2012 Lexus HS250h turn signal

1
2
3
4
5
6
7
HS250h_U_75050U
3
1-8. Safety informationCorrect driving posture ............. 107
SRS airbags ..................................... 109
Front passenger occupant classification system .................... 121
Child restraint systems ............... 126
Installing child restraints ............. 130
2-1. Driving procedures Driving the vehicle ........................ 142
Power (ignition) switch ............... 152
EV drive mode ............................... 157
Hybrid transmission ..................... 160
Turn signal lever ............................ 166
Parking brake ................................. 167
Horn.................................................... 168
2-2. Instrument cluster Gauges and meters ..................... 169
Indicators and warning lights ... 173
Multi-information display ............ 177
Head-up display ............................ 183 2-3. Operating the lights and
windshield wipers
Headlight switch .............................. 191
Automatic High Beam ................ 196
Fog light switch ............................. 202
Windshield wipers and washer ........................................... 204
Headlight cleaner switch ............. 211
2-4. Using other driving systems Cruise control ................................ 212
Dynamic radar cruise control............................................. 216
LKA (Lane-Keeping Assist) .... 230
Driving assist systems................. 238
Hill-start assist control ............... 243
Pre-Collision System.................. 245
2-5. Driving information Cargo and luggage ..................... 254
Vehicle load limits........................ 257
Winter driving tips ...................... 258
Trailer towing .................................. 261
Dinghy towing ............................... 262
2When driving

HS250h_U_75050U
8
Pictorial indexExterior
Moon roof P. 93
Headlights (low beam) P. 191
Fog lights P. 202
Turn signal lights P. 166
Side marker lights P. 191
Hood P. 434
Parking lights P. 191
Windshield wipers P. 204Outside rear viewmirrors
P. 87
Turn signal lights P. 166
Headlights (high beam) and
daytime running lights
P. 191, 194

HS250h_U_75050U
9
Tail lights P. 191
Rear window defogger P. 274
Tires
●Rotation
● Replacement
● Inflation pressure
● Information
P. 451
P. 532
P. 567
P. 572Side marker lights P. 191
Fuel filler door P. 97
Turn signal lights P. 166
License plate lights
P. 191
Doors P. 61Trunk P. 64

HS250h_U_75050U
14
Pictorial indexInstrument panel
Headlight switch Turn signal lever
Fog light switch P. 191
P. 166
P. 202
Tilt and telescopic steering
control switch
∗ P. 83
Pre-collision braking off switch ∗ P. 246
Parking brake pedal P. 167
EV drive mode switch
“ECO MODE” switch
“PWR MODE” switch P. 157
P. 162
P. 162
Hood lock release lever P. 434
Tilt and telescopic steering control lever ∗ P. 83
Glove box P. 378
Trunk opener
main switch
P. 64
Power (ignition) switch P. 152
Windshield wipers and
washer switch
P. 204
Gauges and meters
Multi-information display P. 169
P. 177
Audio system *2P. 276

54
1-3. Opening, closing and locking the doors
HS250h_U_75050U
■Notes for locking the doors
●Touching the door lock sensor while wearing gloves may delay or prevent lock
operation. Remove the gloves and touch the lock sensor again.
●When the lock operation is performed using the lock sensor, recognition signals
will be shown up to two consecutive times. After this, no recognition signals will
be given.
●If the door handle becomes wet while the electronic key is within the effective
range, the door may lock and unlock repeatedly. Place the key in a position 6 ft.
(2 m) or more separate from the vehicle while the vehicle is being washed. (Take
care to ensure that the key is not stolen.)
●If the electronic key is inside the vehicle and a door handle becomes wet during
a car wash, a message may be shown on the multi-information display and a
buzzer will sound outside the vehicle. To turn off the alarm, lock all the doors.
●The lock sensor may not work properly if it comes into contact with ice, snow,
mud, etc. Clean the lock sensor and attempt to operate it again, or use the lock
sensor on the lower part of the door handle.
●Fingernails may scrape against the door during operation of the door handle.
Be careful not to injure fingernails or damage the surface of the door.
■Notes for the unlocking function
●A sudden approach to the effective range or door handle may prevent the
doors from being unlocked. In this case, return the door handle to the original
position and check that the doors unlock before pulling the door handle again.
●Gripping the door handle when wearing a glove may not unlock the door.
Remove the gloves and touch the sensor on the back of the handle again.
●If the door handle becomes wet while the electronic key is within the effective
range, the door may lock and unlock repeatedly. Place the key in a position 6 ft.
(2 m) or more separate from the vehicle while the vehicle is being washed. (Take
care to ensure that the key is not stolen.)
●If there is another electronic key in the detection area, it may take slightly longer
to unlock the doors after the door handle is gripped.
●Fingernails may scrape against the door during operation of the door handle.
Be careful not to injure fingernails or damage the surface of the door.

72
1-4. Adjustable components (seats, mirrors, steering wheel)
HS250h_U_75050U
Driving position memory (driver’s seat)∗∗
: If equipped
Your preferred driving position (the po sition of the driver’s seat, steering
wheel and outside rear view mirrors) can be memorized and recalled with
the touch of a button. It is also possible to set this function to activate auto-
matically when the doors are unlocked.
Three different driving positions can be entered into memory.
■ Entering a position to memory
Check that the shift position is in P.
Turn the “POWER” switch to ON mode.
Adjust the driver’s seat, steering wheel and outside rear view
mirrors to the desired positions.
While pressing and holding the
“SET” button, or within 3 sec-
onds of pressing the “SET” but-
ton, press button 1, 2 or 3 until
the signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
■Recalling the memorized position
Check that the shift position is in P.
Turn the “POWER” switch to ON mode.
Press button 1, 2 or 3 until the
signal beeps to recall the
desired position.

73
1-4. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
HS250h_U_75050U
Linking driving position memory with door unlock operation
Record your driving position to button 1, 2 or 3 before performing the fol-
lowing:
Carry only the key (including the card key) to which you want to link the
driving position. If 2 or more keys are in the vehicle, the driving position
cannot be linked properly.
Shift the shift position to P and close the driver’s door. Turn the
“POWER” switch to ON mode. Press the desired button (1, 2 or 3)
to recall the position. Then, while
keep pressing the button, press the
driver’s door lock switches (either
lock or unlock) until the signal
beeps.
The driving position is recalled
when the driver’s door is unlocked
using the entry function or wireless
remote control and the driver ’s
door is opened.

74
1-4. Adjustable components (seats, mirrors, steering wheel)
HS250h_U_75050U
■Operating the driving position memory after turning the “POWER” switch off
Memorized positions (except for the steering wheel position) can be activated up
to 180 seconds after the driver’s door is opened and another 60 seconds after it is
closed again, even after turning the “POWER” switch off.
■Canceling the linked door unlock operation
Turn the “POWER” switch to ON mode and close the driver’s door.
While pressing the “SET” button, press the driver’s door lock switches
(either lock or unlock) until the signal beeps.
■Stopping seat position operation part-way through
Perform any of the following operations:
●Press the “SET” button.
●Press button 1, 2 or 3.
●Adjust the seat using the switches (only cancels seat position recall).
●Adjust the steering wheel using the tilt and telescopic steering control switch
(only cancels steering wheel position recall).
■Correct seat position
When the seat is in the most forward or most backward position, and the seat is
being moved in those directions, the system may not correctly recognize the cur-
rent position and the memorized position will not be correctly recalled.
■Customization
If a seat position is memorized, the driver seat will move back the set distance
(→ P. 584) from that memorized position.
CAUTION
■Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passenger
or squeeze your body against the steering wheel.