2012 Citroen C4 PICASSO RHD Owner's Manual

XI
191
PRACTICAL INFORMATION

Main beam headlamps


)
Remove the rubber cover.

)
Detach the clips by lowering
them on each side of the bulb.

)
Pull on the bulb-holder to remove it.

)
Replace the faulty bulb.

)
Push the bulb-holder back into
its housing.

)
Reattach the clips.

)
Refi t the rubber cover.


Dual-function Xenon headlamps
(dipped/main beam)

Additional main beam headlamps


)
Remove the rubber cover.

)
Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.

)
Replace the faulty bulb.

)
Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.

)
Refi t the rubber cover.

If the headlamp bears this
symbol, any operation to
change the Xenon dual-
function directional head-
lamp (D1S-35 W) must be carried
out by professionals (risk of elec-
trocution).

Contact a CITROËN dealer or a
qualifi ed workshop.
It is recommended to change both
bulbs at the same time if one of
them is faulty.









Dipped beam headlamps


)
Remove the rubber cover.

)
Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.

)
Replace the faulty bulb.

)
Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.

)
Refi t the rubber cover.

XI
192
PRACTICAL INFORMATION













Sidelamps


)
Rotate the bulb-holder a quarter
turn anti-clockwise.

)
Remove it from its housing.

)
Replace the faulty bulb.

)
Reposition the bulb-holder.

)
Rotate it a quarter turn clockwise
to reposition in its housing.

Direction indicators
The direction indicator bulb is locat-
ed underneath the main beam bulb.


)
Remove the rubber cover.

)

Pull on the bulb-holder to remove it.


)
Replace the faulty bulb.

)
Reposition the bulb-holder in the
bracket and push it in.

)
Refi t the rubber cover.

Integrated direction indicator
side repeaters
To change the repeater, press down-
wards fi rmly on the zone indicated
by the arrow, then pull the repeater.
Repeaters can be obtained from
a CITROËN dealer or a qualifi ed
workshop.

XI
193
PRACTICAL INFORMATION










Front foglamps (H11-55 W)


)

Insert the key in the notch A
, tilting
the bulb-holder cover, located un-
derneath the bumper, then insert
the key in the notch B
to remove it.


)
Undo the lamp.

)
Tilt the bulb-holder.

)
Change the faulty bulb.

)
Reposition the bulb-holder.

)
Do up the lamp and refi t the bulb-
holder cover fi rmly in place.



Rear foglamp (P21 W)


)
Pass your hand underneath the
bumper to reach the bulb-holder.

)
Rotate the bulb-holder a quarter
turn.

)
Pull on the bulb-holder.

)
Rotate the bulb a quarter turn to
remove it.

)
Replace the faulty bulb.

)
Fit the bulb.

)
Reposition the bulb-holder by
rotating it a quarter turn.

For the replacement of this type
of LED lamp, contact a CITROËN
dealer or a qualifi ed workshop.









Changing daytime running
lamps/sidelamps (LEDs)

XI
194
PRACTICAL INFORMATION


























Rear lamps (C4 Picasso)



1.
Direction indicators

(PY21W)


2.
Brake lamps/sidelamps

(P21/5W)


3.
Reversing lamp
(P21W

)



)
Identify the faulty bulb.

)
With the boot open, press on the
plastic cover A
, located close to
the lamp unit, to release it from
its housing.

)
Undo the two screws B
on the
side of the lamp unit and detach
the lamp unit by pulling it rear-
wards.

)
Disconnect the connector linking
the lamp unit with the tailgate.

)
Remove the bulb-holder.

)
Replace the bulbs.
To remove a bulb, rotate it a
quarter turn.
To r efi t the bulb, rotate it a quar-
ter turn in the other direction.

)
Reposition the bulb-holder.

)
Reconnect the connector to the
lamp unit.
Lamps mounted on the
bodywork


)
Identify the faulty bulb.

)
With the boot open, remove the
plastic cover on the tailgate.

)
Remove the bulb-holder from its
housing.

)
Replace the bulb.
To remove a bulb, rotate it a
quarter turn.
To r efi t the bulb, rotate it a quarter
turn in the other direction.

)
Reposition the bulb-holder.

)
Refi t the plastic cover.


Lamps mounted on the tailgate
)
Refi t the lamp unit on the body
and do up the two screws.

)
Reposition the plastic cover by
pressing on it.

XI
195
PRACTICAL INFORMATION


























Rear lamps (Grand C4 Picasso)



1.
Direction indicators
(PY21W)


2.
Brake lamps
(P21W)


3.
Reversing lamp
(P21W)


4.
Sidelamps (LEDs)

For this type of lamp, contact a
CITROËN dealer or qualifi ed
workshop.
Changing bulbs


)
Identify the faulty bulb.

)
With the tailgate open, undo the
3 screws located on the side of
the lamp unit and pull it rear-
wards to detach.

)
Disconnect the connector linking
the lamp unit to the boot. Do not
disconnect the LEDs.

)
Remove the seal.

)
Remove the bulb-holder.

)
Replace the bulbs.
To remove a bulb, rotate it a
quarter turn.
To fi t the bulb, rotate it a quarter
turn in the other direction.

)
Reposition the bulb-holder.

)
Refi t the seal.

)
Reconnect the connector to the
lamp unit.

)
Arrange the harness in the open-
ing provided in the body.

)
Refi t the lamp unit to the body
and fi t and tighten the 3 screws.








Number plate lamps
(W 5 W)


)
Insert a thin screwdriver into one
of the external holes of the lens.

)
Push it outwards to unclip it.

)
Remove the lens.

)
Change the faulty bulb.

XI
196
PRACTICAL INFORMATION







Third brake lamp with bulb
(W5W)


)
With the boot open, detach the
interior trim.

)
Undo the nuts.

)
Using a thin screwdriver, detach
the 3 retaining lugs.

)
Remove the lamp via the exterior
of the tailgate.

)
Remove the bulb-holder.

)
Change the faulty bulb(s).
To r efi t, carry out these operations in
reverse order.



Third brake lamp (LEDs)
For the replacement of this type
of LED lamp, contact a CITROËN
dealer or a qualifi ed workshop.



















Interior lighting


Interior lamp (1/W5W)
Detach the cover of the interior
lamp 1
with a thin screwdriver, close
to the button, to access the faulty
bulb.


Map reading lamps (2/W5W)
Detach the cover of the interior lamp.
To access the faulty bulb, detach
the partition for the reading lamp 2

concerned, as necessary.

Boot lamps (W5W)
Detach the unit by pushing it rear-
wards.


Torch (Krypton 3.6 V)


)
Open the tab.

)
Push with a fl at screwdriver in
the hole under the tab and re-
cover the bulb unit.

)
Open the bulb unit fully to change
the bulb.

XI
197
PRACTICAL INFORMATION
CHANGING A FUSE

Access to tools

The extraction tweezer A
is located
on the back of the dashboard fuse-
box cover.
For access to it:


)
open the glove box lid,

)
unclip the fusebox cover by pull-
ing the top right, then left,

)
pull the cover down,

)
remove the tweezer.



Changing a fuse



)
Use the special tweezer A
to re-
move the fuse from its housing
and check the condition of the
fi lament.

)
Replace the failed fuse with a
fuse of the same rating (same
colour)
.
A different rating may cause a
malfunction (risk of fi re).
If the fault occurs again soon after
replacing the fuse, have the electri-
cal system checked by a CITROËN
dealer or a qualifi ed workshop.


God

Failed


Tweezer A

Fuses in the dashboard


Your vehicle’s electrical
system is designed to oper-
ate with either standard or
optional equipment.
Before installing electrical equip-
ment or accessories on your vehi-
cle, consult a CITROËN dealer or a
qualifi ed workshop.
CITROËN declines all responsibil-
ity for the consequences and costs
that are caused by faults or repairs
on your vehicle resulting from the in-
stallation of accessories that are not
supplied and/or not recommended by
CITROËN and not installed according
to its instructions, particularly when
the energy consumption of all of the
additional accessories connected ex-
ceeds 10 milliamperes (Ma). Before replacing a fuse:


- the cause of the failure must be
identifi ed and rectifi ed,

- all electrical consumers must be
switched off,

- your vehicle must be stationary
with the engine off.
Identify the failed fuse by reference
to the tables and layout drawings
below.

XI
198
PRACTICAL INFORMATION

Access to the fuses


)
Open the glove box.

)
Undo the screw by a quarter turn
and pivot the housing.

Table of fuses



Fuse N°



Rating



Functions




F1



15 A

Rear screen wipe


F2



30 A

Locking and unlocking earth


F3



5 A

Airbags and pretensioners


F4



10 A

Multimedia, photochromic rear view mirror, particle
fi lter, diagnostic socket, air conditioning, manual
headlamp height adjustment


F5



30 A

Front windows, front door electronic control panel,
panoramic sunroof


F6



30 A

Rear windows


F7



5 A

Interior lamps, cooled glove box, radio


F8



20 A

Multifunction screen, radio, steering mounted
controls, multimedia, defl ation detection, alarm,
trailer


F9



30 A

Multimedia, front 12 V sockets, torch, radio


F10



15 A

Height corrector (suspension)


F11



15 A

Brake switch, ignition switch


F12



15 A

Parking sensors, automatic screen wipe and
lighting, passenger’s electric seat, lane departure
warning system, Hi-Fi amplifi er, trailer


F13



5 A

Engine relay unit (BSM), driver’s electric seat


F14



15 A

Air conditioning, Bluetooth
®
hands-free kit,
automatic gearbox lever, airbags, instrument panel


F15



30 A

Locking and unlocking


F16



-

SHUNT


F17



40 A

Heated rear screen


Fuses under the dashboard