Page 219 of 442
3-70 Features and controls
3
NOTEIf the energy level gauge shows 0 bars during use of the
air conditioning, the cooling or heating may stop opera-
tion and the mode is changed to fan only.
If the energy level gauge shows 0 bars, the power down
warning light is illuminated to control the output.
If the energy level gauge shows 2 bars while the main
drive lithium-ion battery is being charged, the warning
indicator flashes. If the energy level gauge shows 1 bar
while the main drive lithium-ion battery is being charged,
the warning indicator and the charging bars flash alter-
nately.
BK0140800US.book 70 ページ 2011年9月29日 木曜日 午後3時28分
Page 224 of 442

Features and controls
3-75
3
Electric motor unit warning light
N00573600029
This warning light will illuminate when there is a problem with
a high voltage component.
Refer to “Service precautions” on page 7-2.Power down warning light
N00573700020
If the warning light illuminates when the outside air tempera-
ture is very low, move the vehicle to a warmer location.
If the warning light illuminates after the vehicle has been
driven continuously uphill or when the outside air temperature
is very high, stop the vehicle in a safe place so the electric
motor unit and/or the main drive lithium-ion battery can cool
down. When they have cooled down, the warning light will go
off. If the warning light does not turn off, contact a certified i-
MiEV dealer.NOTEWhen the power down warning light illuminates, avoid
rapid starts and aggressive acceleration.
Illumination of the power down warning light does not
indicate a malfunction.
If the power down warning light illuminates while the air
conditioning is used, the cooling or heating may stop
operating and only the fan will operate.
CAUTION
!If this light illuminates while driving, immediately
park your vehicle in a safe place and contact a certi-
fied i-MiEV dealer.
If this warning light illuminates, the power pro-
vided by the electric motor will be reduced and the
vehicle will be only able to move at low speeds.
This warning light will illuminate;
When the energy level in the main drive lith-
ium-ion battery is near empty.
When temperature of the electric motor unit
or the main drive lithium-ion battery is too
high or too low.
When voltage of the main drive lithium-ion
battery becomes low.
If the energy level gauge shows 0 bar, the main
drive lithium-ion battery is near empty and must
be charged as soon as possible. Refer to “Charg-
ing” on page 1-15.
BK0140800US.book 75 ページ 2011年9月29日 木曜日 午後3時28分
Page 283 of 442

4-2 Driving safety
4Economical driving
N00628500029
For economical driving, there are some technical requirements
that have to be met. In order to achieve longer life of the vehi-
cle and the most economical operation, we recommend you to
have the vehicle checked at regular intervals according to the
“WARRANTY AND MAINTENANCE MANUAL”.Starting and accelerationAvoid driving with the accelerator pedal fully depressed, such
as for unnecessarily sudden starts, acceleration and decelera-
tion. Smoothly depress the accelerator pedal.
Observe the speed limit and keep the speed as constant as pos-
sible while driving.IdlingParking for a long period with the ready indicator illuminated
will shorten the cruising range.SpeedAt higher the vehicle speed the more main drive lithium-ion
battery is consumed. Avoid driving at full speed. Even a slight
release of the accelerator pedal will save a significant amount
of main drive lithium-ion battery charge.Tire inflation pressureCheck the tire inflation pressures at regular intervals Low tire
inflation pressure increases road resistance. In addition, low
tire pressures adversely affect tire wear and driving stability.Cargo loadsDo not drive with unnecessary articles in the luggage compart-
ment.
Air conditioningToo much cooling/heating can affect the cruising range, so
maintain an appropriate temperature to extend the cruising
range.
BK0140800US.book 2 ページ 2011年9月29日 木曜日 午後3時28分
Page 296 of 442

5
Comfort controls
Vents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 2
Air conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 6
Important air conditioning operating tips . . . . . . .5- 17
Air purifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 18
Remote Climate Control (if so equipped) . . . . . . .5- 18
AM/FM electronically tuned radio with
CD player (if so equipped) . . . . . . . . . . . . . . . . .5- 18
To play iPod/USB memory device tracks via
voice operation (vehicles with Bluetooth
® 2.0
interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 30
Steering wheel audio remote control switch
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . .5- 34
Error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 37
Handling of compact discs . . . . . . . . . . . . . . . . . . .5- 38
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 40
Clock (if so equipped) . . . . . . . . . . . . . . . . . . . . . .5- 41
General information about your radio . . . . . . . . . .5- 42
BK0140800US.book 1 ページ 2011年9月29日 木曜日 午後3時28分
Page 297 of 442
5-2 Comfort controls
5Ve n t s
N00729900265
NOTEDo not place beverages on top of the instrument panel. If
they splash into the air conditioning vents, they could
damage the system.
Air flow and direction adjustments
N00730200314
Center ventsAdjust the direction of the air flow by moving the knob (A) and
vent.
1- Center vents
2- Side vents
1- Left-right adjustment
2- Up-down adjustment
BK0140800US.book 2 ページ 2011年9月29日 木曜日 午後3時28分
Page 298 of 442
Comfort controls
5-3
5
Side ventsWhen the dimple (A) is pressed, the vent opens.
To close the vent, press the dimple (B) on the opposite side.NOTEOn rare occasions, air from the vents of an air-conditioned
vehicle may be foggy. This is only moist air cooling sud-
denly and does not indicate a problem.
Do not let drinks or other liquids get into the vents as they
could prevent the air conditioning from operating nor-
mally.
Changing the mode selection
N00736400581
To change the position and amount of air flowing from the
vents, turn the mode selection dial. Refer to “Mode selection
dial” on page 5-8.
These symbols are used in the next several illustrations to dem-
onstrate the quantity of air coming from the vents.
: Small amount of air from the vents
: Large amount of air from the vents Face position Air flows only to the upper part of the passenger compartment.
BK0140800US.book 3 ページ 2011年9月29日 木曜日 午後3時28分
Page 301 of 442
5-6 Comfort controls
5Air conditioning
N00730300328
The air conditioning can only be used when the ready indicator
is illuminated.NOTEIf the energy level gauge is at 0 bars or the power down
warning light illuminates, the vehicle interior may not be
cooled/heated even though the dial or switch is operated.
Furthermore, the defog performance may be also reduced.
Refer to “Energy level gauge” on page 3-69.
Refer to “Power down warning light” on page 3-75.
Control panel
N00730500290
A- Temperature control dial
B- MAX switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F- Air selection switch
BK0140800US.book 6 ページ 2011年9月29日 木曜日 午後3時28分
Page 303 of 442

5-8 Comfort controls
5
Temperature control dial
N00736600235
Use this dial to adjust the temperature of the air flow from the
vents.
Turn the temperature control dial clockwise to make the air
warmer. Turn it counterclockwise to make the air cooler.
When the dial is set to middle () position, only uncooled and
unheated air will flow.
When the dial is moved to middle () position when using
cooling or heating, cooling or heating stops.NOTEWhen the dial is moved from middle () position to the
left while the air conditioning is not operating, the air tem-
perature will not change.
When the dial is moved to middle () position and then to
the left while the air conditioning is operating, the air con-
ditioning system is operating again.When the temperature control dial is set to “C” position,
the air selection will be automatically set to the
recirculation position and the air conditioning will oper-
ate.
When the dial is moved thereafter, the air conditioning
continues to operate and the air selection setting returns to
the setting before the dial was set to “C” position.
Mode selection dial
N00736700210
To change the position and amount of air flowing from the
vents, turn the mode selection dial. Refer to “Changing the
mode selection” on page 5-3.
BK0140800US.book 8 ページ 2011年9月29日 木曜日 午後3時28分