2012 CITROEN C-CROSSER ECO mode
[x] Cancel search: ECO modePage 3 of 244
!
1
Your vehicle is fi tted with only some of the equipment
described in this document, depending on the trim
level, version and the specifi cations for the country
in which it is sold.
The fi ttin
g of electrical equipment or accessories
which are not recommended b
y CITROËN may result
in a
failure of your vehicle's electronic system. Please
note this specifi c warnin
g and contact a CITROËN
dealer to be shown the recommended equipment and
accessories.
CITROËN has a presence on every continent,
a complete product range,
bringing together technology and a permanent spirit of innovation,
for a modern and creative approach to mobility.
We thank you and congratulate you on your choice.
Happy motoring!
Key
safet
y warning
We draw your attention to the following...
contributes to the protection of the environment
refer to the page indicated
At the wheel of your new vehicle,
getting to know each system,
each control, each setting,
makes your trips, your journeys
more comfortable and more enjoyable.
Page 20 of 244
18
FAMILIARI
S
AT I
ON
Cruise control
This maintains a constant vehicle speed
programmed by the driver.
1."ON/OFF"
button: activation/deactivation of cruise control mode.
2."COAST SET"button: storing a driving speed then decreasing the cruising speed.
3."ACC RES"
button: increasing the cruising speed and recalling the stored speed.
4."CANCEL"
button: switching off the cruise control.
In order to be programmed or activated,
the vehicle speed must be higher than
25 mph (40 km/h) with at least second gear engaged.This detects obstacles
(person, vehicle,
tree, gate, ...) located behind the vehicle.
Th
e vehicle is fi tted with four sensors:
D. two side sensors.
E
. two central sensors.
Audible rear parking sensors
121
123
DRIVING SAFELY
Four wheel drive system
Three transmission modes are avail-
able and can be selected manually bythe driver to suit the circumstances:
A. Two wheel drive
(2WD),
B. Four wheel drive (4WD AUTO),
C. Four wheel drive (4WD LOCK).
11 9
Also...
You can change transmission modewhen stationary or when driving at aspeed below 60 mph (100 km/h).
Page 23 of 244
I
21
INSTRUMENT PANEL
Panel grouping together the dials and
warning/indicator lamps. These inform
the driver of the activation/deactivation
of a system or of the occurrence of a
fault.
3.
Instrument panel screen:
- Warning and status displays.
- Total and trip distance recorders.
- Service indicator.
- Coolant temperature.
- Trip computer information.
- Cruise control setting.
- Dashboard lighting and parameter
settings.
- Fuel level.
- Ambient temperature.
- Transmission mode.
Screen type 1
Screen type 2
1.
Rev counter.
2.
Speedometer.
Page 32 of 244
I
MONITORING
30
Prevention messages Information messa
ges (ignition at "ON")
Message
is on
Status of the system
2WD two wheel
drive system
Flashing When the "2WD" (2 wheel drive) mode is selected using the
transmission mode selector.
4WD four wheel
drive system
Flashing When the "4WD" (4 wheel drive) mode is selected using the
transmission mode selector.
This mode is the default mode.
4WD LOCK four
wheel drive system
Flashing When the "LOCK" (4 wheel drive) mode is selected using the
transmission mode selector.
Ambient
temperature
Fixed This indicates the ambient temperature.
When the vehicle is stationary or if the speed is below 12 mph (20 km/h)
the temperature displayed may not be the true temperature.
Display
is on
Cause
Solution - action
Observations
Service
indicator
Fixed Informs the driver of
the time remaining
before the vehicle's
scheduled service. Contact a CITROËN
dealer or a qualifi ed
workshop. This is displayed for a few
seconds when the ignition is
switched on.
Break
advised
Fixed Informs the driver that
they should stop to
take a break. You are advised to
take a break. This is displayed when the
driving time that you set
previously is reached.
An audible signal is heard
3 times and is then heard every
5 minutes until the vehicle stops.
Page 36 of 244
I
MONITORING
34
TRIP COMPUTER Average fuel consumption (l/100 km or km/l or mpg)
This is the average fuel
consumption since the
last zero reset.
This fi gure may change following a
change in the style of driving or the
relief resulting in a change in the cur-
rent fuel consumption.
Average speed (km/h
or mph)
This is the average
speed calculated since
the last zero reset.
Resetting the information to zero
When the ignition is switched on, the
zero reset switches automatically from
manual mode to automatic mode.
If dashes "---" are displayed for long
periods in place of the digits while
driving, contact a CITROËN dealer or
a qualifi ed workshop.
Current fuelconsumption (l/100 kmor km/l or mpg)
This is the average fuel
consumption during the
last few seconds of driving.
Information display
With the ignition on, press the INFO
button on the dashboard, to the right
of the instrument panel, several times
in succession to display the different
information:
- average fuel consumption,
- average speed,
- current fuel consumption. When the required information is
displayed, press the INFO
button for
more than two seconds to reset all of
the information to zero.
Automatic
If the ignition key remains in the
OFF position for more than 4 hours,
the information is reset to zero
automatically.
Page 38 of 244
I
MONITORING
36
Choice of fuel consumption units
You can choose between different units
for displaying fuel consumption. On the menu screen:
)
press the INFO
button to select
"UNIT"
.
)
press and hold the INFO
button for
a few seconds to display the "UNIT"
screen.
)
press the INFO
button to scroll the
units (km/L, L/100 km, mpg(US),
mpg(UK) and RETURN) in succes-
sion.
)
press and hold the INFO
button for
a few seconds to confi rm your se-
lection. In this case, the distance, speed and
quantity of fuel units will also be changed
in accordance with your choice of fuel
consumption unit. If the battery is disconnected, the
settings memory is cleared and
the default unit (km/L) is restored
automatically.
Choice of temperature displayunits
You can choose between different units
for displaying the temperature.
On the menu screen:
)
press the INFO
button to se-
lect the temperature unit set-
ting symbol (thermometer).
)
press and hold the INFO
button for
a few seconds to alternate between
the units (°C and °F).
The mode selected is confi rmed.
If the battery is disconnected, the
settings memory is cleared and the
default unit (°C) is restored automati-
cally.
Options for resetting average fuel consumption and average
speed
You can choose between two average
fuel consumption and average speed
resetting modes:
- automatic reset ( choice 1)
,
- manual reset (choice 2)
.
On the menu screen:
)
press the INFO
button to select:
)
press and hold the INFO
button for a
few seconds to switch in succession
from resetting mode 1
(automatic)
to resetting mode 2 (manual)
.
The mode selected is confi rmed.
Page 39 of 244
I
MONITORING
37
Choice of display language(LANGUAGE)
You can choose between different
languages for the screen.
On the menus screen:
)
press the INFO
button to select
"LANGUAGE"
.
)
press and hold the INFO
button
for a few seconds to display the
"LANGUAGE"
screen.
)
press the INFO
button to scroll
through the languages (Japonais,
English, Deutsch, Français, Espa-
nol, Italiano, "---" and RETURN) in
succession.
)
press and hold the INFO
button for
a few seconds to confi rm your se-
lection.
If you select the "---" setting, no
message will be displayed in
message display situations. If the battery is disconnected, the
settings memory is cleared and
the default language (ENGLISH) is
restored automatically.
Activation/deactivation of the"INFO" button sound
You can activate or deactivate the INFO
button sound.
On the menus screen:
)
press the INFO
button to
select the INFO
button
sound activation/deactiva-
tion symbol (located on
menu 2/3)
.
)
press and hold the INFO
button for
a few seconds to alternate between
the choices (ON, OFF).
The mode selected is confi rmed.
If the battery is disconnected, the
settings memory is cleared and
the default choice (ON) is restored
automatically.
Changing the display interval
of the "BREAK REMINDER"
message
You can change the display interval of
the "BREAK REMINDER"
message.
On the menu screen:
)
press the INFO
button to select
"ALARM" (located on menu 2/3)
.
)
press and hold the INFO
button
for a few seconds to display the
"ALARM"
screen.
)
press the INFO
button to select
the display interval of the "BREAK
REMINDER"
message.
)
press and hold the INFO
button for
a few seconds to confi rm.
If the battery is disconnected, the
settings memory is cleared and
the default value (OFF) is restored
automatically.
Page 41 of 244
I
MONITORING
39
MONOCHROME SCREEN
This provides the following information:
- the time,
- audio system information (refer to
the "Audio and Telematics" section).
Setting the time
The digital clock can be set in automatic
mode
or in manual mode
.
Selecting the Setting
Select the automatic mode
or the
manual mode
as follows:
)
Press button A
"PWR" to switch on
the audio system.
)
Access the setting mode by pressing
button B
"TUNE" for approximately
2 seconds.
)
Press button B
"TUNE" several
times to scroll through the various
menus and select the CT menu
(clock time).
The order of the menus is the following:
AF/CT/REG/TP-S/PTY display language/
SCV/PHONE/Functions setting mode
OFF.
Automatic mode
This mode permits automatic setting
of the local time using the signal from
RDS stations.
The symbol "CT"
appears on the screen.
Manual mode
This mode permits manual setting of
the time using the audio equipment
buttons.
It can also be used when the "Automatic
mode" displays an inaccurate time, when
the local RDS stations are broadcasting
from a different time zone.