2012 MERCEDES-BENZ M-Class 4 way

G
WARNING If
the indica torlamp inthe SOS button is
flas hing continuou slyand novoice
connection tothe Mercede s-BenzCustomer
Assistance Centerwasestab lished, then the
mbrace systemcouldnot initia tean
emerge ncycall(e.g. therelevant cellular
phone network isnot available ).
The messa ge Call
Failed app
ears inthe
multi function displayforapp roximatel y
10 seconds.
Shoul dthis occur, assistance mustbe
summone dby other means.
Making anemerge ncycall X
To initiate anemerge ncycall
manually: presscover :brie flytoopen
it.
X Press SOSbutton ;brie fly.
The indica torlamp inSOS button ;
flas hes until theemerge ncycallis
conclude d.
X Wai tfor avoice connection tothe
Mercede s-BenzCustomer Assistance
Center.
X After theemerge ncycallisended, close
cover :. G
WARNING If
you feel inany way injeopa rdywhen inthe
vehicl e(e.g. smoke orfire inthe vehicl e,
vehicl ein adange rousroad location), please
do not waitfor voice contact afteryouhave
presse dthe SOS button. Careful lylea vethe
vehicl eand move toasafe location. The Mercede
s-BenzCustomer Assistance Center
wil lau tomatical lycontact localemerge ncy
officia lswith thevehicl e'sapp roximate
loca tion ifthey receive anautomatic SOS
signa land cannot makevoicecontact withthe
vehicl eoccupa nts.
Roadside Assistanc ebutton X
Press andhold Roadsid eAssistance
button :for more thantwoseconds.
This initia tesacall tothe Mercede s-Benz
Cu stomer Assistance Center.Theindica tor
lamp inRoa dsid eAssistance button:
flas hes whilethe call isactive. The Connect
ing Call messa
geapp ears inthe
mul tifunction display.The audi ooutput is
muted.
If aconn ection canbeestablished, the Call
Connected message
appearsinthe
multifunction display.
If acellula rphone network isavaila bleand
there issufficient GPSreception, thembrace
system transmit sdata tothe Mercedes-Ben z
Customer AssistanceCenter, forexample:
R current location ofthe vehicle
R vehicle identification number i
The
displa yof the audi osystem or
COMAND showsthatanmbrace callis
active. During thecall, youcan change to
the navigation menubypressing theNAVI
button onCOMAND, forexample.
Voice output isnot availa ble. Features
301Stowing and features Z

enfor
cemen tagency isinfor med ofthe
location ofthe vehicle. i
If
the anti- theftalarm systemisact ive for
long erthan 30seco nds,mbrac e
autom atically inform sthe Merc edes- Benz
Custom erAss istanc eCent er. Gar
age door opener
Imp ortant safety notes The
Hom eLink®
garage dooropener
int egrat edinthe rear- view mirrorallows you
to operat eup tothr ee diff eren tdoor and gate
systems. i Certain
garagedoordrives are
incompat iblewith theintegr atedgarage
door opener. Ifyou have difficulty
programming theintegr atedgarage door
opener, contactanauthorized Mercedes-
Benz Center orcall one ofthe following
telephone hotlines:
R USA: Mercedes-B enzCustomer
Assist anceCenter at
1-8 00- FOR-ME RCedes
R Canada: Customer Serviceat
1-8 00- 387- 0100 G
WARNIN
G Before
programming theintegrat edremote
cont roltoagarage dooropener orgate
operator, makesurepeople andobject sare
out ofthe way ofthe device toprevent
potent ialharm ordamage. When
programming agarage dooropener, thedoor
moves upordown. Whenprogramming agate
operator, thegate opens orcloses.
Do not use theintegrat edremote controlwith
any garage dooropener thatlacks safety stop
and reverse features asrequired byU.S.
federal safetystandards (thisincludes any
garage dooropener modelmanufactured
before April1,1982 ).A garage doorthat
cann otdetect anobject -signaling thedoor to
stop andreverse -does notmeet current
U.S. federal safetystandards.
When programming agarage dooropener,
park vehicle outside thegarage.
Do not run theengine whileprogramming the
integrat edremote control.Inhalation of
exhaust gasishazardous toyour health. All
exhaust gascont ains carbon monoxide(CO),
and inhaling itcan cause unconsciousness
and possible death.Allexhaust gascont ains
carbon monoxide(CO), andinhaling itcan
cause unconsciousness andpossible death. i
USA
only:
This device complies withpart15ofthe
FCC Rules. Operation issubject tothe
following twocondit ions:
1. This device maynotcause harmful
interf erence, and
2. this device mustaccept anyinterf erence
received, includinginterference thatmay
cause undesired operation.
Any unauthorized modificationtothis
device couldvoidtheuser's authority to
operate theequipment.
FCC ID:CB2HMIH L4 i
Canada
only:
This device complies withRSS-2 10of
Industr yCanada. Operation issubject to
the following twocondit ions:
1. This device maynotcause interference,
and
2. this device mustaccept anyinterf erence
received, includinginterference thatmay
cause undesired operationofthe device.
Any unauthorized modificationtothis
device couldvoidtheuser's authority to
operate theequipment.
IC: 279B -HMIHL4 Featur
es
305Stowing and features Z

out).
Press theremote controlbutton again
before itstops transmitting.
R align theanten nacable ofthe garage door
opener unit.Thiscanimprove signal
reception /transmission.
Opening/cl osingthegara gedoor Once
programmed, theintegr atedgarage
door opener willassume thefunct ionofthe
garage doorsystem's remotecontrol.Please
also read theoperating instructions forthe
garage doorsystem.
X Turn theSmart Keytoposition 2in the
ignition lock.
X Press transmitterbutton ;,=or? inthe
overhead controlpanel thatyouhave
programmed tooperate thegarage door.
Garage doorsystem withafixed code:
indicator lamp:lights upgreen.
Garage doorsystem witharolling code:
indicator lamp:flashes green. i
The
trans mitterwill trans mitasignal for
as long asthe trans mitterbutton isbeing
pressed. Afteramaximum often seconds,
trans mission istermin atedandindicator
lamp :flashes yellow.Press the
transmitter buttonagain,ifnecessary .
Cle aring thememory ofthe integ rated
garage dooropeneron the rear-view
mirror X
Turn theSmartKey toposi tion 2in the
ignitio nlock.
X Press transmitterbutton s; and ?.
The indicator lamplights upyellow .
X Press andhold trans mitterbutton s;
and ?until theindicator lampturns green. i
Make
surethatyouclear thememory of
the integr atedgarage dooropener before
selling thevehicle. Compass
Calling upthe compass Infor
mation onoperating thecompass canbe
found inthe separate COMAND operating
instr uctions. Floo
rmats G
WARNIN
G Whenever
youareusing afloormat, makesure
there isenough clearance andthat the
floormat issecurely fastened.
The floormat shouldalwaysbe securely
fastened usingthefastenin gequipment .
Befor edriving off,chec kthat thefloormat is
securely inplace andadjust itifnec essary. A
loose floormat couldslipand hinder proper
func tioningofthe pedals.
Do not place several floormat son top ofeach
other asthis may impair pedalmoveme nt. Floorm
aton the driver' sside (example)
X Driver's seat/front-passenger seat:
slide therespect iveseat back.
X Rear seats: slidetherespect iveseat
forwards.
X To install: placethefloormat inthe
foot well.
X Press studs:ontoretain ers;.
X To rem ove: pullthefloormat off
retain ers;.
X Remove thefloormat . 308
Featur
esStowing and features

X
Pull release lever:for the hood.
The hood isreleased.
! Make surethatthewindshield wipersare
not folded awayfromthewindshield. You
could otherwise damagethewindshield
wipers orthe hood. X
Reach intothegap, pullhood catch
handle ;upand liftthe hood.
Onc eyou have lifted thehood about
15 inches (40cm), itis automatically
opened therest ofthe way andheld open
by the gas-filled struts.
Closing thehood G
WARNIN
G When
closing thehood, useextreme caution
not tocatc hhands orfingers. Becareful that
you donot close thehood onanyone.
Make surethehood issecurely engaged
before driving off.Donot cont inue driving if
the hood cannolonger engage afteran
accident ,for example. Thehood could otherwise
comeloosewhilethevehicle isin
motion andinjure youand/or others.
X Lower thehood andletitfall from aheight
of approximately 8inches (20cm).
X Check thatthehood hasengaged properly.
If the hood canberaised slightly, itis not
properly engaged. Openitagain andclose
it with alittle more force. Rad
iator i
Vehicles
withadiesel engine: donot
cov erthe radiator ,for examp lewith a
wint erfron tor bug cover.The reading sof
the on-board- diagnos ticsyste mmay
ot her wise beinac curate.Some ofthese
readings arerequired bylaw and must be
accurate atall times. Engine
oil
Notes onthe oillevel Dependin
gon the driving style,thevehicle
consumes upto0.9 USqts. (0.8 l)of oil over
a distance of600 miles (1000 km).Theoil
consumpt ionmay behigher thanthiswhen
the vehicle isnew orifyou frequently driveat
high engine speeds.
Checking theoillevel using theoil
dipst ick Example:
vehicleswithagasoline engine Engine
compar tment
313Maintenance and care Z

Exam
ple: veh icles with adi ese leng ine
X Pa rk the vehicleon alevel surfa ce.
To che ckthe oille vel with the engineat
op era ting temp erature,sw itch theengine
off and waitfor appro xima telyfiv eminu tes.
X Pu lloi ldi psti ck: outo fthe dipstick guide
tube.
X Wipe offoildipstick :.
X Slowly slideoildipstick :into theguide
tube tothe stop, andtake itout again.
If the level isbetween MINmark =and
MAX mark ;,theoillevel iscorrect .
X Ifthe fuel level hassunk toMIN mark =or
below, add0.55 to1.1 USqt(0.5 to1.0 l)
engine oil.
Adding engineoil G
WARNING If
engine oilcomes intocontactwith hot
engine parts,itmay ignite andyoucould burn
yourself. Donot spill anyengine oilon hot
engine parts. H
Environmental
note When
adding oil,take carenottospill any. If
oil enters thesoil orwaterway s,itis harmful
to the environm ent.
! Use only engine oilsand oilfilters that
have been approved forvehicles equipped
with aservice system. Alist ofthe engine
oils and oilfilters tested and approv edin
acc ordan cewith theMerc edes- Benz
Spec ification sfor ServiceProduc tscan be called
upbyvisit inghttp://
www.mb usa.com (USAonly). More
inf orm ation about tested and approv ed
eng ineoils and oilfilters isavailable from
any author izedMerc edes- BenzCent er.
Damage tothe engin eor exhaust systemis
caused bythe following:
R using engineoils and oilfilters which
have notbeen specific allyapproved for
the servic esystem.
R replacing theengin eoil oroil filter after
the replacemen tinterv alreq uired bythe
ser vicesy stem hasel ap sed
R us ing eng ineoilad ditive s.
! Donot addtoo muchoil.If the oille vel is
ab ove the"max" markon the dipsti ck,too
mu choilha sbe en adde d. Thi scan lead to
damag eto theen gin eor thecat alytic
co nvert er. Hav eex ces soil siph oned off. Ex
ample :engi ne oilcap
X Tu rn cap :cou ntercl ockwise and remo ve
it.
X Add engineoil.
If the oille vel isat or below the MIN mark
on the oildi psti ck,
ad d0.55 to1.1 USqt(0.5 to1.0 l)engi ne
oi l.
X Re place cap :onthe fillerneck andturn
clo ckwi se.
Ensu retha tthe cap locks into place
secu rely.
X Ch eck theoille vel againw iththe oil
dipst ick(Ypage 313). 314
Engine
compartm entMaintenance and care

Please
bearthefollow inginmind Resetting
theservice interval display
Aq ualifi edspec ialist workshop,e.g. an
auth orizedMer cedes- BenzCent er,will reset
the servic eint erval display afterthe
nec essary servicework hasbeen carried out.
Furt herinfor mation ,on maint enanc efor
example, canbeobtained atan authoriz ed
Mercedes- BenzCenter ordirect lyfrom
Mercedes- Benz.
! Ifthe servic eint erval display hasbeen
reset unintentionally, havethesetting
corr ectedataMercedes- BenzCenter .
Have servic ework carried outasdescribed
in the Serv iceBook let.This may other wise
lead toincr eased wearanddamage tothe
major assemblies orthe vehicle.
Driving abroad
An ext ensive Mercedes- BenzServ icenetwork
is also available inother countries.Youcan
obtain furtherinfor mation fromany
authoriz edMercedes- BenzCenter . Care
Notes
oncare
Regular careofyour vehicle isacon dition for
retain ingthe quality inthe long term.
Use care product sand cleanin gagents
recom mended andapproved byMercedes-
Ben z. G
WARN
ING Many
cleanin gproduct scan behazardous.
Some arepoisonous, othersare flammable.
Always followtheinstruct ions onthe
particular container .Always openyour
vehic le'sdoors orwindows whencleaningthe
inside .
Never usefluids orsolven tsthat arenot
design edfor clean ingyour vehic le.
Always lockaway cleaningproduc tsand keep
the mout ofreach ofchildr en. !
For clean ingyour vehic le,do not use any
of the followin g:
R dry, rough orhard cloths
R abrasive cleaningagent s
R solven ts
R clean ingagent scon tain ingsolven ts
Do not scrub.
Do not touc hthe surfac esorprot ective
films withhard objects, e.g. arin gor ice
scr aper. Youcould otherwise scratc hor
damage thesurfac esand protective film. H
Envir
onment alnote Disp
oseofempt ypack aging andclean ing
clot hsinan env iron men tally respo nsible
mann er.
! Donot park thevehic lefor anext ended
period straight afterclean ingit,part icularly
aft erhavin gclean edthe wheels withwheel
clean er.Wheel cleanerscould cause
inc reased corrosio nofthe brake discsand
brake pads/linings. Forthis reason, you
should driveforafew minutes after
cleaning. Brakingheatsthebrake discsand
the brake pads/linings, thusdrying them.
The vehicle canthen beparked. Exterior
care
Automat iccar wash G
WARNING Braking
efficiency isreduced afterwashing
the vehicle. Thiscould cause anaccident. For
this reason, youmust driveparticularly
carefully afterwashing thevehicle untilthe
brakes havedried.
You canwash thevehicle inan automatic car
wash fromthevery start.
! Never cleanyourvehicle inaTouchless
Automatic CarWash asthese usespecial
cleaning agents.Thesecleaning agentscan
damage thepaintwork orplastic parts. 318
CareMaintenance and care

!
Alway smaintain adistance ofat least
11.8 in(30 cm) between thevehicle andthe
power washer nozzle.Information about
the correct distance isavail able from the
equi pment manufacturer.
Move thepower washer nozzlearound
when cleaning yourvehicle.
Do not aim directly atany ofthe followi ng:
R tires
R door gaps, roofgaps, joints etc.
R electrical component s
R battery
R conn ectors
R lights
R seals
R trim elements
R ventilation slots
Damaged sealsorelectrical component s
can lead toleaks orfailu res.
Cle aning thewhee ls !
Donot use acidic wheelcleaning products
to remove brakedust.Thiscould damage
wheel boltsandbrake component s.
! Donot park thevehicle foranextended
period straight aftercleaning it,particula rly
after having cleaned thewheels withwheel
cleaner. Wheelcleaners couldcause
increased corrosionofthe brake discsand
brake pads/li nings.Forthis reason, you
should driveforafew minutes after
cleaning. Brakingheatsthebrake discsand
the brake pads/li nings,thusdrying them.
The vehicle canthen beparked.
Cle aning thepaintwork Scratc
hes,corrosive deposits,areasaffected
by corrosion anddamage causedby
inadequ atecare cannot always becompletely
repaired .Ins uch cases, visitaqualif ied
spec ialist workshop,e.g. an auth orized
Mer cedes- BenzCent er. X
Remove impurities immediately, where
possible, whilstavoiding rubbingtoohard.
X Soak insectremains withinsec tremover
and rinse offthe treat edareas afterwards.
X Soak birddroppings withwater andrinse
off the treat edareas afterwards.
X Remove coolant,brake fluid,treeresin,
oils, fuels andgreases byrubbing gently
with aclot hsoaked inpetroleum etheror
lighter fluid.
X Use tarremover toremove tarstains .
X Use silicone remover toremove wax.
! Donot affix:
R stic kers
R films
R magnet icplates orsimilar items
to painted surfaces. Youcould otherwise
damage thepaintwork .
If water nolonger forms"beads" onthe paint
surface, usethepaint careproduct s
recom mended andapproved byMercedes-
Ben z.This isthe case approximat elyevery
thr ee tofive mont hs,depending onthe
climate conditions andthecare product used.
If dirt has penet rated thepaint surface orthe
paint hasbecome dull,thepaint cleaner
recom mended andapproved byMercedes-
Ben zshould beused.
Do not use these careproducts inthe sun or
on the hood while thehood ishot.
X Use asuitable touch-up stick,e.g. MB
Touch-Up Stick,to correct smaller areasof
paint damage quicklyandprovisionally .
Matt efinish care If
your vehicle hasaclear matte finish,
observe thefollowing instructionsinorder to
avoid damage tothe paintwork dueto
incorrec tcare.
These notesalsoapply tolight alloy wheels
with aclear matte finish. 320
CareMaintenance and care

!
Never polish thevehicle orthe light alloy
wheels. Polishingcauses thefinish to
shine.
! The followi ngmay cause thepaint to
become shinyandthus reduce thematte
effect:
R Vigorous rubbingwithunsuitabl e
materials.
R Frequent useofcar washes.
R Washing thevehicle indirect sunlight.
! Never usepaint cleaner, buffingor
polishi ngproducts, orgloss preserver, e.g.
wax. These products areonly suitabl efor
high-gloss surfaces.Theiruseonvehicles
with matte finishleadsto considerable
surface damage (shiny,spotted areas).
Alway shave paintwork repairsperformed
at aqual ified speciali stworkshop, e.g.an
authorized Mercedes-Benz Center.
! Donot use wash programs withahot wax
treatment underanycircumstances. i
The
vehicle shouldpreferably bewashed
by hand using asoft sponge, carshampoo
and plenty ofwater. i
Use
only insect remover andcarshampoo
from therange ofrecommended and
approved Mercedes-Benz careproducts.
Cle aning thewindow s G
WARNING Before
cleaning thewindshiel dorwiper
blades, switchoff the windsh ieldwipers and
remo vethe Smar tKey fromthe ignit ionlock .
On vehic leswith KEYLE SS-GO, press the
St art/ Stop butt onrepeat edlyuntilall
indic atorlamps inthe inst rumen tcluster have
gon eout. Thewindsh ieldwipers could
oth erwise moveandinjure you.
X Clean theinside andouts ideofthe
windows withadamp clothand aclean ing
agent thatisrec omme ndedandapprov ed
by Merc edes- Benz. !
Donot use drycloths,abrasive products,
solven tsor clean ingagent scont aining
solvent sto clean theinside ofthe windows.
Do not touch theinsides ofthe windows
with hard object s,e.g. anice scraper or
ring. There isotherwise arisk ofdamaging
the windows.
! Clean thewater drainage channelsofthe
windshield andtherear window atregular
interv als.Deposits suchasleaves, petals
and pollen mayunder certain
circumst ancesprevent waterfromdraining
away .This can lead tocorrosion damage
and damage toelectron iccomponen ts.
Cleanin gthe wiper blades G
WARNING Before
cleaning thewindshield orwiper
blades, switchoffthe windshield wipersand
remove theSmartK eyfrom theignition lock.
On vehicles withKEYLES S-GO,pressthe
Start /Stopbutton repeatedly untilall
indicator lampsinthe instrumen tcluster have
gon eout. Thewindsh ieldwipers could
oth erwise moveandinjure you.
! Donot pull thewiper blade. Otherwise,
the wiper bladecouldbedamaged.
! Donot clean wiper blades toooften and
do not rub themt oohard. Otherwise, the
graphite coatingcouldbedamaged. This
could cause wipernoise.
X Fold thewiper armsaway fromthe
windshield.
X Carefully cleanthewiper blades witha
damp cloth.
X Fold thewindshield wipersbackagain
before switching onthe ignition.
! Hold thewiper armsecurely whenfolding
back. Thewindshield couldbedamaged if
the wiper armsmacks againstitsuddenly. Care
321Maintenance and care Z