2012 FORD FUSION (AMERICAS) Owners Manual

Page 97 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual Create a MyKey
To program MyKeyon one of the keys programmed to the vehicle,
insert the key that you want to make a MyKeyinto the ignition. Turn
the ignition on. Use the message center buttons to d

Page 98 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual Clear MyKey
To reset all MyKeysas admin keys, do the following:
1. Turn the vehicle on using the admin key.
2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
3. Press and release the RES

Page 99 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual Note:For all vehicles, the number of MYKEY(S) PROGRAMMED or
ADMIN KEYS PROGRAMMED that is displayed in the MyKeysystem
status menus will include the remote start system as an additional key in
the to

Page 100 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual Condition Potential Causes
Cannot clear MyKey•Key in the ignition is a MyKey
•No MyKeysare programmed to the
vehicle. Refer toCreate a MyKey
section
•Vehicle has been started using a
remote

Page 101 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual POWER DOOR LOCKS
•Press the
control to unlock all
doors.
•Press the
control to lock all
doors.
Smart locks
This feature attempts to help prevent you from locking yourself out of
the vehicle if you

Page 102 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual Deactivating/activating autolock feature
Your vehicle comes with the autolock features activated; there are four
methods to enable/disable this feature:
•Through your authorized dealer,
•by using

Page 103 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual Keyless entry keypad procedure
1. Turn the ignition to the 1 off
position.
2. Close all the doors.
3. Enter factory–set 5–digit entry
code.
4. Press and hold the 3•4. While holding the 3•4pres

Page 104 of 370

FORD FUSION (AMERICAS) 2012 1.G Owners Manual Power door unlock/lock procedure
Before starting, ensure the ignition is in the off position and all vehicle
doors are closed. You must complete Steps 1–5 within 30 seconds or the
procedure will hav