2012 AUDI A8 oil dipstick

222 Check ing and filling
(D Windshield/headlight washer
t . (
PP. ) con ainer ""' .......... ... . 234
@ Jump start point( -) with hex
head screw . .. .......... ... . 233 , 270
@ Jump start point( +) under a cov-
er . ..... .............. ... . 233, 270
© Eng ine oil filler cap(~) . . . . . 225
® Brake fluid reservo ir ((0)) . . . . . 229
® Coolant expansion tank (-L) . . . 227
0 Power steering reservoir . . . . . . 191
@ Oil dipstick . . . . . . . . . . . . . . . . . 225
The engine oil filler neck (item@) may be lo­
cated in a different area depend ing on the ver­
sion of the engine .
& WARNING
Before you check anything in the engine
compartment, always read and heed all
WARNINGS¢ .&.
in Working in the engine
compartment on page 219.
Engine oil
Engine oil specifications
The engine oil used in your Audi needs the
right kind of oil.
-
The engine in your Audi is a sophisticated
powerp lant that was built to exacting specifi­
cations . This engine needs the r ight kind of
engine o il that meets spec ificat ions regarding
qua lity and viscos ity so that it can run
smoothly and reliably . Choos ing the righ t oi l
and changing oil within the time and mileage
interva ls printed in your vehicle 's Warranty
&
Maintenance book let matters a lot more to­
day than it did years ago. Audi has developed
a special quality standard for engine oil that
will help assure that your veh icle's eng ine will
get the lubrication it needs for proper opera­
tion.
Modern engine lubrication has taken a quan­
tum leap in the last few years. Many synthetic
oils ava ilable today provide better engine lu­
brication that can outlast trad itional petrole -u
m -based oils, making them a smart choice
for use throughout the life of your Audi.
Whether you use synthet ic o r petro le um­
based eng ine oil, the oi l that you use m ust
conform to Audi's oi l quality standard
VW 502 00 to help keep your vehicle's engine runn ing smooth ly and help prevent the for­
mation of harmfu l deposits, sometimes called
"sludge," that over time can lead to expensive
repairs.
At the time of printing, engine oils ava ilable in
the U.S. and Canada that meet the exacting
specifications of Audi oil standard VW 502 00
are synthet ic eng ine oils . Th is does not mean,
howeve r, that every synthetic engine oil will
meet Audi o il standard VW 502 00 . So always
be su re that you use an approved oil.
To help prevent the formation of harmfu l de ­
pos its use only o il w ith the following specifi­
cations pr inted on the o il conta iner:
Audi oil standard VW 502 00
Oil container labels may carry the specifica­
tion sing ly or in combination with other desig ­
nations and oil quality standards.
V is cos ity
Engine o ils are graded a ccord ing to their vis­
cosity . The proper vis cos ity grade oil fo r yo ur
engine depends on climactic or seasona l con­
ditions where you drive. You can use oil with a
viscosity grade of SAE 5W40 across a ll tem­
perature ranges for norma l driving conditions.
However, if engine oil v iscosity g rade SA E
SW40 is not available , you can also use viscos ­
ity grade SAE SW-30 or SAE OW-40 as long as
it meets Audi oil qua lity standard VW 502 00
specifications.
Beca use engine oi l that meets the Audi oil
standard may not be availab le everywhere
when you need it, we strong ly recommend
that you a lways carry with you an extra quart
( li ter) of oil that express ly conforms to the
VW 502 00 spec ificat ion, in case you have to
top off the o il while o n the road . ..,_

Checking the engine oil level
App lies to vehicles: with o il dipstick
Fig. 177 Oil dips tick: mark ing fields
Before you check anything in the engine com­
partment,
always read an heed all WARN­
INGS
r=> poge 219.
Determining the oil level
• Park your vehicle on a leve l surface.
• let the engine run in idle briefly while it is
at operating temperature and then shut the
engine off.
• Wait approximately two minutes.
• Remove the oil d ipst ick . Wipe off the oil
dipstick with a clean cloth and insert it all
the way in aga in .
• Remove the dipstick again and then read
the oil level
r=> fig. 177. Add engine oil if nec­
essa ry
r=> page 225.
Oil level in the G) area
• Do not add any oil.
Oil level in the @area
• You may add oil. After adding oil, the level
should be in the
G) area.
Oil level in the 0 area
• You must add oi l. After adding oil, the leve l
shou ld be in the
G) area .
Depending on the way the vehicle is driven
and the operating conditions, oil consumption
can be up to 1/2 quart per 600 miles (0.5 liter
per 1,000 km). Consumption may be higher
within the f irst 3,000 miles (5,000 km) . Be­
cause of this, the engine oil level must be
checked regularly . It would be best to check
Checking and filling 225
each time you refue l your vehicle and before
long drives .
Adding engine oil~
Fig. 178 Eng ine co mpa rtment: cove r on th e engi ne oi l
filler neck
Before you check anyth ing in the engine com­
partment,
always read and heed all WARN­
INGS
r=> A in Working in the engine comport­
ment on page 219 .
• Unscrew the cap "l!:;r; to the engine oil filling
hole
r=> fig. 178, r=> page 221.
• Carefully top off with the appropr iate oil in
0 .5 liter doses .
• Check the oil level aga in after two minutes
,:;> page 224 or r=> page 225.
• To p off the oil again, if necessary.
• Sc rew the cap back on the filling hole .
8_ WARNING
-While topping off, the oi l must not come
in contact with hot engine parts -fire
hazard!
- The oi l filler cap must be properly se­
cured to prevent oil from being sprayed
on the hot engine and exhaust system
when the engine is running -fire hazard!
- If your skin has come in contact with the
engine oil, you must subsequently
cleanse it thoroughly.
(D Note
- Check the oil leve l. If the message
Please reduce oil level appears, contact
your authorized Audi dealer or other
qualified workshop to have excess oil ex-
tracted if necessary .
IJJJ,