2012 JEEP GRAND CHEROKEE Owner handbook (in English)

steering wheel adjustment technical data gas type lane assist emergency towing CD changer

Load previous 8 pages

Page 193 of 380

JEEP GRAND CHEROKEE 2012 Owner handbook (in English) RemoteControl Button Standard Screens Menu Screens
AM/FM/MW/LW SAT–Audio HDD–Hard Disc DriveDISC/DVD AUX/AUX1/AUX2
Mode Select
Menu Screen Setup
Power Screen ON/OFF
Light Remote Backlight ON/OFF
U

Page 194 of 380

Page 195 of 380

Page 196 of 380

Page 197 of 380

Page 198 of 380

JEEP GRAND CHEROKEE 2012 Owner handbook (in English) 1. Power – Turns the screen and wireless
headphone transmitter for the selected Chan-
nel on or off. To hear audio while the screen is
closed, press the Power button to turn the
headphone transmitte

1. Power – Turns the screen and wireless
headphone transmitter for the selected Chan-
nel on or off. To hear audio while the screen is
closed, press the Power button to turn the
headphone transmitter on.
2. Channel Selector Indicators – When a but-
ton is pressed, the currently affected channel
or channel button is illuminated momentarily.
3. Light – Turns the remote control backlighting
on or off. The remote backlighting turns off
automatically after five seconds.4. Channel/Screen Selector Switch - Indicates
which channel is being controlled by the re-
mote control. When the selector switch is in the
Channel 1 position, the remote controls the
functionality of headphone Channel 1 (right
side of the screen). When the selector switch is
in the Channel 2, position the remote controls
the functionality of headphone Channel 2 (left
side of the screen).
5.
– In radio modes, press to seek the next
tunable station. In disc modes, press and hold
to fast forward through the current audio track
or video chapter. In menu modes use to navi-
gate in the menu.
6. / Prev – In radio modes, press to select to
the previous station. In disc modes, press to
advance to the start of the current or previous
audio track or video chapter. In menu modes,
use to navigate in the menu.
7. MENU – Press to return to the main menu of
a DVD disc, to select a satellite audio channel
from the Station list, or select playback modes
(RANDOM for a CD). 8.
/ (Play/Pause) – Begin/resume or pause
disc play.
9. (Stop) – Stops disc play
10. PROG Up/Down – When listening to a radio
mode, pressing PROG Up selects the next
preset and pressing PROG Down selects the
previous preset stored in the radio. When lis-
tening to compressed audio on a data disc,
PROG Up selects the next directory and PROG
Down selects the previous directory. When
listening to a disc in a radio with a multiple-disc
changer, PROG Up selects the next disc and
PROG Down selects the previous disc.
11. MUTE – Press to mute the headphone
audio output for the selected channel.
12. SLOW – Press to slow playback of a DVD
disc. Press play () to resume normal play.
13. STATUS – Press to display the current
status.
Figure 1: Remote Control
194

Page 199 of 380

JEEP GRAND CHEROKEE 2012 Owner handbook (in English) 14. MODE – Press to change the mode of the
selected channel. See the Mode Selection sec-
tion of this manual for details on changing
modes.
15. SETUP – When in a video mode, press the
SETUP button

14. MODE – Press to change the mode of the
selected channel. See the Mode Selection sec-
tion of this manual for details on changing
modes.
15. SETUP – When in a video mode, press the
SETUP button to access the display settings
(see the display settings section) to access the
DVD setup menu, select the menu button on
the radio. When a disc is loaded in the DVD
player (if equipped) and the VES™ mode is
selected and the disc is stopped, press the
SETUP button to access the DVD Setup menu.
(see the DVD Setup Menu of this manual.)
16. BACK – When navigating in menu mode,
press to return to the previous screen. When
navigating a DVDs disc menu, the operation
depends on the disc’s contents.
17. – In radio modes, press to seek to the
previous tunable station. In disc modes, press
and hold to fast rewind through the current
audio track or video chapter. In menu modes
use to navigate in the menu. 18. ENTER – Press to select the highlighted
option in a menu.
19.
/ NEXT – In radio modes, press to select
to the next station. In disc modes, press to
advance to the next audio track or video chap-
ter. In menu modes, use to navigate in the
menu.
Remote Control StorageThe video screen(s) come with a built in stor-
age compartment for the remote control which
is accessible when the screen is opened. To
remove the remote, use your index finger to pull
and rotate the remote towards you. Do not try to
pull the remote straight down as it will be very
difficult to remove. To return the remote back
into its storage area, insert one long edge of the
remote into the two retaining clips first, and
then rotate the remote back up into the other
two retaining clips until it snaps back into
position.
Locking The Remote ControlAll remote control functionality can be disabled
as a parental control feature.
• To disable the Remote Control from making
any changes, press the Video Lock button
add follow the radio’s instructions (select
menu, rear ves, lock). If the vehicle is not
equipped with a DVD player, follow the ra-
dio’s instructions to turn Video Lock on. The
radio and the video screen(s) indicate when
Video Lock is active.
The Remote Control Storage
195

Page 200 of 380

JEEP GRAND CHEROKEE 2012 Owner handbook (in English) •Pressing the Video Lock again or turning the
ignition OFF turns Video Lock OFF and al-
lows remote control operation of the VES™.
Replacing The BatteriesThe remote control requires two AAA batter

•Pressing the Video Lock again or turning the
ignition OFF turns Video Lock OFF and al-
lows remote control operation of the VES™.
Replacing The BatteriesThe remote control requires two AAA batteries
for operation. To replace the batteries:
•Locate the battery compartment on the back
of the remote, then slide the battery cover
downward.
• Replace the batteries, making sure to orient
them according to the polarity diagram
shown.
• Replace the battery compartment cover.
Headphones OperationThe headphones receive two separate chan-
nels of audio using an infrared transmitter from
the video screen.
Front seat occupants receive some headphone
audio coverage to allow them to adjust the
headphone volume for the young rear seat
occupants that may not be able to do so for
themselves. If no audio is heard after increasing the volume
control, verify that the screen is turned on and
in the down position and that the channel is not
muted and the headphone channel selector
switch is on the desired channel. If audio is still
not heard, check that fully charged batteries
are installed in the headphones.
ControlsThe headphone power indicator and controls
are located on the right ear cup.NOTE:
The rear video system must be turned on
before sound can be heard from the head-
phones. To conserve battery life, the head-
phones will automatically turn off approxi-
mately three minutes after the rear video
system is turned off.
Changing the Audio Mode for Headphones
1. Ensure the Remote Control channel/screen
selector switch is in the same position as the
headphone selector switch. .
NOTE:
•
When both switches are on Channel 1, the
Remote is controlling Channel 1 and the
headphones are tuned to the audio of the
VES™ Channel 1.
• When both switches are on Channel 2, the
Remote is controlling Channel 2 and the
headphones are tuned to the audio of the
VES™ Channel 2.
2. Press the MODE button on the remote con-
trol.
3. If the video screen is displaying a video
source (such as a DVD Video), pressing STA-
1. Volume Control
2. Power Button
3. Channel Selection Switch
4. Power Indicator
196

Load next 8 pages

Page: < prev 1-10 ... 161-168 169-176 177-184 185-192 193-200 201-208 209-216 217-224 225-232 ... 384 next >

engine coolant ESP inoperative heater USB air filter night vision