JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Setting the driving position Setting the driving position See page 3, items See page 3, items 25, 30 25, 30 and 31and 31and Engine start/stop Engine start/stop See page 3, item See page 3, item 22
Transmission See page 3, items See page 3, items 2, 6 2, 6 and 16and 16and
Restraints
Comfort adjustmentsStarting and driving
5
4
Driver’s seat
Set the seat position using the following controls.
Cushion length.1.
Side bolster - inflate.2.
Side bolster - deflate.3.
Lumber support.4.
Seat back angle and head restraint.5.
Seat forwards and back, cushion height and cushion 6. angle.
Note:Seat heater controls are accessed via the touch screen.
Steering column
With the vehicle stationary, adjust the steering column 7. to your ideal driving position.
Door mirrors
1. Press the left or right mirror selector.
2. Use the mirror adjuster to set mirror position.
Storing the driving position to memory
Once you have adjusted the driver’s seat, steering column and door mirrors for your ideal driving position, the settings can be stored.
8. Press the SET button to activate the memory store function. The button will illuminate to indicate the memory store function is active.
9. Within 5 seconds, press button 1 or 2 to store the current driving position.
A stored memory position can now be recalled with a press of the appropriate button; 1 or 2. The seat, steering wheel and mirrors will move to their preset positions.
Operating note
Memory buttons must be pressed within five seconds after pressing the SET button otherwise the memory store function will cancel.
Operating note
The engine will continue to run even if the Smart Key is removed from the vehicle by more than 3ft (1 metre). However, if the engine is stopped, it cannot be restarted until the Smart Key is returned to the vehicle.
Operating note
If the engine is switched off with Neutral selected, automatic selection of P is delayed for 10 minutes. DONOTuse this feature to enable towing of the vehicle. Refer to Vehicle recovery in the Owner’s Handbook.A warning indicator on the instrument panel will illuminate if the seat belt of an occupied front seat is not fastened. This may be accompanied by an audible warning.
Using child seats
Refer to Child Seats in the Owner’s Handbook to determine the correct seat for your child.
If it becomes necessary to fit a child restraint on the front passenger seat, make the following seat adjustments.
Move the seat fully rearward.•
Lumber support to minimum setting.•
Seat cushion to highest position.•
Cushion front tilt to lowest position.•
Seat back to upright position.•
Adjust the upper seat belt anchorage to its lowest • position.
Ignition on:
With the Jaguar Smart Key inside the vehicle, press • the START/STOP button to switch on ignition.
A second press will switch off the ignition.•
Engine start
The selector lever must be in • Park or Neutral position to enable engine starting.
With the foot brake depressed, press and release the • START/STOP button to start the engine.
Press again to stop the engine and switch off the • ignition.
Rolling start
If the engine is switched off while the vehicle is moving, it can be restarted by selecting N position then pressing the START/STOP button.
Gearshift interlock
The brake pedal must be depressed before the selector can be moved from the Park position. Maintain brake pressure until a gear is selected.
Select P before switching off the engine. However, if the engine is switched off with Reverse, Drive or Sport selected, the selector will automatically return to P while retracting.
Automatic gear selection
Select D for fully automatic gear changes.
Sport mode
This is an automatic gear change mode, however, change points are modified to make full use of engine power.
Press the selector down and rotate from D to Sport.
Manual gear changes
Manual gear change mode is effective when rapid acceleration and engine braking are required.
To shift down, briefly pull the left-hand paddle.•
To shift up, briefly pull the right-hand paddle.•
P R N D S
STARTENGINESTOP
DSC
5432
1
6
8
7
9
Supercharged vehicles: When the paddles are used in D, gear selection will revert to automatic if use of the paddles is not maintained. With Sselected, continuous manual operation is initiated if the paddles are used.
Non Supercharged vehicles: Manual gear selection is only available in S.
Note:To return to automatic operation pull and hold the right-hand paddle for two seconds.
JJM189640121.indd 4-5JJM189640121.indd 4-5JJM189640121.indd 4-521/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:37
