2012 MERCEDES-BENZ R-Class warning

[x] Cancel search: warning

Page 87 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual XTo open: pull remote operating switch  :
for the tailgate until the tailgate opens.XTo close:  turn the SmartKey to position  1
or  2 in the ignition lock.XPress remote operating switch for
tailgate

Page 88 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual DeactivatingXPress and hold the closing button
( Y  page 83) in the tailgate until you hear
two short tones.
Side windows
Important safety notes
GWARNING
When opening or closing the windows, make
sure

Page 89 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual automatic operation by operating the
switch again.
i You can continue to operate the side
windows after you switch off the engine or
remove the SmartKey. This function is
available for up to five minu

Page 90 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual Convenience closing
General information
When you lock the vehicle, you can
simultaneously:
R close the side windows
R close the hinged side windows
R close the sliding sunroof or the panorama
roof wit

Page 91 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual Resetting the side windows
You must reset each side window if:
R the battery has been disconnected or has
become discharged.
R the side window opens again slightly after
being closed fully.
R the side

Page 92 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual The opening/closing procedure of the sliding
sunroof can be immediately halted by
releasing the sliding sunroof switch or, if the
sliding sunroof switch was moved past the
resistance point and release

Page 93 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual XTurn the SmartKey to position 2 in the
ignition lock.XRaise the sliding sunroof fully at the rear
( Y  page 90).XKeep the  2 switch pressed for another
second.XMake sure that the sliding sunroof can

Page 94 of 368

MERCEDES-BENZ R-Class 2012 W251 Owners Manual iWhen opening the roller sunblinds, you
can initiate an automatic opening process.
To do so, press the  2 switch briefly
beyond the point of resistance in the
direction of arrow  ;. Operate the switch