2011 TOYOTA SIENNA Navigation Manual

OTHER FUNCTIONS
137
(a) Automatic transition
You can select a function that enables au-
tomatic return to the navigation screen
from the audio screen.
5U5A83F
Select “ON” or “OFF” and then touch
“OK”.
“ON”: The navigation screen automatical-
ly returns from the audio screen 20 sec-
onds after the end of audio screen opera-
tion.
“OFF”: The audio screen remains on. (b) Switch color
You can select the color of the touch
screen buttons.
5U5A84F
Select “Green” or “Orange” and then
touch “OK”.

OTHER FUNCTIONS
138
(c) Delete personal data
The following personal data can be de-
leted or returned to their default settings:
Maintenance conditions
Maintenance information “off” set-
ting
Memory points
Areas to avoid
Previous points
Route trace
User selection settings
This function is available only when the ve-
hicle is not moving.
5U5A85F
1. Touch “Delete personal data”.
The “Delete personal data” screen ap-
pears.
5U5A86F
2. Touch “Delete”.
The “Confirmation to delete all personal
data” screen appears.
5U5A87F
3. Touch “Yes”.

OTHER FUNCTIONS
139
You can set a beep sound off.
U5001SENI
1. Push the “INFO” button.
5U5B12F
2. Touch “Beep Off”.
“Beep Off” is highlighted.
To switch the beep sound on, touch “Beep
Off” again. The language of
the touch screen buttons,
pop−up messages and the voice guidance
can be changed.
U5001SENI
1. Push the “INFO” button.
5U5B02F
2. Touch “Language”.
Beep settingSelecting a language

OTHER FUNCTIONS
140
5U5B01F
3. Touch “English”, “Français” or “Es-
pañol” to select a language.
If a screen other than for the navigation
system is displayed, the current screen
would change to the “CAUTION” screen
by pushing the “MAP/VOICE” , “DEST” or
“MENU” button.
4. Touch “OK”.
The language is changed and the screen
returns to the map display.

SECTION 6
AUDIO SYSTEM
141
AUDIO SYSTEM
Quick reference 142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. .
 Using your audio system 143
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Some basics 143 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . .
Radio operation 147 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\

CD player operation 155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Audio remote controls 166 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Audio system operating hints 167 . . . . . . . . . . . . . . . . . . . . . . . . . . .

AUDIO SYSTEM
142
Operations such as selecting a preset station and adjusting the sound balance are c\
ar-
ried out on the touch screen. To display the audio screen, push the “AUDIO” button.
6U5069aX
1Function menu display screen
To control the radio or CD player,
touch the touch screen buttons. For
details, see page 144.
2“AUDIO” button
Push this button to display the audio
control screen. For details, see page
143.
3“” button
Push this button to insert or eject a
disc. For details, see pages 155 and
157.
4“DISC·AUX” button
Push this button to turn the CD player
and AUX on. For details, see pages
144, 146 and 157.
5“FM” button
Push this button to choose an FM sta-
tion. For details, see pages 144 and
147.
6“AM·SAT” button
Push this button to choose an AM or
SAT station. For details, see pages
144 and 147.
7“TUNE·SEEK/TRACK” button
Push either side of this button to step
up or down the frequency, or to ac-
cess a desired track or file. For de-
tails, see pages 147, 148, 151, 158
and 162.
8“PWR·VOL” knob
Push this knob to turn the audio sys-
tem on and off, and turn it to adjust the
volume. For details, see page 143.
Quick reference

AUDIO SYSTEM
143
This section describes some of the basic
features of your audio system. Some in-
formation may not pertain to your system.
Your audio system works when the engine
switch is in “ACC” or “ON” position.
NOTICE
To prevent the battery from being dis-
charged, do not leave the audio sys-
tem on longer than necessary when
the engine is not running.
CAUTION
For vehicles sold in U.S.A. and
Canada:
 Part 15 of the FCC Rules
FCC Warning:
Changes or modifications in con-
struction not expressly approved by
the party responsible for compliance
could void the user’s authority to op-
erate the equipment.
 Laser products
 Do not take this unit apart or
attempt to make any changes
yourself. This is an intricate
unit that uses a laser pickup to
retrieve information from the
surface of compact discs. The
laser is carefully shielded so
that its rays remain inside the
cabinet. Therefore, never try to
disassemble the player or alter
any of its parts since you may
be exposed to laser rays and
dangerous voltages.
 This product utilizes a laser.
Use of controls or adjustments
or performance of procedures
other than those specified
herein may result in hazardous
radiation exposure.
Turning the system on and off
U6001SENI
“AUDIO”: Push this button to display
touch screen buttons for audio system (au-
dio control mode).
“PWR·VOL”: Push this knob to turn the
audio system on and off. Turn this knob to
adjust the volume. The system turns on in
the last mode used.
You can select the function that enables
automatic return to the previous screen
from the audio screen. See “(a) Automatic
transition” on page 137 for details.
Using your audio system —
— Some basics

AUDIO SYSTEM
144

Switching between functions
U6002SENI
Push “AM·SAT”, “FM” or “DISC·AUX”
button to
turn on the desired mode. The
selected mode turns on immediately.
Push these buttons if you want to switch
from one mode to another.
If the disc is not inserted, the “CD” screen
will not appear.
6U5D70F
6U5D71aF
6U5D72aF
The function buttons for radio and CD play-
er operation are displayed on the screen
when the audio control mode is selected.