2012 FIAT 500 ABARTH audio

Mobile phones with message reader (not all
mobile phones support reading incoming SMS
messages)
If your mobile phone can send messages through the
Bluetoothwireless technology, it is possible to read
incoming messages using theBLUE&ME™Hands-Free
Communication Package, to store them in the dedicated
inbox or to delete them.
Supported USB Memory Devices
USB Memory Devices
The media player supports most USB memory devices.
1.0, 1.1 or 2.0.
NOTE:It is not possible to use USB devices equipped
with a “password” function.
Supported digital audio files
The media player supports audio files with the following
formats:
Extension Audio Coding
.wma Windows Media Audio Decode
(Format Tag: WMA2 = 353,
WMA1=352) Decodes all CBR pro-
files from 5kbps to 192kbps, 8kHz
to 48kHz, mono and stereo De-
codes all v9 CBR profiles, from
5kbps to 320kbps, 8kHz to 48kHz,
mono and stereo Decodes all qual-
ity based, bit rate based and peak
constrained VBR profiles Supports
WMA v1 and WMA v2 bit streams
70 BLUE&ME™ User’s Manual

Extension Audio Coding
.mp3 MP3 in two forms: MPEG-1 Layer
3 (sampling rates 32 kHz, 44.1 kHz
and 48 kHz) and MPEG-2 Layer 3
(16 kHz, 22.05 kHz and 24 kHz).
Supports the proprietary Fraun-
hofer extension called “MP2.5”,
which adds even lower sampling
rates (8 kHz, 11.025 kHz and
12 kHz). ISO compliance with the
following bitrates (kbps): 16, 32,
64, 96, 128, 192. Both Mono and
Stereo. And Layer 3, VBR and CBR
support.
.wav Digital audio file, without data
compression.
.aac MPEG-4, M4A support Sampling
rates: 8, 11, 16, 22, 24, 32, 44,
48 kHz Bitrates: 16, 32, 48, 64, 80,
96, 112, 128, 160, 192, 224, 256 kbpsNOTE:The media player does not support audio files
compressed with other formats and DRM (Digital Right
Management) protected audio files. Non-supported au-
dio files that may be present on the USB device will be
ignored.
1
BLUE&ME™ User’s Manual 71

Problem Probable Cause Possible SolutionWhen in close proximity of the car,
answering a phone call directly
using the mobile phone “answer”
button, will automatically activate
the hands-free communication
function (the caller ’s voice is
played through the car speakers)•Some types of mobile phones re-
quire you to set the phone to
choose between automatic incoming
call transfer to the system or non-
automatic incoming call transfer
(you will transfer the call using the
mobile phone keypad, as required)•Refer to your mobile phone owner ’s
manual to find out how to set up
the default location for phone audio
when a phone call is received
Pairing a paired mobile phone,
the display screen shows: Pair.
failed and the system says “Pair-
ing unsuccessful. Please try
again.”•Before re-pairing with a mobile
phone, information from the previ-
ous pairing onBLUE&ME™must
be deleted•Remember that the pairing proce-
dure will only need to be per-
formed once for your mobile phone.
After this procedure,BLUE&ME™
will automatically connect to your
phone each time you get into the
car and turn the ignition key to ON
•To pair the phone again, select DE-
LETE USERS and then re-pair the
phone – see the section SETTING
FUNCTIONS - MANAGING USER
DATA AND PHONEBOOK and also
the section SETTING FUNCTIONS -
PAIRING YOUR MOBILE PHONE1
BLUE&ME™ User’s Manual 89

Problem Probable Cause Possible Solution
BLUE&ME™stopped receiving
messages from your cellular tele-
phone•You may have set the notification
type to Reader Off by mistake•Set, on menu notification settings,
either AUDIO + VISUAL notifica-
tion or VISUAL NOT notification
– refer to READER FUNCTIONS
SMS MESSAGES, NOTIFICATION
SETTINGS paragraph
Problem Probable Cause Possible Solution
You cannot display some SMS mes-
sages, present on your cellular tele-
phone, onBLUE&ME™SMS mes-
sage list•BLUE&ME™is capable of read-
ing and storing the last 20 re-
ceived SMS messages while the
telephone set is connected to the
system. Messages received while
not connected to the system are
not transferred toBLUE&ME™•SMS messages stored by
BLUE&ME™can be deleted –
refer to READER FUNCTIONS
SMS MESSAGES, SMS MES-
SAGES MANAGEMENT AND
DELETING ALL SMS MESSAGES
paragraphs
92 BLUE&ME™ User’s Manual

Media Player
Problem Probable Cause Possible Solution
Displayed message: NO MEDIA
andBLUE&ME™says: “No media
found”•No USB device is connected to the
USB port in the car
•No digital audio files are stored
on the USB memory device
•If power is interrupted, (e.g., car
battery disconnection),
BLUE&ME™will rebuild the me-
dia library•Connect your USB device to
BLUE&ME™
•Store digital audio files on your
USB memory devices following
the instructions given by your
media file software
•Remove the USB device from the
USB port and replace it to rebuild
the media library again
•Check whether your USB device
is supported byBLUE&ME™
After connecting your USB device
and turning the ignition key to ON,
no music is played•Autoplay may be set to off•Set Autoplay to on, remove and
then replace the USB device
•Press the
button and say
“PlayMedia playback should
start
94 BLUE&ME™ User’s Manual

Problem Probable Cause Possible Solution
Displayed message: EMPTY PLAY-
LIST andBLUE&ME™says:
“Empty playlist”•No media file information is con-
tained in the playlist
•The.wpl file has exceeded the
BLUE&ME™300 kb memory
capacity limit
•The playlist does not contain ref-
erences to media files on your
USB device•Delete the playlist from your USB
device or copy media files to the
playlist using your media file soft-
ware
•Reduce the number of tracks in the
playlist, using your media file soft-
ware
Problem Probable Cause Possible Solution
Displayed message: FILE ERROR•One or more digital audio files
are damaged or invalid•Delete bad media from your USB
device
Displayed message: PROTECTED
andBLUE&ME™says: “Protected
content”.•The track selected is DRM-
protected and it cannot be
played by the media player•In this case nothing can be done
96 BLUE&ME™ User’s Manual

Problem Probable Cause Possible Solution
BLUE&ME™does not play all
the digital audio files in the play-
list•Your playlist contains DRM-
protected files that cannot be
played, or it contains references to
invalid media files•For further details refer to “SUP-
PORTED USB MEMORY DE-
VICES”
The media library does not show
all the digital audio files stored
on the USB device•Your playlist contains DRM pro-
tected files that are ignored during
playback
•Your playlist contains more than
20,000 tracks, that is the maximum
number of files that can be copied
to the media library
•The playlist stored on your USB
device contains more than 20
nested folders. Nested folders files
will not be copied to the media
library•Reduce the number of tracks on
the USB device.
•Reduce the number of nested fold-
ers on the USB device
1
BLUE&ME™ User’s Manual 97

UPGRADES AND RECOVERY MEDIA

If the SOFTWARE is provided by FIAT Auto S.p.A.
separate from the DEVICE on media such as a ROM
chip, CD ROM disk(s) or via web download or other
means, and is labeled “For Upgrade Purposes Only”
you may install one (1) copy of such SOFTWARE onto
the DEVICE as a replacement copy for the existing
SOFTWARE, and use it in accordance with this EULA,
including any additional EULA terms accompanying
the upgrade SOFTWARE.
INTELLECTUAL PROPERTY RIGHTS
All title and intellectual property rights in and to the
SOFTWARE (including but not limited to any images,
photographs, animations, video, audio, music, text and
“applets,” incorporated into the SOFTWARE), the accom-
panying printed materials, and any copies of the SOFT-
WARE, are owned by FIAT Auto S.p.A.’s Software Sup-
pliers, their affiliates or suppliers. The SOFTWARE islicensed, not sold. You may not copy the printed materi-
als accompanying the SOFTWARE. All title and intellec-
tual property rights in and to the content which may be
accessed through use of the SOFTWARE is the property
of the respective content owner and may be protected by
applicable copyright or other intellectual property laws
and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this
EULA are reserved by FIAT Auto S.p.A.’s Software
Suppliers, their affiliates and suppliers. Use of any on-
line services which may be accessed through the SOFT-
WARE may be governed by the respective terms of use
relating to such services. If this SOFTWARE contains
documentation that is provided only in electronic form,
you may print one copy of such electronic
documentation.
EXPORT RESTRICTIONS
You acknowledge that the SOFTWARE is subject to U.S.
and European Union export jurisdiction. You agree to
106 BLUE&ME™ User’s Manual