Page 8 of 20

6
 Extending Your Driving Range
Seat Heater Switch
What Happens in Extreme Heat and Cold Conditions:
Use of Climate Control - while the Mitsubishi i is plugged in to a level 1 or 2 charger, use your MiEV Remote to 
pre-heat, pre-cool, or defrost the cabin as much as possible. This will draw power from the outlet rather than 
pulling energy from the main Mitsubishi i battery. 
Use the more energy efficient seat heater instead of the cabin heater to keep warm while driving. 
The MAX switch is effective for adjusting the cabin temperature quickly, however, it pulls a lot of energy. Once 
the temperature is set to your liking, it is better to turn off the MAX switch to reduce unnecessary energy 
consumption.
Warning - the headlights and wipers are operated by the 12 Volt battery and do not have a significant impact 
on driving range. Please keep these safety features on while operating the Mitsubishi i when necessary.
The heated seat can be operated when the vehicle starter is 
in the ON position.
The indicator light (A) will illuminate while the heater is on.
When the vehicle is driven in a low or high ambient temperature, its heater or air-conditioning performance may be reduced. The 
use of the heater or air-conditioner can reduce the vehicle’s driving distance. Please refer to the General Information in the Owner’s 
Manual, regarding cautions and actions to deal with intense heat and cold.
DRIVING YOUR MITSUBISHI i 
1- Heater on
2- Heater off 
     
        
        Page 14 of 20

12MITSUBISHI MiEV REMOTE 
Effectively using your Mitsubishi MiEV Remote 
1) Pre-activate the climate control – you can use the controller to set the climate inside the vehicle while the vehicle is plugged in. The 
vehicle cabin’s temperature will be comfortable while utilizing the power from the outlet rather than from the main drive battery.
2) Timed battery charging – you can set a timer to take advantage of lower energy rates by having your Mitsubishi i programmed to 
charge during those off peak hours. 
3) Battery level information – you can view your Mitsubishi i’s charge level on your MiEV Remote without being in your vehicle. 
4) To maximize the range of the MiEV Remote, extend the antenna to its full height. When 
unobstructed, the range is up to 300 feet.
Your Mitsubishi MiEV Remote includes the following functions:
1) Power/communication button – when briefly pushed, settings are communicated to the 
Mitsubishi i. When pushed longer than a second, the controller is turned on or off.
2) Mode button – scrolls to Charging Time, AC, Heater, and Defroster by just pressing the mode 
button
3) Manual charge button – turns charging on or off, bypassing preset timers.
4) Scrolling buttons – scrolls the display items.
5) Communication signal – blinks when communicating with the vehicle and when errors occur.
6) Charging indicator – lights up during charging and blinks if charging cable is not connected 
during charging attempt.
7) ERROR indicator – blinks if there is an operation or communication error.
8) Battery indicator – shows remaining charge of main drive battery. Blinks if battery has less than 
20% charge.
9) Timer indicator – shows whether the timer is on or off.
10) Program timing indicator – shows the amount of time left until timer charging is complete based on the program
 time set.
11) Climate control settings – displays modes currently active.
6
1
8
2
11
3
5
7
9
10
4 
     
        
        Page 15 of 20
13
Press (within 1 second) totransmit the setting data
Press         toSelect On timer setting 
Press                 toSet the waiting time0h -19.5h
ON Timer
Press        toSelect Off timer setting 
OFF Timer
Press                 toSet the charging time0.5h -19.5h-h (Full charge)
Press(within 1 second) totransmit the setting data
Press        toSelect RemoteClimate Controlsetting 
Remote 
Climate Control
Press                 toSelect the A/C mode1.COOL2.HEAT3.DEFROSTER4.A/C OFF
Press(within 1 second)   totransmit the setting data
Press       
Blinking
Manual
Charging
Press(within 1 second)  to transmit the setting data
Hold down more than 1 second                to turn on the MiEV Remote
Hold down more than 3 seconds              to turn off, Remote will also turn off after 30 seconds of inactivity.
To set the Manual charging,Cancelling the Timer Charging Remote Climate  Control
 How to Set the MiEV Remote