For safety reasons, the rear seat bench must
only be adjusted when the vehicle is
stationary.
Never drive a vehicle with the tailgate open.
Deadly carbon monoxide (CO) gases may
enter vehicle interior resulting in
unconsciousness and death.
! Ensure that you remove all containers
from the cup holder in the rear before
folding the seat backrest and the seat
cushion of the rear bench seat forwards.
The left-hand and right-hand rear seats can
be folded down to increase the cargo
compartment capacity. The following
changes are possible:
R fold the seat backrests forward
R fold the rear bench seat back fully.
Folding the seat backrest forward :
Seat backrest release lever
; Rear bench seat release lever
i Open the rear doors. This allows you
better access to release lever :.
X Remove the center head restraint
(Y page 78).
X Pull release lever :.
The corresponding seat backrest is
released.
X Fold the seat backrest forward until it
engages. Folding the seat backrest back X
Pull release lever : and fold the seat
backrest backwards.
! Make sure that the seat belt does not
become trapped
when folding the rear seat
backrest back. Otherwise, it could be
damaged.
X Fold the seat backrest back until it engages
audibly in the seat catch.
X Install the head restraints (Y page 78).
Folding the rear bench seat forward X
Fold the backrest forwards (
Y page 191).
X Pull release lever ;.
The corresponding rear bench seat is
released.
X Fold the rear bench seat forward until it
engages.
Folding the rear bench seat into an
upright position X
Fold back the rear bench seat backrest
until it engages audibly in the seat catch.
X Fold the backrest backwards
( Y page 191).
X Install the head restraints (Y page 78). G
WARNING
Make sure that the rear bench seat and front
seat backrest are correctly engaged in
position.
If the seat backrests or rear bench seat are
not fully engaged and the following occurs:
R sharp braking
R a sudden change of direction
R an accident
the seat
backrests or rear bench seat may fold
forwards and instead of being restrained by
the seats as intended you could be injured by
them. Occupants could then also be injured
in the event of an accident, e.g. by objects Stowage areas
191
Stowing and features
Z
X
Step 5: Determine the combined weight of
luggage and cargo being loaded on the
vehicle.
That weight may not safely exceed
the available cargo and luggage load
capacity calculated in step 4.
X Step 6 (if applicable): If your vehicle will
be towing a trailer, load from your trailer
will be transferred to your vehicle. Consult
this manual
to determine how this reduces
the available cargo and luggage load
capacity of your vehicle ( Y page 256).254
Loading the vehicle
Wheels and tires
