Page 11 of 128
9
Basic operations
1 Reverse selector switch
Pull the switch to select Reverse (R).
2 Paddle shift switches ("P. 40)
Pull the right paddle shift switch to upshift and the left paddle shift switch to
downshift. Pull both paddle shift switches at once to select Neutral (N).
3 Control pad ("P. 66)
4 “ENGINE START” switch
5 Driving mode selector switch ("P. 26)
6 AUTO driving mode button ("P. 27)
7 Shift speed selector ("P. 41)
Allows the driver to choose their desired shift speeds for the manually shifted
SPORT, NORMAL, and WET driving modes.
8 Parking brake switch
9 Ignition switch
10 Accelerator pedal ("P. 32)
11 Tilt and telescopic steering lock release lever
12 Brake pedal ("P. 50)
13 Hood release lever ("P. 12)
14 Rear hatch opener switch ("P. 12)
15 Fuel filler door opener switch ("P. 12)
16 Outside rear view mirror switches
17 VSC off switch
Turns VSC and TRAC off. Press the switch again to turn VSC and TRAC back on.
Page 14 of 128
12
■
■Opening and closing each door
■
■
Rear hatch
Press the opener switch and then manually lift
up the rear hatch.
If the rear hatch opener switch is inoperable
(
"P. 95)
■
■Fuel filler door
Press the opener switch.
Fuel type Unleaded gasoline only
Fuel tank
capacity
(Reference) 19.3 gal.
(73 L, 16.1 Imp. gal.)
I f t h e f u e l f i l l e r d o o r o p e n e r s w i t c h i s
inoperable (
"P. 95)
■
■Hood
1 Pull the hood release lever.
Page 95 of 128
93
Advice for long-term storage
■
■Battery
Removing the specified fuse helps to suppress parasitic current.
However, as the battery naturally loses its charge over time, it may become discharged
if the vehicle is stored for more than several months.
If the vehicle battery is discharged ( "
P. 94)
■
■Remove the fuse
1 Turn the ignition switch to the “LOCK” position.
2 Open the hood.
Hood ("P. 12)
3 Open the fuse box lid in the engine
compartment.
Push the tabs in and lift the lid off.
4 While referring to the back of the fuse
box lid for the location, use the pull-
out tool A to remove the “D/C CUT”
fuse B and put it into C.
Make sure that the fuse is firmly inserted.
