2012 INFINITI G37 phone

Black plate (267,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]ANTENNA GUID-AE59AE39-282B-471D-AAE3-AF1B262D1067
Window antenna GUID-408E3CB9-D7B6-4535-98F3-BE82D1245CF6
The antenna pattern is printed inside the
rear window.
CAUTION. Do not place metalized film near the rear
window glass or attach any metal parts
to it. This may cause poor reception or
noise.
. When cleaning the inside of the rear
window, be careful not to scratch or
damage the rear window antenna.
Lightly wipe along the antenna with a
dampened soft cloth. GUID-4281BF2E-5AF1-4794-99C8-250FE5F478D9
When installing a car phone or a CB radio
in your vehicle, be sure to observe the
following cautions, otherwise the new
equipment may adversely affect the elec-
tronic control modules and electronic con-
trol system harness.
WARNING . A cellular phone should not be used for
any purpose while driving so full atten-
tion may be given to vehicle operation.
Some jurisdictions prohibit the use of
cellular phones while driving.
. If you must make a call while your
vehicle is in motion, the hands-free
cellular phone operational mode (if so
equipped) is highly recommended. Ex-
ercise extreme caution at all times so full
attention may be given to vehicle opera-
tion.
. If a conversation in a moving vehicle
requires you to take notes, pull off the
road to a safe location and stop your
vehicle before doing so. CAUTION . Keep the antenna as far away as
possible from the electronic control
modules.
. Keep the antenna wire more than 8 in
(20 cm) away from the electronic control
system harness. Do not route the anten-
na wire next to any harness.
. Adjust the antenna standing-wave ratio
as recommended by the manufacturer.
. Connect the ground wire from the CB
radio chassis to the body.
. For details, consult an INFINITI retailer.
Monitor, climate, audio, phone and voice recognition systems
4-89CAR PHONE OR CB RADIO

Black plate (268,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-90 Monitor, climate, audio, phone and voice recognition systems GUID-C97140DA-85AB-4A83-B611-9C3AD1DFBDC7
WARNING. Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
. If you find yourself unable to devote full
attention to vehicle operation while
talking on the phone, pull off the road
to a safe location and stop your vehicle
before doing so.
CAUTIONTo avoid draining the vehicle battery, use a
phone after starting the engine.
Your INFINITI is equipped with Bluetooth ®
Hands-Free Phone System. If you are an
owner of a compatible Bluetooth ®
enabled
cellular phone, you can set up the wireless
connection between your cellular phone
and the in-vehicle phone module. With
Bluetooth ®
wireless technology, you can
make or receive a telephone call with your
cellular phone in your pocket. Once a cellular phone is connected to the
in-vehicle phone module, no phone con-
necting procedure is required anymore.
Your phone is automatically connected
with the in-vehicle phone module when
the ignition switch is pushed to the ON
position with the registered cellular phone
turned on and carried in the vehicle.
You can register up to 5 different Blue-
tooth ®
cellular phones in the in-vehicle
phone module. However, you can talk on
only one cellular phone at a time.
The INFINITI Voice Recognition system
supports the phone commands, so dialing
a phone number using your voice is
possible. For more details, see “ INFINITI
Voice Recognition system (models with
navigation system) ” (P.4-114).
Before using the Bluetooth ®
Hands-Free
Phone System, refer to the following notes.
. Wireless LAN (Wi-Fi) and the Bluetooth ®
functions share the same frequency
band (2.4 GHz). Using the Bluetooth ®
and the wireless LAN functions at the
same time may slow down or discon-
nect the communication and cause
undesired noise. It is recommended
that you turn off the wireless LAN (Wi-
Fi) when using the Bluetooth ®
func- tions.
. Set up the wireless connection between
a compatible cellular phone and the in-
vehicle phone module before using the
Bluetooth ®
Hands-Free Phone System.
. Some Bluetooth ®
enabled cellular
phones may not be recognized by the
in-vehicle phone module. Please visit
www.InfinitiUSA.com/bluetooth for a
recommended phone list.
. You will not be able to use a hands-free
phone under the following conditions:
— Your vehicle is outside of the tele-
phone service area.
— Your vehicle is in an area where it is
difficult to receive radio waves; such
as in a tunnel, in an underground
parking garage, behind a tall build-
ing or in a mountainous area.
— Your cellular phone is locked in
order not to be dialed.
. When the radio wave condition is not
ideal or ambient sound is too loud, it
may be difficult to hear the other
person ’ s voice during a call.
. Immediately after the ignition switch is
pushed to the ON position, it may be
impossible to receive a call for a short
period of time.Bluetooth ®
HANDS-FREE PHONE SYSTEM
(models with navigation system)

Black plate (269,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. Do not place the cellular phone in an
area surrounded by metal or far away
from the in-vehicle phone module to
prevent tone quality degradation and
wireless connection disruption.
. While a cellular phone is connected
through the Bluetooth ®
wireless con-
nection, the battery power of the
cellular phone may discharge quicker
than usual.
. If the Bluetooth ®
Hands-Free Phone
System seems to be malfunctioning,
please visit www.InfinitiUSA.com/blue-
tooth for troubleshooting help.
. Some cellular phones or other devices
may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a
different location may reduce or elim-
inate the noise.
. Refer to the cellular phone Owner ’ s
Manual regarding the telephone pairing
procedure specific to your phone,
battery charging, cellular phone anten-
na, etc.
. The antenna display on the monitor will
not coincide with the antenna display
of some cellular phones. . Keep the interior of the vehicle as quiet
as possible to hear the caller ’ s voice
clearly as well as to minimize its
echoes.
. If reception between callers is unclear,
adjusting the incoming or outgoing call
volume may improve the clarity.
REGULATORY INFORMATION GUID-45C8809D-13C7-484B-BAAA-A89D504ED503
FCC Regulatory information GUID-636F13F0-6D27-42F0-A915-498885D2D5D5
. CAUTION: To maintain compliance with
FCC ’ s RF exposure guidelines, use only
the supplied antenna. Unauthorized
antenna, modification, or attachments
could damage the transmitter and may
violate FCC regulations.
. Operation is subject to the following
two conditions:
1. this device may not cause interference
and
2. this device must accept any interfer-
ence, including interference that may
cause undesired operation of the de-
vice
IC Regulatory information GUID-81DEAF38-3ED8-4146-81F8-1F111A551209
. Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired
operation of the device.
. This Class B digital apparatus meets all
requirements of the Canadian Interfer-
ence-Causing Equipment Regulations.
Bluetooth trademark: Bluetooth ®
is a trademark
owned by Bluetooth SIG, Inc.,
and licensed to Clarion Co., Ltd.
VOICE COMMANDS GUID-DC1FBBFE-C9FC-4BE4-98EE-C78349271F4A
You can use voice commands to operate
various Bluetooth ®
Hands-Free Phone Sys-
tem features using the INFINITI Voice
Recognition system.
For more details, see “ INFINITI Voice
Recognition system (models with naviga-
tion system) ” (P.4-114).
Monitor, climate, audio, phone and voice recognition systems
4-91

Black plate (270,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-92 Monitor, climate, audio, phone and voice recognition systems SAA1772
CONTROL BUTTONS GUID-0B868A4F-9B5D-45FD-8767-9633BA3ABBBF
1) PHONE button
2) TALK /PHONE SEND button SAA2519
CONNECTING PROCEDURE GUID-5001AC50-4CF3-478F-AA37-19C8B982C9BF
1. Push the PHONE button or the
button, and select the “ Connect Phone ”
key. SAA2520
2. When a PIN code appears on the
screen, operate the compatible Blue-
tooth ®
cellular phone to enter the PIN
code.
The connecting procedure of the cellu-
lar phone varies according to each
cellular phone. See the cellular phone
Owner ’ s Manual for the details. You can
also visit
www.InfinitiUSA.com/bluetooth or call
INFINITI Consumer Affairs Department
for instructions on pairing INFINITI
recommended cellular phones.
When the connection process is com-
pleted, the screen will return to the

Black plate (271,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]Phone menu display.
PHONE SELECTION GUID-55FEE7E0-1713-47B1-B3A9-605D3DAAC920
Up to 5 cellular phones can be registered
to the system. To switch to connect another
cellular phone, push PHONE button and
select the “ Connected Phones ” key. The
registered cellular phones are shown on
the list. If you select a cellular phone that
is different from the one currently con-
nected, the newly selected phone will be
connected to the system.
VEHICLE PHONEBOOK GUID-9C55C4DB-C8AB-40D9-9A84-A06D2C3EF82D
This vehicle has two phonebooks available
for hands-free use. Depending on the
phone, the system may automatically
download the entire cell phone ’ s phone-
book into the “ Handset Phonebook ” . For
the details about downloading a phone-
book, see “ Phone setting ” (P.4-98). If a
phonebook does not automatically down-
load, the vehicle phonebook may be set for
up to 1,000 entries. This phonebook allows
the recording of a name to speak while
using voice recognition. SAA2521
1. Push the PHONE button and select the
“ Vehicle Phonebook ” key.
2. Select the “ Add New ” key at the top of
the screen. SAA2522
3. Choose the method for entering the
phonebook entry. For this example,
select “ Enter Number by Keypad ” .
4. Enter the digits and select the “ OK ”
key. (See “ How to use touch screen
(models with navigation system) ” (P.4-
5).)
Monitor, climate, audio, phone and voice recognition systems
4-93

Black plate (272,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-94 Monitor, climate, audio, phone and voice recognition systems SAA2523
5. Select the “ Voicetag ” key to record a
name to speak when using the INFINITI
Voice Recognition system.
6. Select the “ Store ” key and prepare to
speak the name after the tone.
7. When the voicetag is successfully
saved, select the “ OK ” key to save the
phonebook entry.
8. After the phonebook entry is saved, it
will show a screen that is ready to call
the number. Press the BACK button to
return to the Vehicle Phonebook.
There are different methods to input a
phone number. Select one of the following options instead of “ Enter Number by Key-
pad ” in step 3.
. Copy from Call History
The system will show a list of incoming,
outgoing or missed calls that were
downloaded from the connected cellu-
lar phone (depending on the phone ’ s
compatibility). Select one of these
entries to save in the vehicle phone-
book.
. Copy from the Handset
The system will show the connected
cellular phone ’ s phonebook that was
downloaded (depending on the
phone ’ s compatibility). Select one of
these entries to save in the vehicle
phonebook. SAA2620
Editing the Vehicle Phonebook GUID-595130B1-D7D0-45B8-8BB0-FEE71007B86A
1. Push the PHONE button and select the
“ Vehicle Phonebook ” key.
2. Select the desired entry from the
displayed list.
3. Select the “ Edit ” key.
4. Select the desired item to change.

Black plate (273,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SAA2523
The following editing items are available:
. Entry #
Changes the displayed number of the
selected entry.
. Name
Edit the name of the entry using the
keypad displayed on the screen.
. Number
Edit the phone number using the key-
pad displayed on the screen.
. Type
Select an icon from the icon list.
. Voicetag
Confirm and store the voicetag. Voice- tags allow easy dialing using the
INFINITI Voice Recognition system.
(See “ INFINITI Voice Recognition system
(models with navigation system) ” (P.4-
114).)
To delete an entry, select the “ Delete ” key
at step 3.
SAA2524
MAKING A CALL GUID-0C40BF3A-B58B-4CB6-9E2E-8530EF09E8AF
To make a call, follow this procedure.
1. Push the PHONE button on the instru-
ment panel or the
button on the
steering wheel. The “ PHONE ” screen
will appear on the display.
2. Select the “ Handset Phonebook ” key
on the “ PHONE ” menu.
3. Select the desired entry from the list.
4. Confirm the correct entry by selecting
for the correct number from the list.
Monitor, climate, audio, phone and voice recognition systems
4-95

Black plate (274,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-96 Monitor, climate, audio, phone and voice recognition systems SAA2621
5. Select the “ Call ” key to start dialing the
number.
There are different methods to make a call.
Select one of the following options instead
of “ Handset Phonebook ” in step 2 above.
. Vehicle Phonebook
Select an entry stored in the Vehicle ’ s
Phonebook.
. Call History
Select an outgoing, incoming or missed
call downloaded from your cell phone
(depending on your phone ’ s compat-
ibility). . Dial Number
Input the phone number manually
using the keypad displayed on the
screen. (See “ How to use touch screen
(models with navigation system) ” (P.4-
5).)
SAA2525
RECEIVING A CALL GUID-FE730D1E-3F70-48A5-8B81-14DE254EC5A9
When you hear a phone ring, the display
will change to the incoming call mode. To
receive a call, perform one of the following
procedures listed below.
1. Select the “ Answer ” key.
2. Push the PHONE button on the instru-
ment panel.
3. Push the
button on the steering
wheel.
There are some options available when
receiving a call. Select one of the following
displayed on the screen.