2012 JAGUAR XF Quick Start Guide

SOME OF THE FEATURES DESCRIBED MAY NOT APPLY TO YOUR VEHICLE.REFER TO THE OWNER’S HANDBOOK FOR FULL OPERATING INSTRUCTIONS.
XF
QUICK START GUIDE
VEHICLE ACCESS 2
DRIVER CONTROLS 3
COMFORT ADJUSTMENTS 4
STARTING AND DRIVING 5
DRIVING AIDS 8
AUDIO AND TOUCH SCREEN 10
HEATING AND VENTILATION 13
NAVIGATION 14
TELEPHONE 15
GAS STATION INFORMATION 16
JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 1JJM189640121.indd 121/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:3221/03/2011 13:48:32

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
3
Vehicle accessDriver controls
Emergency key access
If there is a problem with the Smart Key and it will not unlock the vehicle, use the emergency key access procedure. Press the Smart Key release button 1.Remove the key blade 2.
Insert the blade into the slot beneath the front left-hand door lock cover. Lift slightly and twist to remove the cover. Insert the key into the exposed lock and turn it towards the rear of the vehicle then release it to unlock.
If the vehicle security system was previously armed with the Smart Key, the alarm will sound. To disarm the alarm, press the START STOP button while the Smart Key is inside the vehicle.
Unlocking mode alternatives
Single-point entry allows only the driver’s door to unlock with a single press. A second press unlocks all other doors and the luggage area.
Multi-point entry will unlock all doors and luggage area with a single press.
To change between modes, with the vehicle unlocked, press the lock and unlock buttons simultaneously for three seconds. The hazard warning lamps will flash twice to confirm the change.
Trunk opening
With the vehicle unlocked, the luggage compartment can also be opened by pressing the release button under the chrome finisher at the rear of the vehicle.
Powerfold mirrors
Press buttons 31 simultaneously to fold the mirrors inward. Press again to unfold.
Jaguar Smart Key Jaguar Smart Key
Keyless entry/exit Keyless entry/exit
2
Press once to lock the vehicle and arm only the exterior (perimetric) alarm.
Multi-point entry - Press once to disarm the alarm, unlock all doors and unlock the luggage compartment.
Press once to switch the headlamps on for 25 seconds. Press again to switch off.
Press to open only the luggage compartment. The rest of the security system remains active.
Press and hold for three seconds to activate/cancel the panic alarm.1
2
To unlock the vehicle and disarm the alarm, simply press a door handle button or luggage compartment release button while the Smart Key is within 3 ft (1 metre) of the vehicle.
To lock the vehicle and arm the alarm, first ensure that the Smart Key is outside the vehicle but within 3 ft (1 metre).
Press a door handle button once to single lock. Press it twice within three seconds to double lock.
Rear seat release handles
The split fold rear seats have release handles located in the luggage compartment. Pull to release one or both seat backs and fold forward. Head restraints can be removed if required.
412567
15
19
20
21
22
23
1716
18
2425
29
28
27
26
30
31
32
33
3
891110121314
Turn signals and headlamp control1.
Gearshift down2.
Audio and phone switches3.
Instrument panel, message centre and warning lamps4.
Cruise control switches5.
Gearshift up6.
Wiper/washers7.
Central locking/unlocking8.
Touch screen on/off9.
Touch screen10.
Hazard warning lamps on/off11.
Navigation menu 12.
Phone menu13.
Home menu14.
Climate controls15.
JaguarDrive selector16.
Stability control (DSC) 17.
Speed limiter (ASL)18.
Parking brake 19.
Dynamic mode 20.
Winter mode21.
STOP/START22.
Audio controls23.
Horn/air bag24.
Steering column adjuster25.
Instrument illumination26.
Fog lamps on/off27.
Trunk release28.
Forward alert29.
Mirror controls30.
Powerfold mirror controls31.
Window controls32.
Rear window isolator33.
Care point
The Smart Key may not be detected if it is placed within a metal container or if it is shielded by a device with a back lit LCD screen, (e.g. laptop, smartphone etc.) Keep the Smart Key clear of such devices when attempting Keyless entry or Keyless starting.
Do not leave your Jaguar Smart Key within the luggage compartment, the vehicle WILL NOT automatically unlock (should it become shielded).

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Setting the driving position Setting the driving position See page 3, items See page 3, items 25, 30 25, 30 and 31and 31and Engine start/stop Engine start/stop See page 3, item See page 3, item 22
Transmission See page 3, items See page 3, items 2, 6 2, 6 and 16and 16and
Restraints
Comfort adjustmentsStarting and driving
5
4
Driver’s seat
Set the seat position using the following controls.
Cushion length.1.
Side bolster - inflate.2.
Side bolster - deflate.3.
Lumber support.4.
Seat back angle and head restraint.5.
Seat forwards and back, cushion height and cushion 6. angle.
Note:Seat heater controls are accessed via the touch screen.
Steering column
With the vehicle stationary, adjust the steering column 7. to your ideal driving position.
Door mirrors
1. Press the left or right mirror selector.
2. Use the mirror adjuster to set mirror position.
Storing the driving position to memory
Once you have adjusted the driver’s seat, steering column and door mirrors for your ideal driving position, the settings can be stored.
8. Press the SET button to activate the memory store function. The button will illuminate to indicate the memory store function is active.
9. Within 5 seconds, press button 1 or 2 to store the current driving position.
A stored memory position can now be recalled with a press of the appropriate button; 1 or 2. The seat, steering wheel and mirrors will move to their preset positions.
Operating note
Memory buttons must be pressed within five seconds after pressing the SET button otherwise the memory store function will cancel.
Operating note
The engine will continue to run even if the Smart Key is removed from the vehicle by more than 3ft (1 metre). However, if the engine is stopped, it cannot be restarted until the Smart Key is returned to the vehicle.
Operating note
If the engine is switched off with Neutral selected, automatic selection of P is delayed for 10 minutes. DONOTuse this feature to enable towing of the vehicle. Refer to Vehicle recovery in the Owner’s Handbook.A warning indicator on the instrument panel will illuminate if the seat belt of an occupied front seat is not fastened. This may be accompanied by an audible warning.
Using child seats
Refer to Child Seats in the Owner’s Handbook to determine the correct seat for your child.
If it becomes necessary to fit a child restraint on the front passenger seat, make the following seat adjustments.
Move the seat fully rearward.•
Lumber support to minimum setting.•
Seat cushion to highest position.•
Cushion front tilt to lowest position.•
Seat back to upright position.•
Adjust the upper seat belt anchorage to its lowest • position.
Ignition on:
With the Jaguar Smart Key inside the vehicle, press • the START/STOP button to switch on ignition.
A second press will switch off the ignition.•
Engine start
The selector lever must be in • Park or Neutral position to enable engine starting.
With the foot brake depressed, press and release the • START/STOP button to start the engine.
Press again to stop the engine and switch off the • ignition.

Rolling start
If the engine is switched off while the vehicle is moving, it can be restarted by selecting N position then pressing the START/STOP button.
Gearshift interlock
The brake pedal must be depressed before the selector can be moved from the Park position. Maintain brake pressure until a gear is selected.
Select P before switching off the engine. However, if the engine is switched off with Reverse, Drive or Sport selected, the selector will automatically return to P while retracting.
Automatic gear selection
Select D for fully automatic gear changes.
Sport mode
This is an automatic gear change mode, however, change points are modified to make full use of engine power.
Press the selector down and rotate from D to Sport.
Manual gear changes
Manual gear change mode is effective when rapid acceleration and engine braking are required.
To shift down, briefly pull the left-hand paddle.•
To shift up, briefly pull the right-hand paddle.•
P R N D S
STARTENGINESTOP
DSC
5432
1
6
8
7
9
Supercharged vehicles: When the paddles are used in D, gear selection will revert to automatic if use of the paddles is not maintained. With Sselected, continuous manual operation is initiated if the paddles are used.
Non Supercharged vehicles: Manual gear selection is only available in S.
Note:To return to automatic operation pull and hold the right-hand paddle for two seconds.
JJM189640121.indd 4-5JJM189640121.indd 4-5JJM189640121.indd 4-521/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:3721/03/2011 13:48:37

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Warning lamps Warning lamps Displayed on the instrument panelDisplayed on the instrument panel
Electric parking brake Electric parking brake See page 3, item See page 3, item 19
Auto headlamps and wipers Auto headlamps and wipers See page 3, items See page 3, items 1 and 7and 7and
Starting and driving
6
Releasing
With the ignition on, apply the foot brake and press • down on the parking brake lever.
If the vehicle is stationary with the parking brake • applied and either Drive or Reverse selected, pressing the accelerator will automatically release the parking brake.
Note:Do NOT use the recess in the electric parking brake as a storage area.
Cruise control and forward alert See page 3, items See page 3, items 5 and 29and 29and
Starting and driving
7
Braking system fault or brake fluid low
Braking system fault or brake fluid low. USA only
Dynamic stability control. Flashes when DSC is operating
DSC switched off, Trac DSC on
Automatic speed limiter active
Seat belt reminder
Low tire pressure
Anti-lock braking system fault.
Anti-lock braking system fault. USA only
Engine malfunction
Applying
With the vehicle stationary, lift up the parking brake • lever and then release it. The red warning indicator in the instrument panel will illuminate.
Operating note
The brake must be manually applied when parking.
Cruise control override
Cruise control disengages when brakes are applied or when speed is below 18mph (30 km/h).
Auto high beam
1. When AUTO is selected on the lighting control the side lamps and headlamps will turn on automatically when ambient light fades. With the control in the low beam position, high beam will activate automatically when ambient light falls below a pre set level. Vehicle speed must be above 25 mph (40 km/h).
Exit delay
2, 3, 4. The headlamps can be set to temporarily light your way when you exit the car at night. Rotate the control for exit delay periods of 30 seconds, 60 seconds or 120 seconds.
1
432
MAX
MIN
MAX
MIN
6
5
7
Auto wipers
Automatic wipers are activated by a rain sensor. When the wiper control is moved up to the first position the wipers will operate automatically as required. Sensitivity can be adjusted.
5. First stop for auto position.
6. Rain sensor maximum sensitivity.
7. Rain sensor minimum sensitivity.
Setting cruise control speed
Use to set cruise speed or increase/decrease 1. speed while cruise control is operating.
Resumes the set speed after a cancellation.2.
Cancels current setting but retains in memory.3.
automatically slow down and then maintain your set gap until the road ahead clears. At that point your vehicle will accelerate to the set cruise control speed.
ACC gap setting
4. Press to increase or decrease the set gap to the vehicle ahead. An amber warning icon will illuminate in the instrument panel. The message centre will display the current set gap. There are four gap settings to choose from.
Forward alert
An additional feature of ACC, forward alert provides limited detection of objects in the road ahead. When necessary it will give an audible warning plus the visual warning FORWARDALERT in the message centre. The driver must take appropriate action.
5. Press to activate the Forward Alert function.
The Forward Alert icon will illuminate in the instrument panel.
Sensitivity of detection can be adjusted. With ACC disengaged, use the GAP SETTING control 4 to adjust the setting.
Adaptive cruise control (ACC)
ACC can be programmed to maintain a set gap to the vehicle ahead. If the vehicle ahead is travelling slower than your set cruise control speed, your vehicle will
Driver intervention
ACC IS NOT a collision warning or avoidance system. Additionally the system WILLNOT detect:
Stationary or slow moving vehicles below • 6 mph (10 km/h).
Pedestrians or objects in the roadway.•
Oncoming vehicles in the same lane.•
Automatic car wash
Before entering an automatic car wash, turn the wipers off to deactivate the rain sensor. Otherwise, the wipers will operate during the washing process and may be damaged.
4
32
1
5
Air bag fault
Rear fog lamp on
Forward alert active
Adaptive cruise control active
Automatic speed limiter (ASL) Automatic speed limiter (ASL) See page 3, item See page 3, item 18
ASL allows any speed between 30 km/h and 240 km/h (18 to 150 mph) to be set as a maximum speed. This is useful to ensure any given speed limit is not exceeded.
Setting a speed
The setting procedure can be made while the vehicle is stationary.
Press the 1.ASL button. An ASL warning lamp illuminates in the instrument panel.
Use the cruise control + and - 2.controls to set a speed. The message centre will display the set speed. Adjustment can be made at any time to suit variable speed limits.
If ASL is cancelled due to kick down acceleration or by pressing the cruise control CANCEL, the message centre will display a ‘LIMITERCANCELLED’ message.
Press the RESUME control to reinstate the ASL set speed.
ASL
Driver intervention
When negotiating a steep downhill gradient, vehicle speed may exceed the set speed. The message centre will display a warning.

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
JaguarDrive control JaguarDrive control See page 3, items See page 3, items 17, 20 17, 20 and 21 and 21 and Parking aids Parking aids
Glovebox valet mode
Door mirrors and blind spot monitoring Door mirrors and blind spot monitoring
Driving aidsDriving aids
Winter mode, Dynamic mode and Dynamic Stability Control (DSC) allow the driver to more finely tune the vehicle driving characteristics to suit prevailing conditions.
Winter mode.1. Use in slippery road conditions. Selects 2nd gear for driving away, moderates engine response and modifies gear change strategy to ensure maximum possible traction is achieved.
Dynamic mode.2. Optimises vehicle systems to deliver a high performance driving experience. If Sport mode is now used with paddle gear selection, there is no automatic gear change, even if the rev limit is reached. Dynamic mode remains selected for six hours after the engine is switched off
DSC.3. The default condition at engine start is DSC on and is designed to control vehicle stability.
2
13
TracDSC is an alternative setting that optimises the DSC settings for maximum traction in difficult conditions. TracDSC enables a more involving and focused driving experience. To select TracDSC, press and release the button. Touch again to return to DSC. To turn DSC off, press for more than 10 seconds.
Message centre
The message centre displays the JaguarDrive Selector position, P, R, N, D or S, the manual mode gear selections 1 to 6 (or 1 to 8) and the JaguarDrive Control mode selection.
When TracDSC is selected, the DSC warning lamp will illuminate and the message centre will briefly display TRAC DSC.
When DSC OFF is selected, the DSC warning lamp will illuminate and the message centre will display DSC OFF until DSC is reinstated.
Driving mode settings
Refer to the Owner’s Handbook section, Stability control, for examples of JaguarDrive settings.
Blind spot monitoring
Each mirror displays amber icons to warn of overtaking vehicles in adjacent lanes. The monitored area extends approximately 20 ft (6 meters) behind your rear wheels and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above 10mph (16km/h) while in a forward gear. An amber dot illuminates when speed is below the threshold.
Mirror dip when reversing
This feature can be used to improve lower side views while reversing. It can be enabled or disabled via the touch screen. From the Home screen, select Vehicle, then Veh.settings, then Parking.
To set a dip position:
• with the electric parking brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb and vehicle.
Subsequently, each time reverse gear is selected, the set dip position will be automatically selected. The mirrors will return to their normal position when another gear is selected.
8 9
When Reverse is selected, the rear and front parking aids and rear view camera will activate.
The touch screen will display a vehicle graphic and indicate the approximate distance to any object detected. An audible alert will increase in frequency as the object is approached.
When moving forward into a space, activate the front sensors with the parking aid switch in the overhead panel. Alternatively, select R then Drive.
Audible alert volume can be adjusted via the touch screen. From the Home screen, select Set-up, then System, then Volume presets. Use the + or - softkeys alongside Parking aid to adjust volume.
Cancelling the parking aid screen
Touch the screen to return to the previous view.
Rear view camera
Activates when Reverse is selected. Guidance lines to aid reversing appear on the touch screen. The camera display has priority over the parking aid display. To view the parking aid display instead, or cancel the display at any time, touch the display.
The camera is deactivated when Drive is selected and vehicle speed exceeds 10 mph (16 km/h).
Note:Sensors may activate when water, snow or ice are detected on the surface of the sensors. Ensure that the sensors are cleaned regularly.
To open the glovebox, press the facia mounted switch.
Valet mode
The glovebox and luggage compartment can be security locked to deny access to a parking attendant. Before handing over your Jaguar Smart Key, remove the emergency key blade and keep it in a safe place.
To set your Personal Identification Number (PIN) :
• On the touch screen select Home menu.
• Now select Valet.
• Enter a your four digit PIN (personally chosen) and touch OK. Valet on is displayed as a confirmation.
To deselect valet mode
Access the Valet screen and enter your PIN. Now press OK. Valet off is displayed and the glovebox and luggage compartment are now accessible.
Insert the emergency key blade back into the Jaguar Smart Key.
JJM189640121.indd 8-9JJM189640121.indd 8-9JJM189640121.indd 8-921/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:41

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Audio controls See page 3, items See page 3, items 9, 10, 14 9, 10, 14 and 23and 23and 23 23
AM/FM and HD radio
Satellite radio
CD player and portable media CD player and portable media
Audio and touch screenAudio and touch screen
10
Satellite Radio subscription service
Use channel 184 to preview satellite radio. When the preview time expires you will need to subscribe to SIRIUS to enable further satellite reception.
Touch to select the satellite bands. Touch the 1. + icon to move through SAT 1, 2 and 3.
Use the seek arrows to move up or down to the next 2. or previous channel.
Channel information. Select if there is more 3. information than can fit in the display area.
Channel presets. Each 4. S AT band has 6 preset softkeys. Touch and hold a softkey to store the current channel. A brief touch will access the stored channel.
Select to make personal settings in 5. Options, Channel skip and Parental lock areas.
View a list of available categories.6.
Select to access the touch pad. Enter any 3 digit 7. channel number then select OK.
Touch to view a list of channel categories. Select one 8. to display full details of that channel and the current track.
Store the currently playing track to the song memory. 9. If the audio system subsequently finds a stored track playing on a subscribed channel, notification will be given.
11
Œ(Œ(
Œ(
61234578

Eject CD.1.
Press repeatedly for available audio sources.2.
Press for audio on/off. Rotate for volume.3.
Press for the Audio/Video menu.4.
Seek Down and Up buttons for previous/next 5. radio station or CD track. Hold to enter manual seek mode.
Press repeatedly for touch screen on/off and screen 6. saver options.
Touch any screen softkey to make a selection.7.
Return to Home screen.8.
Touch screen damage
The touch screen requires only light touches. Excess pressure could result in damage.
Turn on the audio system. On the touch screen HomeMenu, touch the Audio/Video option. The last used audio source controls will be displayed. If another audio source is displayed, touch the Radio softkey.
Touch to change to radio or to view wavebands. The 1. +key will change to -. Touch - to exit waveband.
Move up or down to the next or previous station.2.
View information broadcast by the radio station. 3.
Settings menu, select from 4. RDS, Traffic, News, AFand REG.
Station list (FM only). Select to view a list of available 5. stations on the waveband. The list can be sorted by
Frequency, Name or Category (pop, news, sport), by selecting the appropriate soft key. Touch to select the chosen station.
Enter a station frequency. When the final digit is 6. entered the station will be tuned.
Preset softkeys. Can store six stations for each 7. waveband. Touch and hold a softkey to store the current radio station.
From the Audio/Video menu, select My music + to display the audio choice menu.
Touch the 1. My music + icon to display all options. Select an option.
Settings2. menu, select to switch traffic and news announcements on or off.
Depending on the selected mode, this soft key will 3. be either Track list or Browse. In Stored CD mode,
both soft keys will be displayed. Select Track list to view current CD or Stored CD track list. Select a track to start playback. Select Browse to view the contents of selected
device (iPod®, USB and Stored CD modes only).
Upload4. soft key is applicable to Stored CD menu only. To store a CD select Upload alongside an empty slot. There are 10 slots available.
Touch and release to skip up or down to the next or 5. previous track. Touch and hold to scan forwards or back through the current track.
Repeat6. , touch and release to repeat the current track continuously.
Touch and release again to repeat the current stored CD (or folder for MP3 discs).
Touch and release a third time to cancel Repeat mode.
Pause/Play7. . Select to pause playback, select again to resume playback.
View 8. information about the current track.
Shuffle9. , touch and release once to play random tracks from the current CD, MP3 folder, USB folder or
iPod playlist.
Touch and release again to play random tracks from CD, MP3 disc, USB folders or tracks on the media device or tracks loaded onto the stored CD store.
Touch and release a third time to cancel Shuffle mode.
Incompatible disc types
The use of discs with paper labels or dual format discs (Dual Discs or DVD Plus) should be avoided as they could become jammed inside the player.
Activating satellite radio
Call SIRIUS on the displayed telephone number.1.
Provide them with the ID number, also displayed on 2.screen.
You will also need your credit card. Ensure you are parked with a clear view of the sky while activation takes place. Activation can take up to 15 minutes.
Note: Use the seek buttons on the steering wheel Note: Use the seek buttons on the steering wheel Note:to find preset channels.
3
45644444444444445555555555556666666666666Preset 22333333333333333333Preset 11
Program information Frequency Station
Radio
Radio: FM 2
Station list
input Frequency Settings
17:40
SAT Radio
My music
My video
Preset 3
Preset 4 Preset 5 Preset 6
1232
4
5
6
7
3
456
3
45 6
3
456444444444444444445555555555555566666666666666Preset 223
45 6Preset 11
Programme title
Channel No
17:40SAT Radio
Channel list
Browse
Add song Channel
Input Settings
333333333My music
My video
Preset 3
Preset 4 Preset 5 Preset 6
SAT Radio
Radio
12324
5
6
7
8
9
(40%)
Uploading
Browse
Track list
Settings
ShuffleShuffle
Repeat
Chasing Cars
Snow Patrol
Eyes Open
Tr 3
/15Shuffle02.32My music My music
SAT Radio
Radio
17:40My music: Stored CDs
1
2
3
4
567895
My video

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Audio and touch screenHeating and ventilation
12
13
CD player and portable media CD player and portable media
Steering wheel control - audio Steering wheel control - audio See page 3, item See page 3, item 3
Connecting ports for auxiliary devices, iPod® and USB ® and USB ®
storage devices are located inside the centre console cubby box.
iPod and USB devices can be operated from the touch screen. Devices connected to the AUX socket are controlled only from the device itself.
The system will play MP3, WMA, WAV and AAC files from a memory stick or a USB controlled MP3 player or mobile phone.
Some MP3 players use proprietary file systems that are not supported by the vehicle system. MP3 players must be set to Removable Device or Mass Storage Device mode (see the manufacturer’s information). Only music files added to the device while in this mode can be played via the vehicle system.
The vehicle system will support USB devices with a storage capacity up to 256GB.
Audio volume.1.
Scroll through preset radio stations, CD tracks or 2. music folders. Hold to select next/previous strong radio station or next CD.
Audio mute or activates JaguarVoice. 3.
Scroll through source options.4. 4
2
3
1
Heating and ventilation Heating and ventilation See page 3, item See page 3, item 15
Rotate to adjust blower speed. Press to turn climate 1. on/off.
Left and right hand sides temperature controls. 2. Temperature is displayed on the touch screen.
Recirculation. Helps prevent fumes from entering.3.
Press to turn seat heating/climate seats on/off.4.
AUTO.5. Automatic mode. The climate control will adjust air conditioning, blower speed, air intake and airflow distribution to maintain the selected temperature(s). Misting will be reduced
R.6. Heated rear screen.
F.7. Heated front screen.
MAX.8. Fastest method to remove frost or heavy misting from the front screen.
Operating note
Seat heating and ventilating will operate only while the engine is running. This is to prevent the battery becoming discharged.
Operating note
AUTO is the recommended operating mode. This will help prevent misting and reduce odours. External water deposits
The air conditioning system removes moisture from the air and deposits the excess water beneath the vehicle. Puddles may form but this is normal and no cause for concern.
Touch screen controls
To access touch screen control, touch Climate on the Home menu screen.
Heated steering wheel on/off.1.
Settings. For personal settings.2.
Touch to adjust seat heating/climate seats 3. temperature.
Touch to turn climate control off.4.
Synchronises all front and rear settings to match the 5. driver’s.
Air distribution to screen, face or feet.Touch to turn 6. climate control off.
Indicates blower speed (not visible in automatic 7. mode).
A/C.8. Select for economy mode. Turns off the air conditioning compressor.
345687
2
1
2
3
4
5678
Œ(Œ(
5[PEE135977
1
JJM189640121.indd 12-13JJM189640121.indd 12-13JJM189640121.indd 12-1321/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:4421/03/2011 13:48:44

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
NavigationTelephone
14
15
Touch screen navigation Touch screen navigation Bluetooth® phones phones See page 3, item See page 3, item 3
On initial activation, ensure that both the correct country and search area have been selected.
For more information refer to the Navigation section of the Owner’s Handbook.
Setting a destination
From the 1.Nav menu screen, select Destination entry.
Select 2.Address from the Destination entry screen and input the town name.
Once sufficient letters have been entered, touch 3.Listto display all the possible towns. Select the town.
Enter road name. Once sufficient letters have been 4.entered, touch List to display all the possible roads. Select the road.
Enter the house number (if known) then touch 5.OK to confirm. If the house number is not known, touch OK - the mid point of the road is then used as a destination.
Touch 6.Destination to begin calculation of the route options.`
There is now a choice to select 7.3 Routes, Change route or to Start navigation guidance.
Touch 8.3 Routes to display a choice of alternative routes. To use an alternative route, touch the respective box 1, 2 or 3 displayed on the right side of the map.
Touch 9.Go to commence guidance.
The selected route will be displayed and guidance will 10.begin. When your destination is reached, voice and visual confirmation is given.
If the map is moved away from your current location, the position icon will be replaced by a touch button near the top left of the screen. Touch to bring the current location map back into view.While navigation is operating, touch to repeat the last given navigation instruction.
Select Device to vehicle option when using a
iPhone®.
Nav
Cancelling guidance
To cancel guidance, select Nav menu on the map menu and then Cancel guidance.
Compatible Bluetooth® phones can communicate with ® phones can communicate with ®
the vehicle’s inbuilt telephone system. Connection must be made with ignition on or engine running.
Pairing and connecting using the touch screen
Up to 10 mobile phones can be paired. Ensure your
Bluetooth® phone is in ‘discoverable’ mode, sometimes ® phone is in ‘discoverable’ mode, sometimes ®
referred to as ‘find me’ mode. See your operating instructions for more information.
From the Home menu1., select Phone.
A menu will appear. Select 2.Search new.
Select 3.Vehicle to device option.
Indentify your phone from the list and select 4.Pair and connect option.
When prompted, enter the PIN code into your phone. 5.See your operating instructions for more information.
Confirmation of connection will be displayed before 6.switching to the Digit Dial screen.
Changing a connected phone
To change from the currently connected phone to another that has already been paired, follow the steps below:
1. From the Home menu,select Phone.
2. A menu will appear. Select Change phone.
3. Select your phone from the displayed list.
4. Confirmation of connection will be displayed before switching to the Digit Dial screen.
Downloading phonebook entries
When a phone with phonebook download capability is paired and docked, its phonebook directory will automatically download to the vehicle system.
The vehicle phonebook will be updated each time a mobile phone is docked to the system.
Jaguar Bluetooth® Connectivity® Connectivity®
For the latest compatibility information, refer to the Ownership section of the Jaguar website at www.jaguar.com
Bluetooth® selection® selection®
When the starter is turned on, the vehicle searches for up to 10 previously connected phones, starting with the most recent connection.
Telephone echo
If echo is experienced when using the phone, reduce the audio system volume during the call.
Calls via the touch screen
Making a call
1. With a paired and active phone, select Phone from
the Home menu.
2. From the Digit dial screen, enter the number using
the on-screen keypad.
3. Touch icon on the screen to make the call.
4. To end a call touch .
Calls via the steering wheel controls
Volume control. Turn to increase/decrease call 1. volume.
Scroll control. Turn to scroll up/down lists of calls or 2. phone book entries.
Phone/Voice control. Press and release to send, 3. accept or end a call. If Voice control is not fitted, in addition to the above, press and release to access last 10 dialed list; press and hold to access the phonebook search view.
2
3
1
5GVVKPIU
&GNGVG
2JQPGDQQM
&KIKVFKCNName
01234567890_
2JQPG
123
456
789
0#$% &'(
)*+ ,-. /01
2345 6789 :;<
.CUV
%JCPIG2JQPG

JCPFUGV 7UG
'OGTIGPE['OGTIGPE['OGTIOGTIGPE[E[

0CX
&WPOQTG4QCF)25
5GVOGOQT[
RQKPV&GUVKPCVKQP 5GVKPVGTGUV 2QKPVQH
0CXOGPW
MOMO
%CPEGN
DTQYUG
OQFG


JJM189640121.indd 14-15JJM189640121.indd 14-15JJM189640121.indd 14-1521/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:47