2012 MERCEDES-BENZ G-Class windshield wipers

Index
....................................................... 4Introduction .........................................
17 At a glance
........................................... 23 Safety ...................................................
31 Opening/closing
................................. 59 Seats, steering wheel and mirrors ....
73 Lights and windshield wipers
............87 Climate control
................................. 103 Driving and parking ..........................
113 On-board computer and displays
....151 Stowing and features .......................
187 Maintenance and care
......................209 Breakdown assistance
.....................223 Wheels and tires ...............................
241 Technical data ...................................
269 Contents
3

SRS ................................................
183
Tire pressure monitor .................... 185
Warranty ............................................ 270
Washer fluid Display message ............................ 177
Wheel bolt tightening torque
...........229
Wheels Changing a wheel .......................... 227
Checking ........................................ 243
Cleaning ......................................... 218
Important safety notes .................. 242
Interchanging/changing ................265
Mounting a wheel .......................... 229
Removing a wheel ..........................229
Storing ........................................... 266
Technical data ............................... 266
Tightening torque ........................... 229
Window curtain air bag
Operation ......................................... 37
Windows
see Side windows
Windows (cleaning instructions) .....219
Windshield heating ...........................108
Windshield washer system .............. 214
Windshield wipers Important safety notes .................... 99
Replacing the wiper blades ............ 100
Switching on/off ........................... 100
Troubleshooting ............................. 101
Winter
Driving in winter ............................. 134
Winter operation ............................ 244
Winter tires
M+S tires ....................................... 244
Wiper blades
Cleaning ......................................... 21916
Index

Useful information ..............................
88
Exterior lighting .................................. 88
Interior lighting ................................... 92
Replacing bulbs ................................... 94
Windshield wipers .............................. 99 87Lights and windshield wipers

Useful information
i This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please
note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i Please read the information on qualified
specialist workshops (Y page 20). Exterior lighting
Important safety notes
For reasons of safety, Mercedes-Benz
recommends that you drive with the lights
switched on

even during the daytime. In some
countries, operation of the headlamps varies
due to legal requirements and self-imposed
obligations. In these countries, the daytime
running lamps are automatically switched on
when the engine is started. Information about driving abroad
To convert to symmetrical low beam
when driving

abroad: switch the headlamps
to symmetrical low beam in countries in
which traffic drives on the opposite side of the
road from the country where the vehicle is
registered. This prevents glare to oncoming
traffic. Symmetrical lights do not illuminate
as large an area of the edge of the road.
Have the headlamps converted at a qualified
specialist workshop as close to the border as
possible before driving in these countries.
To convert to asymmetrical low beam
after returning: have the headlamps
converted back to asymmetrical low beam at
a qualified specialist workshop as soon as
possible after crossing the border and
returning to the original country. Light switch
Operation 1
W
Left-hand standing lamps
2X Right-hand standing lamps
3$ Lights off/daytime running lamps
4Ã Automatic headlamp mode/daytime
running lamps
5T Parking lamps, side marker lamps,
license plate and instrument cluster
lighting
6L Low-beam/high-beam headlamps
7N Front fog lamps
8R Rear fog lamp
The turn signals, high-beam headlamps and
the high-beam

flasher are operated using the
combination switch (Y page 91).
! Switch off the standing lamps, parking
lamps and low-beam headlamps when you
leave the vehicle. This prevents the battery
from discharging.
The exterior lighting (except the parking
lamps) switches off automatically if you:
R remove the SmartKey from the ignition lock
R open the driver's door with the SmartKey
in position 0
If you hear a warning tone when you leave the
vehicle, the lights may still be switched on.
The Switch off lights message appears
in the multifunction display.
X Turn the light switch to $ or Ã.
X If you see the Switch off lights or
remove key message in the multifunction 88
Exterior lightingLights and windshield wipers

display, remove the SmartKey from the
ignition lock.
or
X Turn the light switch to $ or Ã.
Low-beam headlamps X
To switch on: turn the SmartKey to
position 2 in the ignition lock or start the
engine.
X Turn the light switch to L.
The L indicator lamp in the instrument
cluster lights up.
X To switch off: turn the light switch to
$.
Daytime running lamps Daytime running lamps in Canada
The "daytime running lamps" function is
required
by
law in Canada. It cannot therefore
be deactivated.
X Turn the light switch to $ or Ã.
When the engine is running: depending on
the ambient

light, the low-beam headlamps
or the parking lamps are switched on.
When the low-beam headlamps are
switched on, the L indicator lamp in the
instrument cluster lights up.
If the light switch is set to $
or Ã
, you
cannot activate the high-beam headlamps.
However, the high-beam flasher can always
be used. Turn the light switch to L when
driving at night. You can switch on the high-
beam headlamps in this position.
When the engine is running and the vehicle is
stationary: if you move the selector lever from
a driving position to N or P, the low-beam
headlamps go out after three minutes.
When the engine is running: if you turn the
light switch to T, you turn on the parking
lamps and low-beam headlamps.
When the engine is running: if you turn the
light switch to L, the manual settings take
precedence over the daytime running lamps. Daytime running lamps in the USA
In the USA, the daytime running lamps are
deactivated upon delivery from the factory.
X
To switch on: activate the daytime
running lamps function in the on-board
computer (Y page 160).
X Turn the light switch to $ or Ã.
When the engine is on: the low-beam
headlamps are switched on. The L
indicator lamp in the instrument cluster
lights up.
If the light switch is set to $
or Ã
, you
cannot switch on the high-beam headlamps
in bright conditions. Turn the light switch to
L. You can switch on the high-beam
headlamps in this position.
If the light switch is set to $, Ã or
L, you can switch on the high-beam
headlamps in less bright conditions.
However, the high-beam flasher can always
be used.
Turn the light switch to L when driving at
night.
When the engine is running: if you turn the
light switch to T or L, the manual
settings take precedence over the daytime
running lamps.
Automatic headlamp mode G
WARNING
If the exterior lamp switch is set to Ã, the
headlamps will not automatically come on
under foggy conditions.
To minimize

risk to you and to others, activate
headlamps by turning exterior lamp switch to
L when traffic and/or ambient lighting
conditions require you to do so.
In low ambient lighting conditions, only switch
from position à to L with the vehicle
at a standstill in a safe location. Switching
from à to L will briefly switch off the
headlamps. Doing so while driving in low
ambient lighting conditions may result in an
accident. Exterior lighting
89
Lights and windshield wipers
Z

The automatic headlamp feature is only an aid
to the

driver. The driver is responsible for the
operation of the vehicle’s lights at all times.
The parking lamps, low-beam headlamps and
license plate lamp are switched on or off
automatically, depending on the brightness of
the ambient light.
X To switch on: turn the light switch to
Ã.
SmartKey in

position 1 in the ignition lock:
the parking lamps are switched on or off
automatically depending on the brightness
of the ambient light.
When the engine is running: depending on
the ambient light, the parking lamps, the
low-beam headlamps and the license plate
lamp are switched on or off automatically.
When the low-beam headlamps are
switched on, the L indicator lamp in the
instrument cluster lights up.
Canada only:
if
the light switch is in position
$ or Ã, you cannot switch on the high-
beam headlamps. However, the high-beam
flasher can always be used. Turn the light
switch to L when driving at night. You can
switch on the high-beam headlamps in this
position.
Front fog lamps and rear fog lamp Front fog lamps
G
WARNING
If you suspect that driving conditions will be
foggy, turn

the light switch to L before you
start your journey. Your vehicle may
otherwise not be visible and you could
endanger yourself and others. G
WARNING
In low ambient lighting or foggy conditions,
only switch from position
à to L with
the vehicle at a standstill in a safe location.
Switching from à to L will briefly
switch off the headlamps. Doing so while driving in low ambient lighting conditions may
result in an accident.
X To switch on: turn the SmartKey to
position 2 in the ignition lock or start the
engine.
X Turn the light switch to L or T
. If the
light switch is set to Ã, you cannot
switch on the fog lamps.
X Pull the light switch out to the first detent.
The green N

indicator lamp on the light
switch lights up.
X To switch off: press the light switch in as
far as it will go.
The green N

indicator lamp on the light
switch goes out.
Rear fog lamp
X To switch on: turn the SmartKey to
position 2 in the ignition lock or start the
engine.
X Turn the light switch to L
or T
. If the
light switch is set to Ã, you cannot
switch on the rear fog lamp.
X Pull the light switch out to the second
detent.
The yellow R

indicator lamp on the light
switch lights up.
X To switch off: press the light switch in as
far as it will go.
The yellow R

indicator lamp on the light
switch goes out. 90
Exterior lighting
Lights and windshield wipers

Combination switch
Turn signals X
To indicate briefly:
press the
combination
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
X To indicate: press the
combination switch
beyond the pressure point in the direction
of arrow ; or ?.
The corresponding ! or # indicator
lamp in the instrument cluster flashes.
High-beam headlamps X
To switch on: turn the SmartKey to
position
2 in the ignition lock or start the
engine.
X Turn the light switch to L or Ã.
X Press the combination switch beyond the
pressure point in the direction of
arrow :.
In the à position, the high-beam
headlamps are only switched on when it is
dark.
X To deactivate: move the combination
switch back to its normal position.
The K indicator lamp in the instrument
cluster goes out. High-beam flasher X
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
X Pull the combination switch briefly in the
direction of arrow =.
The K indicator lamp in the instrument
cluster lights up briefly. Hazard warning lamps
The hazard warning lamps switch on
automatically if an air bag or the Emergency
Tensioning Devices are triggered and the
SmartKey is

in position 1 in the ignition lock.
X To switch on: press button :.
All turn signals flash. If you now switch on
a turn

signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
X To switch off: press button :.
i The hazard warning lamps still operate if
the ignition is switched off. Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated fifteen

times while the lights are on
and the engine is running (Y page 100). When
you switch off the ignition, the automatic
headlamp cleaning system is reset and
counting is resumed from 0. Exterior lighting
91
Lights and windshield wipers Z

X
To switch on manually: turn the
SmartKey to position 2 in the ignition lock
or start the engine.
X Briefly press button : of the headlamp
cleaning system.
The headlamps are cleaned with a high-
pressure water jet. Cornering light function
The cornering light function improves the
illumination of the road over a wide angle in
the direction
you are turning, enabling better
visibility in tight bends, for example. It can
only be activated if the low-beam headlamps
are switched on and the fog lamp is switched
off.
Active: if you are driving at speeds below
25 mph(40 km/h) and switch on the turn
signals and turn the steering wheel.
Not active: if you are driving at speeds above
25 mph(40 km/h) or switch off the turn signal
and turn the steering wheel to the straight-
ahead position.
The cornering lamp may remain lit for a short
time. Headlamps and indicator lamps
fogged up on the inside
The headlamps

and the indicator lamps in the
exterior mirrors may fog up on the inside if
there is high atmospheric humidity. X
Drive with the headlamps switched on.
The level of moisture diminishes,
depending on

the length of the journey and
the weather conditions (humidity and
temperature).
If the level of moisture does not diminish:
X Have the headlamps checked at a qualified
specialist workshop. Interior lighting
Overview of interior lighting
Front overhead control panel
:
t To switch the cargo compartment
lamp/rear interior lighting on/off
; p Switches the right-hand reading
lamp on/off
= Rocker switch (to control the interior
lighting)
? p Switches the left-hand reading lamp
on/off 92
Interior lighting
Lights and windshield wipers