Page 47 of 287

43
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
Mirror folding with electrical adjustment
fig. 42-43
(for versions/markets, where provided)
When required (for example when the mirror causes
difficulty in narrow spaces or during an automatic car
wash) it is possible to fold the mirrors both electrically
and manually moving them from position 1-fig. 42 to
position 2. To adjust the mirror, place the knob B in one of the
four positions: ÿ1 left mirror,
⁄2 right mirror ¤3 left wide angle,
Ÿ4 right wide angle.
After rotating the knob B on the mirror to be adjusted,
move it in the direction shown by the arrows to adjust
the selected glass.
Mirror folding with manual adjustment fig. 42
When required (for example when the mirror causes
difficulty in narrow spaces or during an automatic car
wash) it is possible to fold the mirrors manually moving
them from position 1 to position 2.
If the mirror has been accidentally rotated forwards
(position 3), for example due to an impact, it must be
manually returned to position 1.
When driving the mirrors should always
remain in position 1.
WARNING
F0N0023mfig. 42F0N0159mfig. 43
Page 48 of 287

44
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
To bring the mirrors to the opening position electrically,
press point 2 of the rocker button A-fig. 43 until an
engagement “click” is heard, then press point 1 of the
button.
IMPORTANT If the mirrors have been manually folded
by mistake to position 3 – fig. 42, the mirror moves to
an intermediate position. In this case, manually rotate
the mirror to position 1, then press point 2 of the
rocker button A-fig. 43 to return the mirror to position
2 until a “click” is heard, then press point 1 of the
button to bring it back to position 1.
Defrosting/demisting
(for versions/markets where provided)
The mirrors are fitted with resistors that are activated
when the heated rear windscreen is turned on (by
pressing button
().
IMPORTANT This function is timed and it will turn off
automatically a few minutes later. Electric folding
To fold the mirrors electrically, press point 2 of the
rocker button A-fig. 43. To bring the mirrors back to
the open position, press point 1 of the button.
IMPORTANT If the mirrors are folded electrically, they
should be returned to the open position electrically: do
not try to return the mirrors manually to driving
position.
Manual folding
To fold the mirrors manually, move them from position
1-fig. 42 to position 2. If the mirrors are folded
manually, they can be returned to the open position
both manually and electrically.
IMPORTANT To bring the mirrors electrically to the
opening position, press point 2 of the rocker button
A-fig. 43 until an engagement “click” is heard, then press
again point 1 of the button again.
Folding forwards
The mirrors can be manually folded forwards (position
3-fig. 42) or brought to the opening position 2 again
manually if they have been accidentally rotated forwards
(for example due to an impact).
If the mirrors have been rotated forwards manually or
due to an impact, they can be returned to the open
position both manually and electrically.
Page 49 of 287
45
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 44
F0N0322m
HEATING AND VENTILATION SYSTEM
1. Upper fixed vent – 2. Adjustable centre vents – 3. Fixed side vent – 4. Adjustable side vents – 5. Lower vents for
front seats.
Page 50 of 287
46
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
F0N0026mfig. 45
F0N0027mfig. 46F0N0514mfig. 47
D Adjustable centre vents.
E Air flow adjustment control.
The vents A and C cannot be adjusted.
CONTROLS fig. 47
Air temperature adjustment ring nut A
(mixing hot/cold air)
Red section = hot air
Blue section = cold air
Knob B activates/adjusts the fan
p0 = fan off
1-2-3 = fan speed
4
-= maximum fan speed ADJUSTABLE SIDE AND CENTRE VENTS
fig. 45-46
A Fixed vents for side windows.
B Adjustable side vents.
C Fixed vents.
Page 51 of 287

47
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
PASSENGER COMPARTMENT HEATING
Proceed as follows:
❒turn the ring nut A to the red section;
❒turn the ring nut C to the required position;
❒turn the knob B to the required speed.
FAST PASSENGER COMPARTMENT
HEATING
For the fast heating of the passenger compartment,
proceed as follows:
❒turn the ring nut A to the red section;
❒switch on the air recirculation by turning the knob D
to
Ò;
❒turn the ring nut C to ©;
❒turn the knob B to 4-(max. fan speed).
Then use the controls to maintain the required comfort
conditions and turn the knob D to
Úto turn the air
recirculation off and to prevent misting.
IMPORTANT With cold engine, you have to wait for
a few minutes to let the system fluid reach the operating
temperature. Air distribution ring nut C
¶to direct air to the centre and side vents;
ßto send air to the feet and direct cooler air to the
dashboard vents, in intermediate temperature
conditions;
©for heating when the outside temperature is very
low: to direct as much air as possible to the feet;
®to warm the feet and, at the same time, demist the
windscreen;
-for quick windscreen demisting.
Air recirculation on/off knob D
When the knob D is turned to
Òthe internal air
recirculation is activated.
When the knob D is turned to
Úthe internal air
recirculation is deactivated.
PASSENGER COMPARTMENT VENTILATION
To ventilate the passenger compartment well, proceed
as follows:
❒turn the ring nut A to the blue section;
❒switch off the air recirculation by turning the knob D
to
Ú;
❒turn the ring nut C to ¶;
❒turn the knob B to the required speed.
Page 52 of 287

48
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
F0N0500mfig. 48
Window demisting
In the event of considerable external moisture and/or rain
and/or large differences in temperature inside and outside
the passenger compartment, perform the following
preventive window demisting procedure:
❒turn the ring nut A to the red section;
❒switch off the air recirculation by turning the knob D
to
Ú;
❒turn the ring nut C to -or to ®if the windows
do not demist;
❒turn the knob B to the 2ndspeed.
HEATED REAR WINDSCREEN AND DOOR
MIRRORS DEMISTING/DEFROSTING fig. 49
(for versions/markets where provided)
Press the button A to activate this function; when this
function is on the warning light in the button comes on.
This function is timed and will turn off automatically
after 20 minutes. Press the button A again to switch the
function off.
IMPORTANT Do not apply stickers to the inside of the
rear window over the heating filaments to avoid damage
that might cause it to stop working properly. FRONT WINDOW FAST
DEMISTING/DEFROSTING (WINDSCREEN
AND SIDE WINDOWS)
Proceed as follows:
❒turn the ring nut A to the red section;
❒switch off the air recirculation by turning the knob D
to
Ú;
❒turn the ring nut C to -;
❒turn the knob B to 4 -(max. fan speed).
IMPORTANT To ensure fast demisting/defrosting,
if a supplementary heater is present (under the front or
rear seat for Panorama and Combi versions), if on, turn
off using button F (LED off) located on the control panel
fig. 48.
After demisting/defrosting, operate the controls to
restore the required comfort conditions.
Page 53 of 287

49
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
F0N0043mfig. 49
MANUAL CLIMATE CONTROL
SYSTEM
(for versions/markets where provided)
CONTROLS fig. 50
Air temperature adjustment ring nut A
(mixing hot/cold air)
Red section = hot air
Blue section = cold air
Knob B activates/adjusts the fan
p0 = fan off
1-2-3 = fan speed
4
-= maximum fan speed INTERNAL AIR RECIRCULATION
ACTIVATION
Turn the knob D-fig. 47 to
Ò.
It is advisable to switch the internal air recirculation on
while standing in queues or in tunnels to prevent the
introduction of polluted air. Do not use the function for
a long time, particularly if there are many passengers on
board, to prevent the windows from misting up.
IMPORTANT The inside air recirculation system makes
it possible to reach the required heating or cooling
conditions faster.
Do not use the air recirculation function on rainy/cold
days as it would considerably increase the possibility of
the windows misting up.
F0N0514mfig. 50
Page 54 of 287

50
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
Air distribution ring nut C
¶to direct air to the centre and side vents;
ßto send air to the feet and direct cooler air to the
dashboard vents, in intermediate temperature
conditions;
©for heating when the outside temperature is very
low: to direct as much air as possible to the feet;
®to warm the feet and, at the same time, demist the
windscreen;
-for quick windscreen demisting.
Air recirculation on/off knob D
Press the button (button LED on) to turn the internal
air recirculation on.
Press the button again (button LED off) to turn the
internal air recirculation off.
Climate control system on/off button E
Press the button (button LED on) to turn the climate
control system on.
Press the button again (button LED off) to turn the
climate control system off.PASSENGER COMPARTMENT VENTILATION
To ventilate the passenger compartment well, proceed as
follows:
❒turn the ring nut A to the blue section;
❒switch off the air recirculation by turning the knob D
to
Ú;
❒turn the ring nut C to ¶;
❒turn the knob B to the required speed.
CLIMATE CONTROL SYSTEM (cooling)
For fast cooling of the passenger compartment, proceed
as follows:
❒turn the ring nut A to the blue section;
❒switch on the air recirculation by turning the knob D
to
Ò;
❒turn the ring nut C to ¶;
❒press the button E to turn the climate control
system on; the LED in the button E will come on;
❒turn the ring nut B to 4-(max. fan speed).