2012 MITSUBISHI ASX engine

Identification of fuse
Capacity Colour
7.5 A Brown
10 A Red
15 A Blue
20 A Yellow
25 A Natural (White)
30 A Green (fuse type)/
Pink (fusible link type)
40 A Green (fusible link type) Fuse replacement
E01007800630
1. Before replacing a fuse, always turn off the
electrical circuit concerned and turn the igni-
tion switch to the “LOCK” position or put
the operation mode in OFF.
2. Remove the fuse puller (A) from the inside of the fuse box in the engine compartment. 3. Referring

to the fuse load capacity table,
check the fuse pertaining to the problem. B- Fuse is OK
C- Blown fuse
NOTE l If

any system does not function but the fuse
corresponding to that system is normal, there
may be a fault in the system elsewhere. We
recommend you to have your vehicle checked.
4. Use the fuse puller to insert a new fuse with the same capacity. Make sure you insert the
fuse into the same location in the fuse block. CAUTION
l
If
the newly inserted fuse blows again af-
ter a short time, we recommend you to
have the electrical system checked to find
the cause and rectify it.
l Never use a fuse with a larger capacity
than specified or a substitute (such as a ca-
ble or foil). Doing so could cause the cir-
cuit wires to overheat and create a fire. Maintenance
8-23 8
OGWE12E1

Vehicle labeling
............................................................................ 9-02
Vehicle dimensions....................................................................... 9-04
Vehicle performance.....................................................................9-06
Vehicle weight .............................................................................. 9-07
Engine specifications .................................................................... 9-10
Electrical system ........................................................................... 9-12
Tyres and wheels.......................................................................... 9-13
Fuel consumption ......................................................................... 9-14
Refill capacities ............................................................................ 9-15Specifications
9
OGWE12E1

Vehicle labeling
E01100103069
Vehicle identification number
The
vehicle identification number is stamped on
the bulkhead as shown in the illustration. Vehicle information code plate
The

vehicle information code plate is riveted as
shown in the illustration.
Type 1
Type 2 The plate shows model code, engine model, trans-
mission model and body colour code, etc.
Please

use this number when ordering replacement
parts. 1- Model code
2-

Engine model code
3- Transmission model code
4- Body colour code
5- Interior code
6- Option code
7- Exterior code Vehicle identification number plate
(RHD vehicles only)
The

vehicle identification number is stamped on
the plate riveted to the left front corner of the vehi-
cle body. It is visible from outside of the vehicle
through the windscreen. Engine number
The

engine number is stamped on the engine cylin-
der block as shown in the illustrations.
Petrol-powered vehicles
1600 models *: Front of the vehicleSpecifications
9-02
9
OGWE12E1

Vehicle performance
E01100301924
Petrol-powered vehicles Maximum speed 1600 models
183 km/h (114 mph)1800 models
186 km/h (116 mph)2000 models 2WD
194 km/h (121 mph) 4WD M/T
192 km/h (120 mph) CVT
188 km/h (117 mph)Diesel-powered vehicles
Maximum speed 2WD
200 km/h (124 mph), 189 km/h (117 mph)*4WD
198 km/h (123 mph), 185 km/h (115 mph)*
* : 85 kW engine (Low CO 2 emissions) Specifications
9-06
9
OGWE12E1

Diesel-powered vehicles
Item 2WD
4WD
INFORM
*1 INVITE
INTENSE
INSTYLE Kerb weight Without optional parts 1,445 kg
1,455 kg, 1,450 kg*1
1,520 kg, 1,515 kg*1 With full optional parts 1,475 kg
1,526 kg, 1,521 kg*1
1,591 kg, 1,586 kg*1Maximum gross vehicle weight
2,060 kg, 2,130 kg*2Maximum axle weight Front
1,120 kgRear
1,000 kg, 1,090 kg*2Maximum towable
weight With brake
1,400 kgWithout brake
745 kgMaximum trailer-nose weight
70 kgMaximum roof load
80 kgSeating capacity
5 persons
*1 : 85 kW engine (Low CO 2 emissions)
*2 : In case of trailer towing NOTE
l Trailer specifications indicate the manufacturer’s recommendation. Specifications
9-09 9
OGWE12E1

Engine specifications
E01100602634
Petrol-powered vehicles Item 1600 models 1800 models 2000 models
Engine model
4A924B104B11No. of cylinders
4 in line4 in line4 in lineTotal displacement
1,590 cc1,798 cc1,998 ccBore
75.0 mm86.0 mm86.0 mmStroke
90.0 mm77.4 mm86.0 mmCamshaft
Double overheadDouble overheadDouble overheadMixture preparation
Electronic injectionElectronic injectionElectronic injectionMaximum output (EEC net)
86 kW/6,000 r/min,
86 kW/6,100 r/min *1
85 kW/6,000 r/min *2 103 kW/6,000 r/min
110 kW/6,000 r/minMaximum torque (EEC net)
154 Nm/4,000 r/min177 Nm/4,200 r/min197 Nm/4,200 r/min
*1 : Vehicles for Russia, Kazakhstan and Ukraine
*2 : Vehicles for Belgium and Norway Diesel-powered vehicles
Engine model
4N13No. of cylinders
4 in lineTotal displacement
1,798 ccBore
83.0 mmStroke
83.1 mmCamshaft
Double overheadMixture preparation
Electronic direct injectionMaximum output (EEC net)
110 kW/4,000 r/min, 85 kW/3,500 r/min*
* : 85 kW engine (Low CO 2 emissions) Specifications
9-10
9
OGWE12E1

Maximum torque (EEC net)
300 Nm/2,000 to 3,000 r/min, 300 Nm/1,750 to 2,250 r/min*
* : 85 kW engine (Low CO 2 emissions) Specifications
9-11 9
OGWE12E1

Diesel-powered vehiclesNo. Item Quantity Lubricants
1 Engine oil Petrol-powered ve-
hicles 1600 models Oil pan
4.0 litres
Refer to page 8-04. Oil filter
0.2 litre 1800 models Oil pan
4.0 litres Oil filter
0.3 litre 2000 models Oil pan
4.0 litres Oil filter
0.3 litre Diesel-powered vehicles Oil pan
5.0 litres Oil filter
0.3 litre2 Brake fluid
As requiredBrake fluid DOT 3 or DOT 4Clutch fluid
3 Washer fluid
4.5 litres—Specifications
9-16
9
OGWE12E1