8-41
8 2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU27480Installing a wheel 1. Install the wheel and the nuts.NOTE:When installing the wheel, make sure its arrow
mark points toward the rotating direction of thewheel.2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torques.1. Nut
1. Arrow markTightening torques:
Front wheel nut:
45 Nm (4.5 m·kgf, 32 ft·lbf)
Rear wheel nut:
45 Nm (4.5 m·kgf, 32 ft·lbf)
U10P60E0.book Page 41 Thursday, June 15, 2006 4:19 PM
