2011 TOYOTA YARIS HATCHBACK Owners Manual

Page 321 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 5
When trouble arises
309
5-1. Essential information
If your vehicle needs to be towed
Before towingThe following may indicate a problem with your transmission. Contact
your Toyota dealer before towin

Page 322 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 310 5-1. Essential information
nEmergency towin g procedure
Release the parking brake.
Put the transmission in N.
Turn the engine switch to the ACC (engine off) or ON (engine run-
ning) position.
CAUT

Page 323 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 5
When trouble arises
311
5-1. Essential information
Installing towing eyelet
Remove the eyelet cover using a
flathead screwdriver. 
To protect the bodywork, place a
rag between the screwdriver and
th

Page 324 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 312 5-1. Essential information
Towing with a sling-type truck
Towing with a wheel lift-type truck from the frontRelease the parking brake.
CAUTION
nInstalling towing eyelet to the vehicle
Make sure th

Page 325 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 5
When trouble arises
313
5-1. Essential information
Towing with a wheel lift-type truck from the rear
Vehicles with an automatic trans-
mission: Use a towing dolly
under the front wheels.
Vehicles wi

Page 326 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 314 5-1. Essential information
Using a flat bed truckIf your Toyota is transported by a
flat bed truck, it should be tied
down at the locations shown in
the illustration.
If you use chains or cables t

Page 327 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 5
When trouble arises
315
5-1. Essential information
If you think something is wrong
If you notice any of the following symptoms, your vehicle probably
needs adjustment or repair. Contact your Toyota

Page 328 of 428

TOYOTA YARIS HATCHBACK 2011  Owners Manual 316
5-1. Essential information
Fuel pump shut off system
Follow the procedure below to restart the engine after the system is
activated.Turn the engine switch to the ACC or LOCK position.
Restart the