2012 Alfa Romeo Giulietta light

179
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
REAR LIGHT CLUSTERS
These contain the taillights, brake lights, direction indicators (bulbs
in fixed light cluster), reverse light and rear fog light (bulb in light
cluster on boot hatch).
Removing the fixed light cluster
Proceed as follows:
❍open the boot and loosen the rear light cluster fastening screw
A-fig. 135;
❍extract the light cluster by removing it with both hands in the
direction of the arrow (see fig. 135);
❍connect the electrical connector and replace the bulb concerned.
TAILLIGHTS/BRAKE LIGHTS
These are LEDs. Contact Alfa Romeo Authorized Services to replace
these lights.
DIRECTION INDICATORS
With the light cluster removed, to replace the bulb undo the two
screws A-fig. 136, remove the bulb holder and replace bulb B.
fig. 135A0K0184mfig. 136A0K0205m

180
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
REAR FOG LIGHTS/REVERSING LIGHTS
To replace the bulbs proceed as follows:
❍open the boot and remove the cover A-fig. 137 using a screw-
driver in the point indicated by an arrow;
❍remove the connector A-fig. 138 and extract the bulb holder
assembly by operating on the retaining tab B and then by loos-
ening the screw C;
❍remove the bulb by pushing it slightly and turning it anticlock-
wise fig. 138;
D: reverse light bulb
E: fog light bulb
❍refit the bulb holder assembly positioning it correctly, fasten
screw C and then fix it by means of the retaining tab B. Then
refit the cover A-fig. 137.
fig. 137A0K0176mfig. 138A0K0177m
IMPORTANT Protect the tip of the screwdriver with a cloth to pre-
vent scratching when removing the cover A-fig. 137.

181
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
THIRD BRAKE LIGHTS
These are LEDs and are located on the spoiler integrated on the
boot hatch. Contact Alfa Romeo Authorized Services to replace these
lights.
NUMBER PLATE LIGHTS
To change the bulb proceed as follows:
❍remove number plate lights group A-fig. 139;
❍turn bulb holder B-fig. 140 anticlockwise, remove bulb C and
replace it.
fig. 139A0K0147mfig. 140A0K0146m

182
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
CHANGING AN INTERIOR BULB
FRONT CEILING LIGHT
To change the bulb, proceed as follows:
❍remove courtesy light A-fig. 141 by applying leverage at the
points shown by the arrows;
❍open flap B-fig. 142 replace bulb C, releasing it from the side
contacts. Make sure that the new bulbs are correctly secured
between the contacts;
❍close flap B-fig. 142 and secure courtesy light A-fig. 141 in
its housing.
fig. 141A0K0090m
fig. 142A0K0089m
fig. 143A0K0062m
REAR CEILING LIGHT
To change the bulb, proceed as follows:
❍remove courtesy light A-fig. 143 by applying leverage at the
points shown by the arrows;

183
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
❍open flap B-fig. 144, replace bulb C, releasing it from the side
contacts. Make sure that the new bulbs are correctly secured be-
tween the contacts;
❍close flap B-fig. 144 and secure courtesy light A-fig. 143 in
its housing.
BOOT LIGHT
To change the bulb, proceed as follows:
❍open the boot and extract the light A-fig. 145 by operating in
the point shown by the arrow;
❍open the protection B-fig. 146 and replace the bulb;
❍close the protection B on the lens;
❍refit the light A-fig. 145 by inserting in its correct position on
one side and then on the other and then press the other side
until you hear it click.
fig. 146A0K0148m
fig. 145A0K0173m
fig. 144A0K0091m

184
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
GLOVE COMPARTMENT LIGHT
To change the bulb, proceed as follows:
❍open the glove compartment and extract the light A-fig. 147;
❍open the protection B and replace the bulb;
❍re-close the protective cover B on the lens;
❍refit the light A by inserting it in its correct position firstly on
one side and then on the other until it clicks into place.
fig. 147A0K0172m
COURTESY LIGHT
(for versions/markets, where provided)
For the replacement of these bulbs, contact Alfa Romeo Authorized
Services.

185
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
PUDDLE LIGHTS
To change the bulb, proceed as follows:
❍open the door (front or rear) and extract the light A-fig. 149;
❍open the protection B and replace the bulb;
fig. 149A0K0149m
❍re-close the protective cover B on the lens;
❍refit the light by inserting it in its correct position firstly on one
side and then on the other until it clicks into place.

7.5
7.5
7.5
7.5
15
15
7.5
7.5
10F91
F90
F12
F13
F12
F13
F93
F92
F32155
155
155
155
155
155
155
155
155
191
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
FUSE TABLE
LIGHTS FUSE AMPS FIGURE
Right main beam headlight
Left main beam headlight
Right dipped beam headlight
(versions with halogen headlights)
Left dipped beam headlight
(versions with halogen headlights)
Right dipped beam headlight
(versions with Bi-Xenon headlights)
Left dipped beam headlight
(versions with Bi-Xenon headlights)
Right fog light
Left fog light
Boot light/Sun visor lights/
Door puddle light/Glove compartment light/
Front/rear ceiling light
Radionavigator display