2012 INFINITI G37 battery

Black plate (20,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]0-14 Illustrated table of contents GUID-4EFFD432-519B-49EA-B9D3-B7E9FD7A6615
SDI2709
VQ25HR/VQ37VHR ENGINE GUID-2D649F04-F3DE-4C0A-877A-1F56F5C15998
1. Fuse/fusible link holder (P.8-24)
2. Battery (P.8-17)
3. Engine oil filler cap (P.8-11)
4. Brake fluid reservoir (P.8-15)
5. Clutch fluid reservoir (Manual Trans- mission models) (P.8-15)
6. Window washer fluid reservoir
(P.8-16)
7. Power steering fluid reservoir (P.8-14)
8. Air cleaner (P.8-21) 9. Radiator filler cap (P.8-9)
10. Drive belts (P.8-19)
11. Coolant reservoir (P.8-9)
12. Engine oil dipstick (for VQ37VHR
engine model) (P.8-11)
13. Engine oil dipstick (for VQ25HR en-
gine model) (P.8-11)ENGINE COMPARTMENT

Black plate (25,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]FRONT SEATS GUID-D508833B-F102-47A6-A2B6-56CF07852D8B
Front power seat adjustment GUID-78261695-CA4C-40D0-8577-D5ACFE37E844
Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 sec-
onds, then reactivate the switch.
. Do not operate the power seat switch
for a long period of time when the
engine is off. This will discharge the
battery.
See “ Automatic drive positioner ” (P.3-31)
for the seat position memory function (if so
equipped). SSS1051
Forward and backward: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Moving the switch
* 1
forward or backward
will slide the seat forward or backward to
the desired position.
Reclining: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Move the recline switch
* 2
backward until
the desired angle is obtained. To bring the
seatback forward again, move the switch
* 2
forward.
The reclining feature allows adjustment of
the seatback for occupants of different
sizes for added comfort and to help obtain
proper seat belt fit. (See “ Precautions on
seat belt usage ” (P.1-14).) Also, the seat- back can be reclined to allow occupants to
rest when the vehicle is parked.
Safety — Seats, seat belts and supplemental restraint system
1-3

Black plate (29,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]sion model ’ s driver ’ s seat) or the
parking brake is not applied (Manual
Transmission model ’ s driver ’ s seat).
. When the door is closed (automatic
forwarding only).
. While the automatic drive positioner
operates.
. When the automatic drive positioner
switches are pushed.
. When the seatback switch is pushed.
. When the seat position is adjusted.
Note that the seat must be moved to the
front-most position by operating the walk-
in function or the seat adjusting switches
after the battery is disconnected. Other-
wise, the seat will not move backward
during the walk-in function. REAR SEATS GUID-58068C6E-B055-4C8D-8938-1936BD5C8640
Folding (Coupe only) GUID-985B2C6A-D9B9-4CA7-BE2F-7414DF57F80E
WARNING . Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an
accident or sudden stop.
. Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. Do not place cargo higher than
the seatbacks. In a sudden stop or
collision, unsecured cargo could cause
personal injury.
. When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched posi-
tion. If they are not completely secured,
passengers may be injured in an acci-
dent or sudden stop.
. Closely supervise children when they are
around cars to prevent them from play-
ing and becoming locked in the trunk
where they could be seriously injured.
Keep the car locked, with the rear seatback and trunk lid securely latched
when not in use, and prevent children ’ s
access to car keys.
The rear seatback can be folded according
to the following procedure.
Safety — Seats, seat belts and supplemental restraint system
1-7

Black plate (100,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-22 Instruments and controlsINDICATORS FOR OPERATION GUID-3F80C245-4DDE-4CCD-9BA2-FE533BE15F57
1. Engine start operation indicator
(Automatic Transmission models) GUID-865F0D42-3E6C-4071-B120-AFF1A5EE4D2E
This indicator appears when the selector
lever is in the P (Park) position.
This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed.
2. Intelligent Key insertion indicator GUID-581E65CB-42A3-471E-923A-B9CDD6DBCCC9
This indicator appears when the Intelligent
Key needs to be inserted into the Intelli-
gent Key port. (For example, the Intelligent
Key battery is discharged.)
If this indicator appears, insert the Intelli-
gent Key into the Intelligent Key port in the
correct direction. (See “ Push-button igni-
tion switch ” (P.5-9).)
3. Intelligent Key removal indicator GUID-0F76AEA4-8CB1-4BBC-A994-137701CB6218
This indicator appears when the driver ’ s
door is opened with the ignition switch in
the OFF or LOCK position and the Intelli-
gent Key placed in the Intelligent Key port.
A key reminder chime also sounds.
If this indicator appears, remove the
Intelligent Key from the Intelligent Key port
and take it with you when leaving the vehicle.
4. NO KEY warning GUID-B266EC58-8CB6-45C9-B5B7-7FF3A17CB567
This warning appears in either of the
following conditions.
No key inside the vehicle: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The warning appears when the door is
closed with the Intelligent Key left outside
the vehicle and the ignition switch in the
ACC or ON position. Make sure that the
Intelligent Key is inside the vehicle.
Unregistered Intelligent Key: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The warning appears when the ignition
switch is pushed from the LOCK position
and the Intelligent Key cannot be recog-
nized by the system. You cannot start the
engine with an unregistered key. Use the
registered Intelligent Key.
See “ Intelligent Key system ” (P.3-7) for
more details.
5. SHIFT “ P ” warning (Automatic
Transmission models) GUID-9BDEFCBE-BD2F-42CF-B3EF-1A2E660B253C
This warning appears when the ignition
switch is pushed to stop the engine with
the selector lever in any position except
the P (Park) position.
If this warning appears, move the selector lever to the P (Park) position or push the
ignition switch to the ON position.
An inside warning chime will also sound.
(See “ Intelligent Key system ” (P.3-7).)
6. “ PUSH ” warning (Automatic
Transmission models) GUID-C4F385F1-244F-4AA8-A2FB-F05B8CE33F2B
This warning appears when the selector
lever is moved to the P (Park) position with
the ignition switch in the ACC position after
the SHIFT “ P ” warning appears.
To push the ignition switch to the OFF
position, perform the following procedure:
SHIFT “ P ” warning ? (Move the selector
lever to “ P ” ) ? PUSH warning ? (Push the
ignition switch ? ignition switch position
is turned to ON) ? PUSH warning ? (Push
the ignition switch ? ignition switch
position is turned to OFF)
7. Intelligent Key battery discharge
indicator GUID-27367EF5-F931-4EBC-8576-1379DE51DE47
This indicator appears when the Intelligent
Key battery is running out of power.
If this indicator appears, replace the
battery with a new one. (See “ Intelligent
Key battery replacement ” (P.8-26).)

Black plate (115,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]Battery saver system GUID-015F3DAF-8A59-4727-BB76-C11FB41B2B60
A chime will sound when the driver side
door is opened with the light switch in the
or position and the ignition switch
in the ACC, OFF or LOCK position.
When the headlight switch is in the
or
position while the ignition switch is in
the ON position, the lights will automati-
cally turn off 5 minutes after the ignition
switch has been pushed to the OFF
position.
When the headlight switch remains in the
or position after the lights
automatically turn off, the lights will turn
on when the ignition switch is pushed to
the ON position.
CAUTION. When you turn on the headlight switch
again after the lights automatically turn
off, the lights will not turn off auto-
matically. Be sure to turn the light
switch to the OFF position when you
leave the vehicle for extended periods of
time, otherwise the battery will be
discharged. . Never leave the light switch on when the
engine is not running for extended
periods of time even if the headlights
turn off automatically.
Daytime running light system (Ca-
nada only) GUID-84A2F990-744E-4ADE-B431-E99613FFC97F
The daytime running lights automatically
illuminate when the engine is started with
the parking brake released. The daytime
running lights operate with the headlight
switch in the OFF position or in the
position. Turn the headlight switch to the
position when driving at night.
If the parking brake is applied before the
engine is started, the daytime running
lights do not illuminate. The daytime
running lights illuminate once the parking
brake is released. The daytime running
lights will remain on until the ignition
switch is pushed to the OFF position. SIC3257
Instruments and controls
2-37

Black plate (118,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-40 Instruments and controls GUID-9C1E6002-FE1D-4E74-971F-A1B3941CE624
SIC3312
To sound the horn, push the center pad
area of the steering wheel.
WARNINGDo not disassemble the horn. Doing so
could affect proper operation of the supple-
mental front air bag system. Tampering with
the supplemental front air bag system may
result in serious personal injury. GUID-DD74E04E-57D9-472E-AB2F-AEAAA9BBBD37
WARNING Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or have
an inability to feel pain in body parts that
contact the seat. Use of the seat heater by
such people could result in serious injury.
CAUTION . The battery could run down if the seat
heater is operated while the engine is
not running.
. Do not use the seat heater for extended
periods or when no one is using the
seat.
. Do not put anything on the seat which
insulates heat, such as a blanket,
cushion, seat cover, etc. Otherwise, the
seat may become overheated.
. Do not place anything hard or heavy on
the seat or pierce it with a pin or similar
object. This may result in damage to the
heater. . Any liquid spilled on the heated seat
should be removed immediately with a
dry cloth.
. When cleaning the seat, never use
gasoline, thinner, or any similar materi-
als.
. If any abnormalities are found or the
heated seat does not operate, turn the
switch off and have the system checked
by an INFINITI retailer.HORN HEATED SEATS (if so equipped)

Black plate (121,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]GUID-B26334D9-D8B8-436D-BBEA-461C2F9C02D3
JVI0329X
Automatic transmission models
SIC4684
Manual transmission models SIC4316
Automatic transmission models
The power outlet is located in the center
console and storage box (if so equipped).
CAUTION . The outlet and plug may be hot during or
immediately after use.
. Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do
not use double adapters or more than
one electrical accessory.
. Use power outlet with the engine run-
ning to avoid discharging the vehicle
battery. . Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
. This power outlet is not designed for use
with a cigarette lighter unit.
. Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may blow.
. Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
. When not in use, be sure to close the
cap. Do not allow water to contact the
outlet.
Instruments and controls
2-43POWER OUTLET

Black plate (132,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-54 Instruments and controlsAuto reverse function GUID-A9F7D9E8-291F-4771-BC07-683BFB01C2A0
WARNINGThere are some small distances immediately
before the closed position which cannot be
detected. Make sure that all passengers
have their hands, etc., inside the vehicle
before closing the window.
If the control unit detects something
caught in the window as it is closing, the
window will be immediately lowered.
The auto reverse function can be activated
when the window is closed by automatic
operation when the ignition switch is in the
ON position or for 45 seconds after the
ignition switch is pushed to the OFF
position.
Depending on the environment or driving
conditions, the auto reverse function may
be activated if an impact or load similar to
something being caught in the window
occurs. Automatic adjusting function
(Coupe) GUID-D2D30762-25BF-4EE0-B27E-BB7D8BB3ADD2
CAUTION When the battery cable is removed from the
battery terminal, do not close either of the
front doors. The automatic window adjust-
ing function will not work and the side roof
panel may be damaged.
The power window has an automatic
adjusting function. When the door is being
opened, the window is automatically low-
ered slightly to avoid contact between the
window and the side roof panel. When the
door is closed, the window is automatically
raised slightly.
While the automatic adjusting function
does not work, the window will be con-
trolled as follows:
. When the door is opened, the window
lowers for approximately 2 seconds.
. While the door is open, the window
cannot be raised. If the windows do not close auto-
matically GUID-AF6C72A6-6B0C-4A7D-ACDE-4A4B5C42D7AE
If the power window automatic function
(closing only) does not operate properly,
perform the following procedure to initi-
alize the power window system.
1. Push the ignition switch to the ON
position.
2. Close the door.
3. Open the window completely by oper-
ating the power window switch.
4. Pull the power window switch and hold
it to close the window, and then hold
the switch more than 3 seconds after
the window is closed completely.
5. Release the power window switch.
Operate the window by the automatic
function to confirm the initialization is
complete.
6. Perform steps 2 through 5 above for
other windows.
If the power window automatic function
does not operate properly after performing
the procedure above, have your vehicle
checked by an INFINITI retailer.