39
Shifting
■
■Rear transaxle
The LFA’s gear change mechanism consists of a parallel two-shaft layout often used
in modern manual transmissions. In the LFA, the transmission and differential are
integrated and placed near the rear axle, thus realizing a rear transaxle configuration.
Gear shift and select commands are sent by the ECU to a hydraulically operated shift
mechanism for fast and precise operation.
To ensure ample strength and the ability to handle the engine’s broad torque curve,
various areas throughout the transaxle have been reinforced and high-capacity three-
point contact bearings have been adopted. Furthermore, each synchronizer ring
employs a high-friction carbon material to realize quicker engagement and faster
shifts. Additionally, the teeth of all speed gears have been micro-polished for precise
engagement and reduced gear whine.
The transaxle employs its own oil pump and oil cooling system to ensure a constant
supply of oil at a stable temperature even under demanding endurance conditions.
3rd 6th 5th 2nd 1st
Support bearings
Regarding synchronizers, 1st through 4th gears employ triple-cone units while 5th and 6th
gears are double-cone. A TORSEN
® LSD (Limited Slip Differential) with a specific amount
of preload dialed in has been adopted to ensure excellent traction and handling stability.
TORSEN
® LSD is a registered trademark of JTEKT. 4th
110
Engine
Engine Type1LR-GUE
No. of Cyls. & Arrangement 10-cylinders, 72°V type
Valve Mechanism 40-valve DOHC, Rocker Arm Type
Bore x Stroke 88.0 mm x 79.0 mm
Displacement 4,805 cm
3
Compression Ratio12.0:1
Spark Plug Type
*1PK22HTBR-L8 (DENSO)
Engine Oil “Mobil 1 5W-50” API SM or SN
Engine Oil Capacity
*2Single Oil Cooler 13.5 L (14.2 qt., 11.9 Imp. qt.)
Twin Oil Cooler 14.5 L (15.3 qt., 12.8 Imp. qt.)
Lubrication Type Dry Sump
Coolant Type Super Long Life Coolant
Coolant Capacity 25.5 L (26.9 qt., 22.4 Imp. qt.)
Max. Output (SAE-NET) 412 kW (560 PS) 8,700 rpm
Max. Torque (SAE-NET) 480 Nm (48.9 kgf•m) 7,000 rpm
Maximum Engine Speed 9,000 rpm
*1: The spark plugs have been developed exclusively for the 1LR-GUE engine.*2: The figure shown is the total amount of oil contained in the engine, and not the amount of oil required for an oil change.
Engine powerband (Internal measurement)
Engine speed (rpm)
Power (kW)
Torque (Nm)
2,000
450
400
350
300
250
200
150
100
50
0 4,000 6,000 8,000 10,000 500
400
300
111
Technical information
Clutch and Transaxle
ClutchTypeDry Single-Plate Clutch
Diaphragm Spring
Operation Hydraulic Cylinder
Clutch Cover TypeDiaphragm Spring Turnover
Clutch Disc Diameter 240 mm
Transaxle Type ASG
(Automated Sequential Gearbox)
Transaxle Model RB60M
Front Counter Gear Ratio* 1.259
Transaxle Gear Ratios 1st3.231
2nd 2.188
3rd 1.609
4th 1.233
5th 0.970
6th 0.795
Rev 3.587
Differential Gear Ratio 3.417
Differential Type TORSEN
® LSD
Rear Transaxle Gear Oil Oil Viscosity“LT 75W-85” API GL-5
Rear Transaxle Gear Oil Capacity 5.3 L (5.6 qt., 4.7 Imp. qt.)
*: The front counter gear is lubricated by engine oil.
