2011 TOYOTA LAND CRUISER buttons

AUDIO/VIDEO SYSTEM
147

The touchscreen buttons for radio,
DVD changer, Bluetooth audio player,
AUX and USB memory/iPod operation
are displayed on the screen when the
audio control mode is selected. Touch
them lightly and directly on the screen.
Touch the tab to select the desired mode
when the audio control mode is selected.
The selected switch is highlighted.
INFORMATION
If the system does not respond to a
touch of a touchscreen button,
move your finger away from the
screen and then touch it again.
You cannot operate dimmed
touchscreen buttons.
Wipe off fingerprints using a glass
cleaning cloth. Do not use chemi-
cal cleaners to clean the touch
screen.

AUDIO/VIDEO SYSTEM
151
(h) AUX port
The sound of portable audio players
connected to the AUX port can be enjoyed.
Push the “AUX·USB” button, or push the
“AUDIO” button to display audio screen
and touch “AUX” tab to switch to AUX
mode. When the portable audio player is
not connected to the AUX port, the tab will
tone down. For details, refer to the
“Owner’s Manual”.
(i) USB port
It is available to connect a USB
memory/iPod device with the USB port.
When the USB memory/iPod is not
connected to the USB port, the tab will tone
down. For details , see “(a) Connecting a
USB memory or iPod” on page 204. (a) Listening to the radio
Push the “AM·FM” (Type A)/“AM” or
“FM” (T
ypeB) buttons, or push the “AU-
DIO” button to display audio screen
and touch “AM” or “FM” tabs to choose
either an AM or FM station.
“AM”, “FM1” or “FM2” appears on the
screen.
Type A only —
When you push the “SAT” button or touch
“SAT” tab on AUDIO screen, “SAT1”,
“SAT2”, “SAT3” station appears on the
screen. For details about satellite radio
broadcast, see “— Radio operation (XM
Satellite Radio broadcast)” on page 156.
— Radio operation

AUDIO/VIDEO SYSTEM
158
(e) Presetting a channel
1. Tune in the desired channel.
2. Touch one of the channel selector
buttons (1 — 6) and hold it until a beep
is heard.
This sets the channels to the touch −
screen button and the name and number
of the channel appears on the touch −
screen button.
Each touch− screen button can store three
SAT channels. To change the preset chan-
nel to a different one, follow the same pro-
cedure.
The preset channel memory is cancelled
when the power source is interrupted by
battery disconnection or a blown fuse. (f) Selecting a channel
Tune in the desired channel using one of
the following methods.
Preset tuning:
Touch the channel selec-
tor button (1 — 6) or push the “
” or “”
button of “CH·DISC” for the channel you
want. The button (1 — 6) is hig hlighted and
channel number appears on the display.
To select channel within the current
category: Push the “
” or “” button of
“SEEK·TRACK” . The radio will step up or
down the channel within the current chan-
nel category. Touch “TypeSeek”. The ra-
dio will step up the channel within the cur-
rent channel category.
To scan the currently selected channel
category: Touch “SCAN” briefly. “SCAN”
appears on the display. The radio will find
the next channel in the same channel cate-
gory, stay there for a few seconds, and
then scan again. To select a channel,
touch “SCAN” a second time.
To scan the preset channels: Touch
“SCAN” and hold it until you hear a beep.
“P.SCAN” appears on the display. The ra-
dio will find the next preset channel, stay
there for a few seconds, and then move to
the next preset channel. To select a chan-
nel, touch “SCAN” a second time.

AUDIO/VIDEO SYSTEM
185
CHANGING THE ANGLE
The angle can be selected for discs that
are multiangle compatible when the
angle mark appears on the screen.
Each time you touch “Change”, the
angle is selected from the ones stored
in the discs and changed.
When you touch
, and the previous
screen returns. SETUP MENU
There are initial setting buttons on the
“Setup Menu” screen.
After you change the initial setting, touch
. The initial setting screen will be
turned off and return to the picture
previously.
When “Default” is touched, all menus are
initialized.
The initial setting can be changed.

AUDIO/VIDEO SYSTEM
223

DVD video and DVD audio
Push “OPTION” if no icons are shown
while watching a DVD video or DVD audio,
and following screens appear.
DVD video
DVD audio
“Settings”: Selecting this will display set-
ting screen.
“Hide Buttons”: Selecting this will turn off
the icons from the screen.
If “
” appears on the screen when you
select a control, the operation relevant to
the control is not permitted. DESCRIPTION OF DVD VIDEO CON-
TROLS
“Menu” and “Top Menu”:
If you select
any of the above controls, the menu
screen for DVD video appears. (For the
operation, see the manual that come with
the DVD video disc provided separately.)
: Selecting this will fast rewind dur-
ing playback.
: Selecting this will stop the video
screen.
: Selecting this will pause/resume
the video screen.
: Selecting this will fast forward dur-
ing playback and forward frame by frame
during pause.

AUDIO/VIDEO SYSTEM
230
SETUP MENU
Select “Setup” on the settings screen.
There are initial setting buttons on the
“Setup Menu” screen.
After you change the initial setting, select
“OK”. The initial setting screen will be
turned off and return to the picture
previously.
When “Default” is selected, all menus are
initialized.
The initial setting can be changed.
Audio language (DVD video only)
You can change the audio language.
1. Select “Audio Language”.
2. Select the language you want to
hear on the “Audio Language” screen.
If you cannot find the language you want to
hear on this screen, select “Other” and
enter a language code. For the entry of
language code, see the following “ENTER
AUDIO LANGUAGE CODE”.
To return to the “Setup Menu” screen, se-
lect
.
Subtitle language
You can change the subtitle language.
1. Select “Subtitle Language”.
2. Select a language you want to read
on the “Subtitle Language” screen.
If you cannot find the language you want to
read on this screen, select “Other” and
enter a language code. For the entry of
language code, see the following “ENTER
AUDIO LANGUAGE CODE”.
To return to the “Setup Menu” screen, se-
lect
.
DVD language
You can change the language on the
DVD video menu.
1. Select “DVD Language”.
2. Select the language you want to
read on the “DVD Language” screen.
If you cannot find the language you want to
read on this screen, select “Other” and
enter a language code. For the entry of
language code, see the following “ENTER
AUDIO LANGUAGE CODE”.
To return to the “Setup Menu” screen, se-
lect
.

AUDIO/VIDEO SYSTEM
233

Video CD
Push “OPTION” if no icons are shown
while watching a video CD, and following
screen appears.
“Settings”: Selecting this will display set-
ting screen.
“Hide Buttons”: Selecting this will turn off
the icons from the screen.
If “
” appears on the display when you
select a control, the operation is not per-
mitted. DESCRIPTION OF VIDEO CD
CONTROLS
:
Select this to fast rewind during
playback.
: Selecting this will stop the video
screen.
: Use this to pause/resume the vid-
eo screen.
: Select this to fast forward during
the playback and start playing frame by
frame during pause.

AIR CONDITIONING
250
Operations such as changing the air outlets or fan speed are carried out\
on the touch
screen. To display the air conditioning touch screen, push the “CLIMATE” button.
1Driver side temperature display
(In degrees Fahrenheit or Centi-
grade) 252. . . . . . . . . . . . . . . . . . . . .
2Air flow control touchscreen but-
tons 254
. . . . . . . . . . . . . . . . . . . . . .
3Rear air conditioning control
touchscreen button 257
. . . . . .
4Passenger side temperature dis-
play
(In degrees Fahrenheit or Centi-
grade) 252 . . . . . . . . . . . . . . . . . . . . .
5“4ZONE”
(Temperature setting mode change
touch−screen button) 253
. . . . . . . .
6“A/C” 256
. . . . . . . . . . . . . . . . . . . . .
7Fan speed control touchscreen
buttons 255
. . . . . . . . . . . . . . . . . . .
8Windshield wiper deicer button
Owner’s Manual
. . . . . . . . . . . . . . . .
9Air intake control button 256
. . . .
10“REAR” button
Owner’s Manual
. . . . . . . . . . . . . . . .
11Micro dust and pollen filter button
258
. . . . . . . . . . . . . . . . . . . . . . . . . . .
12Windshield air flow button
257
. . . . . . . . . . . . . . . . . . . . . . . . . . .
13“OFF” button 252
. . . . . . . . . . . . . .
14“AUTO” button 252
. . . . . . . . . . . .
15“CLIMATE” button
(Air conditioning operation screen
display button) 251 . . . . . . . . . . . . . .
Automatic air conditioning controls