth telephone or the vehicle).
Select a contact in the list.
To start [Dial] or start again [Redial] aE. telephone call
To display the secondary menu:F.
Is displayed if the personal identifi cationF1. number has not been defi ned.
Press to enter it.
Is displayed if the personal identifi cationF2. number has been defi ned.
To display the list of matched telephones. F3.
To display the list of voice commands.F4.
To reset all settings.
F5.
INFORMATION DISPLAYED IN TELEPHONE MODE
Refer to the section "matching a
telephone" to connect your telephone
by Bluetooth® .
AB
FCDEF1F2F4F3F5

273
09
2
3
1
4
5
6
7
BLUETOOTH® TELEPHONE®














TRAINING THE USER'S VOICE
You can use the user voice training function to create a voice model
for one person per language.
The characteristics o
f your voice and your pronunciation are savedin this model to provide the best voice recognition.
The vehicle must be stationar
y with the parking brake applied.
Switch off your telephone during the operation to avoid any
interruption.

Pr
ess this button.
The s
ystem says the fi rst of 45 standard phrases.

Sa
y " Word training".
When you are ready to start, press and hold this button.

Repeat each o
f the phrases in the table on the following page.
The s
ystem saves your voice and moves on to the next command.
Continue the process until all of the phrases have been
saved.

An explanation messa
ge is given.
After pla
ying all the voice commands, the system says "The word enrolment is complete" and ends the process.

I
f you do not start the programming process within approximately 3 minutes after pressing the SPEAK button, the process is cancelled.
I
f you press the SPEAK button within 5 seconds of the play of a
voice command, this command is saved again.

283
AUDIO-CD System

The system is protected in such a way that it will onlyoperate in your vehicle.

01 First steps - Control panel


For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is stationary.
When the en
gine is switched off and to prevent
discharging of the battery, the system switches off following the activation of the energy economy mode.



CONTENTS

02 Steering mounted controls

03 General operation

04 Radio

05 Music media players

06 USB player

07 BLUETOOTH
®
streaming

08 BLUETOOTH
®
telephone

Error messages p.
p.
p.
p.
p.
p.
p.
p.
p. 284
286
287
291
297
305
307
309
320

286
02 STEERING MOUNTED CONTROLS

SPEAK
Press this button to activate voice reco
gnition (" Listening
" is displayed).
Durin
g voice recognition, press this button briefl y to pause voice recognition.
Make a lon
g press on this button to end voice recognition.
Press this button briefl
y to activate voice recognition, even during a call.

Increase / reduce audio volume.

START CALL
Press this button to answer an incomin
g call.
If th
ere is a 2 nd
incoming call, press toput the 1 st
call on hold and speak to the 2nd
caller.
In this case, press brie
fl y to switch from one caller to the other.
To start a three-way conversation, press
SPEAK to change to voice recognitionmode and say " Incorporate the call
".
END
CALL
Press this button to re
ject an incoming call.
During a conversation, press this button to end a call.
Search for a higher / lower radio frequency.
Next /
previous CD track.
CD fast forwards / backwards.

Lon
g press: audio system on / off.

Short press: selection of the source in thefollowing order: FM1 / FM2 / FM3 / MW /
LW / CD.

287
1
1
1
11
03GENERAL OPERATION

Press the "PWR" button.
Th
e last source selected beforeswitching off resumes operation.
The audio equipment functions can be
used when the ignition switch is in the "ON" or "ACC" position.
To switch o
ff, press the "PWR" button
again.

ADJU
STING THE VOLUME

SETTING THE AUDIO MODES

Press the "
SOUND" button several
times; the audio modes change in the following order:

SUB PUNCH / TYPE / FIELD / BASS / MID / TREBLE / FADER / BALANCE / OFF.
Turn the "V
OL" dial respectively to the
left to decrease the volume or to theright to increase it. To access the personalised sound
functions quickl
y, press and hold
this button, then turn it to reach the
personalised sound setting of your choice.
Release the button to store thesetting. QUICK ACCESS MODE SWITCHING ON / OFF

The audio settin
g mode is deactivated when the radio is operated or a CD is played or after approximately 10 seconds without anyaction.I
f you press this button for more than2 seconds in the audio setting mode,
the system switches to "Hold" mode.
The audio mode selected will be
retained until you press this button again for more than 2 seconds. "HOLD" MODE

290
03
1
1
GENERAL OPERATION
This permits automatic adjustment of the "VOLUME", "BASS","MID" and "TREBLE" settings in relation to the vehicle speed.
"
SCV" AUTOMATIC VOLUME ADJUSTMENT
Turn the "
SOUND" dial to set the
volume of the bass unit.
Only vehicles fi tted with the "PremiumSound" system can offer the "SUB
PUNCH" setting. "SUB PUNCH" BASE UNIT VOLUME SETTING
If the "SUB PUNCH" is chan
ged, the sound cuts out briefl y.
Pr
ess the "SOUND" button for morethan two seconds to gain access to
the functions setting mode.
Then,
press this same button several
times; the functions setting mode changes in the following order:
AF
/ CT / REG / TP-S / PTY (languages) / SCV / PHONE / OFF.
Turn the "
SOUND" dial respectively to
the left to deactivate the function or to
the right to activate it.

293
04
1
RADIO

The "Radio Data System" (RDS) function on the FM waveband permits:


- access to the displa
y of information, such as the name of the station, ...

- listenin
g to the same station while travelling through different regions,

- temporar
y tuning to traffi c information announcements.
Most FM stations use RD
S. These stations transmit non-audible
data in addition to their programmes.
The data transmitted in this wa
y allows you access to various
functions, mainly displaying of the name of the station, automatic
retuning to alternative frequencies or temporary retuning to traffi c
information announcements.
RD
S allows you to continue listening to the same station by meansof alternative frequencies that carry the same station. However,
in certain conditions, RDS alternative frequencies may not beprovided throughout the country. Radio stations do not cover thewhole country, which explains the loss of reception of the station
during a journey. "AF" ALTERNATIVE FREQUENCIES
Your radio automaticall
y checks and selects the best frequency for
the radio station to which it is tuned (if the station broadcasts onseveral transmitters or frequencies).
The frequenc
y of a radio station covers approximately 30 miles (50 km). The change from one frequency to another explains the
temporary loss of reception during a journey.
If the station to which
you are listening does not have severalfrequencies in the region in which you are currently located, you can
deactivate alternative frequencies.
Some stations are or
ganised in a network.
In different re
gions, they broadcast different or shared programmes
depending on the time of day.
Y
ou can follow:
- a regional station only,
- the entire network, with the possibilit
y that you will be listening
to a different programme.
REG REGIONAL MODE

On long distance journeys, when the stored station becomes weak,
the radio searches fi rst for another frequency for the same station (AF). Then, if this fails, it searches for a frequency broadcasting the regional programme (REG). If this also fails, the radio returns to thestored station.
The "AF", "REG" and "TP" functions
can be deactivated or activated via the"TUNE" button functions setting mode.



















RDS

296
04
11
RADIO

CHANGING THE DISPLAY LANGUAGE OFTHE "PTY" PROGRAMME
Press the "TUNE" button
for more than
two seconds to access the functions setting mode.
Then,
press this button several times
in succession; the functions setting
mode changes in the following order:
AF
/ CT / REG / TP-S / PTY (languages) / SCV / PHONE / OFF.
Turn the "TUNE" dial to the le
ft or
to the right to select the language(ENGLISH, FRANCAIS, DEUTSCH,SVENSK, ESPAGNOL, ITALIANO). FUNCTIONS SETTING MODE

This
permits activation or deactivationof the functions below.
Press the "T
UNE" button for more than
two seconds to access the functionssetting mode.
Then, press this button several times
in succession; the
functions setting
mode changes in the following order:
AF
/ CT / REG / TO-S / PTY (languages) / SCV / PHONE / OFF.

Turn the "TUNE" dial respectivelyto the left to deactivate the function("OFF") or to the right to activate it("ON").

The "PH
ONE" is not operational at present.
The
functions setting mode is deactivated after approximately10 seconds without any action.