2012 MAZDA MODEL CX-7 Owners Manual (in English)

Page 105 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (105,1)
5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
)
facing down.
6. Align the front and back covers and
snap the transmitter shut.
7. Align the key with the

Page 106 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (106,1)
Door Locks
WARNING
Always take all children and pets with
you or leave a responsible person with
them:
Leaving a child or a pet unattended
in a parked vehicle is dangerous. In
hot

Page 107 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (107,1)
qLocking, Unlocking with
Transmitter (with Advanced Key)
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-1

Page 108 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (108,1)
qPower Door Locks
Vehicle lock-out prevention
(With advanced key)
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. All doors and the l

Page 109 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (109,1)
Locking, unlocking with transmitter
(with retractable type key)
All doors and the liftgate can be locked/
unlocked by operating the keyless entry
system transmitter, refer to Keyle

Page 110 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (110,1)
CAUTION
Be careful not to apply excessive force
to the damper stay on the liftgate
such as by putting your hand on the
stay. Otherwise, the damper stay
may bend and affect the lift

Page 111 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (111,1)
NOTE
If the vehicle battery is dead or there is a
malfunction in the electrical system and the
liftgate cannot be unlocked, perform the
following procedure as an emergency measure

Page 112 of 522

MAZDA MODEL CX-7 2012  Owners Manual (in English) Black plate (112,1)
Luggage compartment coverí
Installing the cover
1. Insert the left end of the retractor bar
into the notch.
2. Squeeze the spring holder on right end
of the retractor bar inward,