Malfunction IndicatorsIf an indicator remains on, there may be a problem; see a dealer.
On/Off Indicators
Condition IndicatorsAction is needed by driver.
SIDE AIRBAGOFF
CRUISE CONTROLon*
VSAOFF*Exterior lightson
Turn signals/hazardsonAuto Idle Stopon(blinking)
ECON modeon
High beamson
*ifequipped
Charging system
Low brake fluid, Brake system
Low oil pressure
ABS(anti lock brake system)
Low tire pressureon:Add air
Message indicator: See MID
High temperature indicator:Pull over and cool downengine
IMA system
Malfunction indicator lamp(check engine light)
VSA®(vehicle stability assist)*SRS(supplemental restraint system)
EPS(electronic power steering)
Low temperature
TPMS (blinks and stays on)(tire pressure monitoring system)
Parking brake on:Release
Door/Hatch open:Close door(s) / hatch
Seat belt reminder:Fasten seat belt(s)
Low fuel:Refill
INSTRUMENT PANEL INDICATORS
Immobilizer Flashes: improperly coded key;use correct key
Briefly appear with each engine start. Red and amber indicators are most critical. Blue
and green indicators are used for general information.
45
CRUISE MAINon*
PASSENGER AIRBAGOFF(center audio panel)
Brake system
12 Insight TRG:ATG_NEW STYLE 8/9/2011 1:29 PM Page 4
\f2\f3
Paddle Modes
P A D D L E S H I F T I N G( i f e q u i p p e d )
Manually shift your vehicle’s speeds up or down. Useful for engine braking, when
driving in hilly terrain, or cornering.
Pull (\b) to shift down. Pull(
+ ) to shift up.
D Paddle Shift Mode
•
Shift into Drive (D).
• Pull (+) or (\b) to temporarily switch from
automatic to manual shift mode.
• The speed number is displayed on the shift indicator.
• When the vehicle’s speed is constant, the mode returns to automatic.
7 Speed Manual Shift Mode
•Shift into Sport (S).
• Pull (+) or (\b) to switch to manual shift mode.
• The M indicator and speed number are displayed on the shift indicator.
• Pull and hold (+) to cancel this mode.
L (Low) Mode
•Pull and hold (+) and (\b) at the same time
until L is displayed on the shift indicator.
• Use this mode to get higher torque when climbing steep hills.
• Pull and hold again to cancel this mode.
How It Works
T I R E P R E S S U R E M O N I T O R I N G S Y S T E M ( T P M S )
Monitors the vehicle’s tire pressures.
Each tire valve stem
contains a TPMS sensor.
When the tire pressure drops
significantly below
recommended levels, the low
tire pressure indicator comes
on and “CHECK TIRE
PRESSURE” appears on the MID.
What to Do
\f. Visually inspect the tires for
damage.
2. Use a tire air pressure gauge to
check which tire(s) have low
pressure.
3. Inflate the tire(s), if necessary,
to the recommended pressures
listed on the label on the
driver’s doorjamb.
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f38 AM Page 8
