Default Lock/Unlock Setting
Default Lock Setting
All doors and the hatch are preset
to lock when your vehicle reaches
about \f0 mph.
Programmable Auto Door Lock/Unlock Settings
Below are the different programmable options you can choose. See your Owner’s
Manual for additional instructions on programming these settings.
Default Unlock Setting
Only the driver’s door and the
hatch are preset to unlock when
you shift into Park (P).
23
AUTO DOOR UNLOCK
Auto Unlock
(all doors and hatch)
When you turn
the ignition OFFWhen you shift into Park
Auto Unlock
(only driver’s door andhatch)
When you turn
the ignition OFFWhen you shift into Park
Turn off
Auto Unlock
Operate manually
AUTO DOOR LOCK
Auto Lock
When you
reach \f0 mphWhen you shift out of Park
Turn off
Auto Lock
Operate manually
Programming the Auto Door Unlock Setting
Press and hold either Info ( / ) button on the steering wheel to activate the
“Customize Settings” display on the MID, then pressSEL/RESET to activate the menu.
\f. Select “CHG SETTING.”
2.Select “DOOR SETUP.”
3. Select “AUTO DOOR UNLOCK.” 4.
Select “ALL DOORS WITH
SHIFT TO P.”
5. The display returns to the AUTO DOOR UNLOCK menu.
A U T O D O O R L O C K S
Program how and when the vehicle doors automatically lock and unlock.
F U E L F I L L D O O R
Opening and Closing the Fuel Fill Door
To open, push and release the fuel
door in the area shown until it pops
open.To close, pushthe fuel door until it
is flush with the body.
Easy\bto\bopen fuel door keeps your fuel cap covered.
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f35 AM Page 3
V O I C E R E C O G N I T I O N( i f e q u i p p e d )To keep your eyes on the road and hands on the wheel, use voice commands for
hands\bfree calling, navigation, audio, and climate control. For a full list of all system
commands, say“Information” and “Voice Command Help. ”
Key Functions by Voice Command
B L U E T O O T H®H A N D S F R E E L I N K®p. 23
A U D I Op.\f9
C L I M A T Ep .\f9
N A V I G A T I O Np. 20
Voice Command Tips
• Press and release the Talk button, wait for a beep, then give a command.
• All available voice commands are highlighted in blue when you press the Talk button.
• For a list of available commands, press and releasethe Talk button and say
“Help” at any time.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
• The system also uses a touch screen display. You can select options or icons by touching them on the screen. This is limited while the vehicle is moving.
Pick Up button\f Answer an incoming call,
or go directly to the Phone screen.
Talk button\f Give navigation, HFL, audio
or climate control commands.
Hang Up button\f End a call or decline a
call.
Back button\f Cancel a command and
return to the previous screen.
\f4\f5
Control four different systems with the steering wheel buttons and the ceiling
microphone.
To prevent driver distraction, certain manual and touch screen functions
may be inoperable or grayed out while the vehicle is moving. Voice
commands are always available.
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f39 AM Page 9
303\f
PlayingBluetoothAudio Files
BLUETOOTH®AUDIO( i f e q u i p p e d )
Play stored or streaming audio from your compatible phone through your vehicle’s audio
system. Visit handsfreelink.honda.com to check if this feature is available on your phone.
\f. Make sure your phone is on and
paired to Bluetooth®HandsFreeLink®
(seepage 26 ).
3. Press “play” on your phone; sound is
redirected to the audio system.
4. Press the( )or( )buttons to
change tracks, or use the(+) or (\b)buttons on the steering wheel.
2. Press MODE or CD/AUX until
Bluetooth Audio mode appears.
Notes\f
• Make sure the volume on your phone is properly adjusted.
• You may need to enable additional Bluetoothsettings on your phone for
playback.
• The play/pause function and remote audio controls may not be supported on all phones.
i P o d®O R U S B F L A S H D R I V E
Play audio files from your compatible iPod or USB flash drive through your vehicle’s
audio system.
Connecting Devices and Playing Audio Files
\f. Pull out the USB adapter cable from
the center console.
2. Connect the USB connector to your
iPod dock connector or flash drive.
with navigation
iPod is a registered trademark of Apple Computer, Inc ., registered in the U.S. and other countries. iPod not included.
4. Press the (|
) or ( |) buttons to
change tracks, or pressthe (+) or (\b)
buttons on the steering wheel.
with navigation3. Press AUX or CD/AUX until iPod
or USB mode appears. Audio begins
to play.
without navigation
without navigation
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f42 AM Page 17
