2012 DODGE CHARGER SRT Owners Manual

Page 377 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual Electronic Stability Control (ESC)
This system enhances directional control and stability of
the vehicle under various driving conditions. The ESC
corrects for oversteering and understeering the vehic

Page 378 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual ESC Operating Modes
The ESC system has three available operating modes:
ESC On
This is the normal operating mode for the ESC. When-
ever the vehicle is started, the ESC system will be in this
mode. Th

Page 379 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual WARNING!
When in “Partial Off” mode, the TCS portion of ESC,
except for the limited wheel slip feature described in
the TCS section, has been disabled. All other stabil-
ity features of ESC functi

Page 380 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual NOTE:When the ESC is switched OFF, a feature of the
system remains active. This feature controls wheel spin
across an axle quite similarly to a limited slip differential.
If one wheel on an axle is sp

Page 381 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual •Gear selection matches vehicle uphill direction (i.e.,
vehicle facing uphill is in forward gear; vehicle back-
ing uphill is in REVERSE gear).
HSA will work in REVERSE and all forward gears when
th

Page 382 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual Ready Alert Braking
Ready Alert Braking may reduce the time required to
reach full braking during emergency braking situations.
It anticipates when an emergency braking situation may
occur by monitori

Page 383 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual Malfunction Indicator Light” begins to flash during ac-
celeration, ease up on the accelerator and apply as little
throttle as possible. Be sure to adapt your speed and
driving to the prevailing roa

Page 384 of 546

DODGE CHARGER SRT 2012 7.G Owners Manual TIRE SAFETY INFORMATION
Tire MarkingsNOTE:
•P (Passenger) - Metric tire sizing is based on U.S.
design standards. P-Metric tires have the letter “P”
molded into the sidewall preceding the size d