2012 INFINITI G37 seat adjustment

Black plate (1,1)
Illustrated table of contents
0Safety — Seats, seat belts and supplemental restraint
system
1
Instruments and controls
Pre-driving checks and adjustments
Monitor, climate, audio, phone and voice recognition
systems
Starting and driving
In case of emergency
Appearance and care
Maintenance and do-it-yourself
Technical and consumer information
Index 2
3
4
5
6
7
8
9
10Table of
Contents
[ Edit: 2012/ 1/ 17 Model: V36-D ]

Black plate (24,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]1-2 Safety — Seats, seat belts and supplemental restraint system GUID-15F58BF2-1182-4C7C-8EA9-0FDFD873D801
SSS0133
WARNING. Do not ride in a moving vehicle when the
seatback is reclined. This can be danger-
ous. The shoulder belt will not be
against your body. In an accident, you
could be thrown into it and receive neck
or other serious injuries. You could also
slide under the lap belt and receive
serious internal injuries.
. For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the seat with both feet on the floor and
adjust the seat belt properly. See “ Pre-
cautions on seat belt usage ” (P.1-14).
. After adjustment, gently rock in the seat
to make sure it is securely locked.
. Do not leave children unattended inside
the vehicle. They could unknowingly
activate switches or controls. Unat-
tended children could become involved
in serious accidents.
. The seatback should not be reclined
further than necessary for comfort. Seat
belts are most effective when the pas- senger sits well back and straight up in
the seat. If the seatback is reclined, the
risk of sliding under the lap belt and
being injured is increased.
CAUTION When adjusting the seat positions, be sure
not to contact any moving parts to avoid
possible injuries and/or damages.SEATS

Black plate (25,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]FRONT SEATS GUID-D508833B-F102-47A6-A2B6-56CF07852D8B
Front power seat adjustment GUID-78261695-CA4C-40D0-8577-D5ACFE37E844
Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 sec-
onds, then reactivate the switch.
. Do not operate the power seat switch
for a long period of time when the
engine is off. This will discharge the
battery.
See “ Automatic drive positioner ” (P.3-31)
for the seat position memory function (if so
equipped). SSS1051
Forward and backward: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Moving the switch
* 1
forward or backward
will slide the seat forward or backward to
the desired position.
Reclining: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Move the recline switch
* 2
backward until
the desired angle is obtained. To bring the
seatback forward again, move the switch
* 2
forward.
The reclining feature allows adjustment of
the seatback for occupants of different
sizes for added comfort and to help obtain
proper seat belt fit. (See “ Precautions on
seat belt usage ” (P.1-14).) Also, the seat- back can be reclined to allow occupants to
rest when the vehicle is parked.
Safety — Seats, seat belts and supplemental restraint system
1-3

Black plate (31,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SSS0805
To return the seatback: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Fold up the rear seatback.
2. Securely lock the seatback in position.
HEAD RESTRAINTS GUID-8B531645-25BC-4652-833F-432615B358CE
WARNINGHead restraints supplement the other vehi-
cle safety systems. They may provide addi-
tional protection against injury in certain
rear end collisions. Adjust the head re-
straints properly, as specified in this sec-
tion. Check the adjustment after someone
else uses the seat. Do not attach anything to the head restraint stalks or remove the
head restraint. Do not use the seat if the
head restraint has been removed. If the
head restraint was removed, reinstall and
properly adjust the head restraint before an
occupant uses the seating position. Failure
to follow these instructions can reduce the
effectiveness of the head restraints. This
may increase the risk of serious injury or
death in a collision. SSS0989
The illustration shows the seating posi-
tions equipped with head restraints. The
head restraints are adjustable.
Indicates the seating position is
equipped with a head restraint.
Safety — Seats, seat belts and supplemental restraint system
1-9

Black plate (32,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]1-10 Safety — Seats, seat belts and supplemental restraint system SSS0992
Components GUID-DBDCC61D-24FD-4E47-A348-FDC0C6CDF960
1. Head restraint
2. Adjustment notches
3. Lock knob
4. Stalk SSS0997
Adjustment GUID-8B4E4C06-4D63-4200-A51B-5ED68936E652
Adjust the head restraint so the center is
level with the center of your ears. SSS0993
To raise the head restraint, pull it up.

Black plate (34,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]1-12 Safety — Seats, seat belts and supplemental restraint system SSS0996
Install GUID-A0266381-3929-4791-B5F4-7F6C9A04687C
1. Align the head restraint stalks with the
holes in the seat. Make sure that the
head restraint is facing the correct
direction. The stalk with the adjustment
notches
* 1
must be installed in the
hole with the lock knob
* 2
.
2. Push and hold the lock knob and push
the head restraint down.
3. Properly adjust the head restraint
before an occupant uses the seating
position. SSS0508
Front-seat Active Head Restraints GUID-5D9BA25C-DA31-49D7-B3FB-9413B1B21746
The Active Head Restraint moves forward
utilizing the force that the seatback re-
ceives from the occupant in a rear-end
collision. The movement of the head
restraint helps support the occupant ’ s
head by reducing its backward movement
and helping absorb some of the forces that
may lead to whiplash-type injuries.
Active Head Restraints are effective for
collisions at low to medium speeds in
which it is said that whiplash-type injury
occurs most.
Active Head Restraints operate only in certain rear-end collisions. After the colli-
sion, the head restraints return to their
original positions.
Adjust the Active Head Restraints properly
as described earlier in this section.

Black plate (41,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. Grasp the shoulder belt and pull
forward quickly. The retractor should
lock and restrict further belt movement.
If the retractor does not lock during this
check or if you have any question about
seat belt operation, see an INFINITI retailer.
SSS0687
Center of rear seat (Sedan) GUID-F8C852B7-8F2B-4F66-B9F1-740AF287A7F1
Selecting correct set of seat belts: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The center seat belt buckle is identified by
the CENTER mark
* A
. The center seat belt
tongue can be fastened only into the center
seat belt buckle. SSS0294A
Shoulder belt height adjustment
(for Sedan front seats) GUID-9DA0069A-F53D-4536-89F5-3F6983A3F7DF
The shoulder belt anchor height should be
adjusted to the position best for you. (See
“ Precautions on seat belt usage ” (P.1-14).)
To adjust, push the button
* A
, and then
move the shoulder belt anchor to the
desired position, so that the belt passes
over the center of the shoulder. The belt
should be away from your face and neck,
but not falling off of your shoulder. Release
the adjustment button to lock the shoulder
belt anchor into position.
Safety — Seats, seat belts and supplemental restraint system
1-19

Black plate (42,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]1-20 Safety — Seats, seat belts and supplemental restraint systemWARNING. After adjustment, release the adjustment
button and try to move the shoulder belt
anchor up and down to make sure it is
securely fixed in position.
. The shoulder belt anchor height should
be adjusted to the position best for you.
Failure to do so may reduce the effec-
tiveness of the entire restraint system
and increase the chance or severity of
injury in an accident. SSS0588
Shoulder belt arm (for Coupe front
seats) GUID-79A89F1D-4AEA-49A3-B52A-98FCD811131B
Before fastening the seat belt, pull the
shoulder belt arm forward until it clicks at
the lock position. The arm can also be
folded down for easier access for rear seat
passengers.
Pulling the arm forward will allow an easy
access to the belt. SEAT BELT EXTENDERS GUID-B1D92F02-3294-412F-84BF-88F73FEF6097
If, because of body size or driving position,
it is not possible to properly fit the lap-
shoulder belt and fasten it, an extender
that is compatible with the installed seat
belts is available that can be purchased.
The extender adds approximately 8 in (200
mm) of length and may be used for either
the driver or front passenger seating
position. See an INFINITI retailer for assis-
tance with purchasing an extender if an
extender is required.
WARNING . Only INFINITI seat belt extenders, made
by the same company which made the
original equipment seat belts, should be
used with the INFINITI seat belts.
. Adults and children who can use the
standard seat belt should not use an
extender. Such unnecessary use could
result in serious personal injury in the
event of an accident.
. Never use seat belt extenders to install
child restraints. If the child restraint is
not secured properly, the child could be
seriously injured in a collision or a